SYS-CON MEDIA Authors: Adine Deford, Cynthia Dunlop, Harry Trott, Xenia von Wedel, Peter Silva

News Feed Item

IMX Resources Discovers Two New High Grade Nickel Sulphide Lenses at Lightning Target, Ntaka Hill

Highlights

WEST PERTH, AUSTRALIA -- (Marketwire) -- 11/06/12 -- IMX Resources Limited (ASX:IXR)(TSX:IXR)(TSX:IXR.WT) ('IMX' or 'the Company') reports the discovery of two new high grade nickel sulphide lenses from the Lightning target located 400m southeast of Sleeping Giant at the Ntaka Hill Nickel Sulphide Project. The project is located approximately 250km west of the port town of Mtwara, and is part of the 100% owned Nachingwea property in south eastern Tanzania.

A recent single diamond drill hole totalling 392.3 metres was drilled at Lightning, 100m south of H Zone to follow-up high grade nickel sulphide mineralisation and a new off hole EM anomaly identified from previous drilling in 2011(1) (Figure 1). The new hole NAD12-281 intersected a zone of strongly disseminated to net-textured sulphides grading 1.92% Ni and 0.26% Cu over 4.5m from 263m, including a 1.2m interval grading 3.03% Ni and 0.32% Cu.

A second sulphide lens of 3.2m at 1.02% Ni and 0.17% Cu from 362.2m corresponds to the deeper off hole anomaly interpreted from borehole EM in 2011. This deeper lens lies within an 87.1m wide disseminated nickel sulphide zone grading 0.41% Ni and 0.1 % Cu from 299.9m depth and can be correlated with mineralisation intersected in hole NAD11-252 (1.41% Ni and 0.35% Cu over 2.5m) located 95m down-dip and 25m south of NAD12-281. This intersection highlights the depth potential of the Ntaka Intrusion to host additional high grade nickel mineralisation below the current limit of drilling.

MD Neil Meadows commented "The discovery of multiple lenses of high grade nickel sulphides at Lightning continues to demonstrate the exceptional exploration potential of the Ntaka Hill Intrusion. New mineralisation at Lightning and the recently announced discovery of the Zeppelin Zone highlight the potential for a significant increase in mineral resources and projected mine life for the Ntaka Hill Nickel Sulphide Project."

Drilling and BHEM results from current hole NAD12-281 and previous holes NAD12-252 and NAD08-171EXT at the Lightning target indicate the presence of multiple, stacked, west-dipping sulphide lenses. Additional drilling is required to define the extents of these lenses.

NEIL MEADOWS, Managing Director

To view Figure 1. Location of Lightning target, Ntaka Hill, please visit the following link: http://media3.marketwire.com/docs/IXRfig1.pdf

Table 1: Summary of Assay Results


Ntaka Hill Exploration Targets, Nachingwea Property, Tanzania               
----------------------------------------------------------------------------
Drill hole Location    Az/Dip Length  From   To     Interval %Ni  %Cu  %Co  
(NAD12)    East/ North        (m)     (m)    (m)    (m)                     
           UTM:WGS84                                                        
----------------------------------------------------------------------------
Lightning Target                                                            
----------------------------------------------------------------------------
281        450624mE    93/-69 392.3   162.20 162.60 0.40     1.97 0.49 0.04 
           8883125mN                                                        
                                      176.00 178.70 2.70     1.04 0.21 0.03 
                                                                            
                                      238.00 241.20 3.20     0.92 0.15 0.04 
                                                                            
                                      263.00 267.50 4.50     1.92 0.26 0.04 
                              Incl.   263.00 264.20 1.20     3.03 0.32 0.06 
                                      266.00 266.80 0.80     2.95 0.42 0.06 
                                                                            
                                      299.90 387.00 87.10    0.41 0.10 0.02 
                              Incl.   318.60 365.40 46.80    0.50 0.12 0.02 
                              Incl.   362.20 365.40 3.20     1.02 0.17 0.04 
----------------------------------------------------------------------------
Notes:                                                                      
Intervals represent core lengths, not necessarily true widths.              
Pt, Pd and Au assay results are not reported because in general, they are   
less than 1.0 g/t on a combined basis.                                      

Competent Persons / Qualified Person / NI 43-101 Statement

Information in this report relating to exploration results is based on data collected under the supervision of, or compiled by Patricia Tirschmann, P. Geo., who holds the position of Vice President, Exploration and is a full time employee of IMX Resources. Ms. Tirschmann is a registered member of the Association of Professional Geoscientists of Ontario and has sufficient relevant experience as a qualified person as defined by NI 43-101 and a competent person under the Australian JORC (2004). Ms. Tirschmann consents to the inclusion of the data in the form and context in which it appears, and approves this disclosure.

Quality Control

The drilling was completed by Capital Drilling (Tanzania) Limited. Drill core samples (NQ) are cut in half by a diamond saw on site. Half of the core is retained for reference purposes. Samples are generally 1.0 metre intervals or less at the discretion of the site geologists. Sample preparation is completed at the ALS Chemex preparation lab in Mwanza, Tanzania. Sample pulps are sent by courier to the ALS Chemex analytical laboratory in Vancouver, Canada. Blank samples and commercially prepared and certified Ni sulphide analytical control standards with a range of grades are inserted in every batch of 20 samples or a minimum of one per sample batch. Analyses for Ni, Cu and Co are completed using a peroxide fusion preparation and ICP-AES finish (Analytical Code ME-ICP81). Analyses for Pt, Pd, and Au are by fire assay with an ICP-AES finish (Analytical Code PGM-ICP23).

About IMX Resources Limited

IMX Resources Limited is an Australian based mining and base & precious metal exploration company dual-listed on the Australian and Toronto stock exchanges (ASX:IXR)(TSX:IXR)(TSX:IXR.WT), with exploration projects located in Australia, Africa and North America.

In Africa, IMX owns and operates the highly prospective Nachingwea Exploration Project in southeast Tanzania, which includes the potentially word-class Ntaka Hill Nickel Sulphide project. Nachingwea is highly prospective for nickel and copper sulphide, gold and graphite mineralisation. The Ntaka Hill Nickel Sulphide Project is one of the world's best un-developed nickel sulphide projects and has the potential to produce a very clean, high quality premium nickel concentrate.

In Australia, IMX operates and owns 51% of the Cairn Hill Mining Operation, located 55 kilometres south-east of Coober Pedy in South Australia, where it produces a premium coarse-grained magnetite-copper-gold DSO product at a rate of 1.8Mtpa.

IMX is actively developing the Mt Woods Magnetite Project on the highly prospective Mt Woods Inlier in South Australia. IMX currently has a JORC Inferred Resource of 569Mt @ 27% Fe at the Snaefell Magnetite Deposit and a Global Exploration Target of between 200-380Mt @ 25-35% Fe elsewhere in the project. Studies indicate that coarse grained concentrates that could be produced at Snaefell have the potential to produce a direct sinter feed product which has the potential to attract a significant price premium.

IMX has also entered into a joint venture with OZ Minerals (the Mt Woods Copper-Gold JV Project) to explore the Mt Woods tenements for copper and gold. OZ Minerals is spending a minimum of $20M for a 51% interest in the non-iron rights, with IMX retaining a 49% interest in the non-iron rights and 100% of the iron ore rights.

IMX owns 25.65% of Uranex (ASX:UNX), which is a dedicated uranium exploration company, which is developing the Mkuju Uranium project in southern Tanzania.

Visit: www.imxresources.com.au

FORWARD-LOOKING STATEMENTS: This News Release includes certain "forward-looking statements". Forward-looking statements and forward-looking information are frequently characterised by words such as "plan," "expect," "project," "intend," "believe," "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may", "will" or "could" occur. All statements other than statements of historical fact included in this release are forward-looking statements or constitute forward-looking information. There can be no assurance that such information of statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such information. Important factors could cause actual results to differ materially from IMX's expectations.

These forward-looking statements are based on certain assumptions, the opinions and estimates of management and qualified persons at the date the statements are made, and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking statements or information. These factors include the inherent risks involved in the exploration and development of mineral properties, the uncertainties involved in interpreting drilling results and other geological data, fluctuating metal prices, the possibility of project cost overruns or unanticipated costs and expenses, the ability of contracted parties (including laboratories and drill companies to provide services as contracted); uncertainties relating to the availability and costs of financing needed in the future and other factors. Mineral resources that are not mineral reserves do not have demonstrated economic viability. Exploration Target tonnage quantity and grades estimates are conceptual in nature only. These figures are not resource estimates as defined by the JORC (2004) or NI 43-101, as insufficient exploration has been conducted to define a mineral resource and it is uncertain if further exploration will result in the target being delineated as a mineral resource.

IMX undertakes no obligation to update forward-looking statements or information if circumstances should change. The reader is cautioned not to place undue reliance on forward-looking statements or information. Readers are also cautioned to review the risk factors identified by IMX in its regulatory filings made from time to time with the ASX, TSX and applicable Canadian securities regulators.

(1) ASX: 2 March 2012

ABN 67 009 129 560

The TSX does not accept responsibility for the adequacy or accuracy of this release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
The 3rd International Internet of @ThingsExpo, co-located with the 16th International Cloud Expo - to be held June 9-11, 2015, at the Javits Center in New York City, NY - announces that its Call for Papers is now open. The Internet of Things (IoT) is the biggest idea since the creation of the Worldwide Web more than 20 years ago.
"We help companies that are using a lot of Software as a Service. We help companies manage and gain visibility into what people are using inside the company and decide to secure them or use standards to lock down or to embrace the adoption of SaaS inside the company," explained Scott Kriz, Co-founder and CEO of Bitium, in this SYS-CON.tv interview at 15th Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
15th Cloud Expo, which took place Nov. 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA, expanded the conference content of @ThingsExpo, Big Data Expo, and DevOps Summit to include two developer events. IBM held a Bluemix Developer Playground on November 5 and ElasticBox held a Hackathon on November 6. Both events took place on the expo floor. The Bluemix Developer Playground, for developers of all levels, highlighted the ease of use of Bluemix, its services and functionalit...
The 4th International DevOps Summit, co-located with16th International Cloud Expo – being held June 9-11, 2015, at the Javits Center in New York City, NY – announces that its Call for Papers is now open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's large...
Some developers believe that monitoring is a function of the operations team. Some operations teams firmly believe that monitoring the systems they maintain is sufficient to run the business successfully. Most of them are wrong. The complexity of today's applications have gone far and beyond the capabilities of "traditional" system-level monitoring tools and approaches and requires much broader knowledge of business and applications as a whole. The goal of DevOps is to connect all aspects of app...
SAP is delivering break-through innovation combined with fantastic user experience powered by the market-leading in-memory technology, SAP HANA. In his General Session at 15th Cloud Expo, Thorsten Leiduck, VP ISVs & Digital Commerce, SAP, discussed how SAP and partners provide cloud and hybrid cloud solutions as well as real-time Big Data offerings that help companies of all sizes and industries run better. SAP launched an application challenge to award the most innovative SAP HANA and SAP HANA...
When an enterprise builds a hybrid IaaS cloud connecting its data center to one or more public clouds, security is often a major topic along with the other challenges involved. Security is closely intertwined with the networking choices made for the hybrid cloud. Traditional networking approaches for building a hybrid cloud try to kludge together the enterprise infrastructure with the public cloud. Consequently this approach requires risky, deep "surgery" including changes to firewalls, subnets...
Want to enable self-service provisioning of application environments in minutes that mirror production? Can you automatically provide rich data with code-level detail back to the developers when issues occur in production? In his session at DevOps Summit, David Tesar, Microsoft Technical Evangelist on Microsoft Azure and DevOps, will discuss how to accomplish this and more utilizing technologies such as Microsoft Azure, Visual Studio online, and Application Insights in this demo-heavy session.
DevOps is all about agility. However, you don't want to be on a high-speed bus to nowhere. The right DevOps approach controls velocity with a tight feedback loop that not only consists of operational data but also incorporates business context. With a business context in the decision making, the right business priorities are incorporated, which results in a higher value creation. In his session at DevOps Summit, Todd Rader, Solutions Architect at AppDynamics, discussed key monitoring techniques...
Cultural, regulatory, environmental, political and economic (CREPE) conditions over the past decade are creating cross-industry solution spaces that require processes and technologies from both the Internet of Things (IoT), and Data Management and Analytics (DMA). These solution spaces are evolving into Sensor Analytics Ecosystems (SAE) that represent significant new opportunities for organizations of all types. Public Utilities throughout the world, providing electricity, natural gas and water,...
The security devil is always in the details of the attack: the ones you've endured, the ones you prepare yourself to fend off, and the ones that, you fear, will catch you completely unaware and defenseless. The Internet of Things (IoT) is nothing if not an endless proliferation of details. It's the vision of a world in which continuous Internet connectivity and addressability is embedded into a growing range of human artifacts, into the natural world, and even into our smartphones, appliances, a...
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happe...
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series dat...
An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and asse...
The Internet of Things will greatly expand the opportunities for data collection and new business models driven off of that data. In her session at @ThingsExpo, Esmeralda Swartz, CMO of MetraTech, discussed how for this to be effective you not only need to have infrastructure and operational models capable of utilizing this new phenomenon, but increasingly service providers will need to convince a skeptical public to participate. Get ready to show them the money!