|By Marketwired .||
|November 8, 2012 07:18 PM EST||
CALGARY, ALBERTA -- (Marketwire) -- 11/09/12 -- Maxim Power Corp. (TSX:MXG) ("MAXIM" or the "Corporation") announced today the release of financial and operating results for its third quarter ended September 30, 2012. The unaudited financial statements, accompanying notes and Management Discussion and Analysis will be available on SEDAR and on MAXIM's website on November 9, 2012. All figures reported herein are Canadian dollars unless otherwise stated.
FINANCIAL HIGHLIGHTS Three Months Ended Nine Months Ended September 30, September 30, ($ in thousands except per share amounts) 2012 2011 2012 2011 Net revenue (1) $ 41,620 $ 37,593 $ 105,454 $ 110,474 Adjusted EBITDA (1) 16,612 13,690 25,259 27,523 Adjusted net income (1) 9,765 5,404 9,946 5,973 Net income 8,343 17,787 2,253 16,871 Per share - basic and diluted $ 0.15 $ 0.33 $ 0.04 $ 0.31 Funds from operations (2) 16,700 13,618 25,666 27,313 Per share - basic and diluted $ 0.31 $ 0.24 $ 0.47 $ 0.50 Electricity Deliveries (MWh) 354,976 335,268 834,992 907,808 Net Generation Capacity (MW) (3) 788 809 788 809 Average Alberta Power Prices ($ per MWh) $ 78.09 $ 94.69 $ 59.48 $ 76.26 Average Milner Realized Electricity Price ($ per MWh) $ 134.70 $ 95.41 $ 87.48 $ 76.91 (1) Select financial information was derived from the unaudited condensed consolidated interim financial statements and is prepared in accordance with Part 1 of the Canadian Institute of Chartered Accountants Handbook ("GAAP"), except net revenue, adjusted EBITDA, and adjusted net income. Net revenue is provided to highlight revenue net of any gains or losses realized on commodity swaps. Adjusted EBITDA is provided to assist management and investors in determining the Corporation's approximate operating cash flows before interest, income taxes, and depreciation and amortization and certain other income and expenses, and adjusted net income is used to compare MAXIM's results among reporting periods without consideration of unrealized gains and losses and to evaluate MAXIM's performance. Net revenue, adjusted EBITDA, and adjusted net income do not have any standardized meaning prescribed by GAAP and may not be comparable to similar measures presented by other companies. (2) Funds from operations is an Additional GAAP measure provided to assist management and investors in determining the Corporation's cash flows generated by operations before the cash impact of working capital fluctuations. (3) Generation capacity is manufacturer's nameplate capacity net of minority ownership interests of third parties.
Net revenue, adjusted EBITDA, and funds from operations increased in the third quarter of 2012 when compared to the third quarter of 2011. The increase in these financial measures is primarily due to higher generation and pricing at MAXIM's Pittsfield facility in the Northeast US as well as higher realized prices at Milner due to greater price volatility with Milner remaining predominantly unhedged to commodity prices in the third quarter of 2012.
Net income in the third quarter of 2012 was favourably affected by the aforementioned factors, partially offset by an unrealized (non-cash) loss on a derivative coal contract in 2012 as compared to an unrealized gain in 2011.
On a year to date basis, net revenue, adjusted EBITDA, net income and funds from operations have decreased from the prior year. The decrease in these financial measures is primarily due to a decline in Alberta power prices which had led to lower generation and impacted Milner results. Net income further decreased because of the previously mentioned unrealized loss on a derivative coal contract, which was partially offset by a gain from the sale of the APP facility.
AMENDMENT OF COAL CONTRACT
On November 8, 2012, the Corporation, through a subsidiary, amended one of its long-term coal supply agreements. The amended agreement will expire in 2015 and based on the current prices in the amended agreement, the purchase commitment remaining decreases by $20.1 million.
Deerland Peaking Station ("D1")
MAXIM is actively pursuing commercial arrangements that will allow for the construction of the 190 MW D1 Station to commence during 2013. MAXIM received regulatory approvals in 2008 to construct and operate D1. The D1 site is located near Bruderheim in Alberta's Industrial Heartland, and it is in close proximity to the entry point of the proposed Gateway pipeline and adjacent to the existing Deerland high voltage substation. This area is expected to experience significant growth in electrical demand. D1 is the only permitted peaking development project in the province of Alberta as at the date of this press release. This project is attractive due to an anticipated contraction of reliable base load supply in the Alberta power market. As such, MAXIM expects peaking requirements across Alberta to continue to grow to meet increasing demand and to provide firm backup for additional intermittent wind resources. During the second quarter of 2012, MAXIM entered into an agreement to secure firm natural gas transportation services for D1.
Summit Coal Limited Partnership ("SUMMIT") Mine 14 Project
SUMMIT is wholly owned by MAXIM and was formed in 2011 to advance the Mine 14 Project. SUMMIT has achieved certain key milestones essential to commencing commercial operations of Mine 14. In 2011, the ERCB granted the license to commence underground mining of the Mine 14 coal reserve. SUMMIT has firm terminal capacity and terminal processing services to enable the majority of Mine 14's proposed coal production to access the valuable seaborne coking coal market commencing January 1, 2015. SUMMIT has also secured firm 2013 delivery dates for critical mining equipment, including continuous miners and shuttle cars. The field work for the 2012 exploration program was recently completed and MAXIM anticipates providing an updated Technical Report during the first quarter of 2013, which will contribute to the advancement of a strategic review related to SUMMIT's Mine 14 project.
Milner Expansion ("M2")
The AUC has granted MAXIM approval to develop a 500 MW generating facility adjacent to the existing 150 MW generating facility ("M1"). A lengthy public consultation and regulatory process culminated in the project's final approval by the AUC on August 10, 2011. On September 12, 2012 the Government of Canada enacted new greenhouse gas legislation that limits the amount of carbon dioxide emitted by coal-fired generation facilities. MAXIM is examining ways to meet the new standards including development of a natural gas-fired facility. All aspects are presently being studied to determine the most viable and effective course of action.
Buffalo Atlee ("B1")
MAXIM acquired the B1 Power Project, situated near Brooks, Alberta, through an amalgamation with EarthFirst Canada Inc. This project has the potential for development of over 200 MW of wind generation capacity. Wind data has been collected on the site for approximately five years and supports project development based on higher power prices than those realized during recent months. MAXIM holds an exploratory Crown land permit with a term of five years, expiring on January 1, 2016. The addition of wind generation to MAXIM's existing portfolio of assets will diversify MAXIM's generation fuel types and provide the potential to offset the impact of the new greenhouse gas legislation.
MAXIM's results are significantly impacted by Alberta spot power prices. In preparing its guidance, management uses Alberta forward electricity prices as a proxy for Alberta spot electricity prices. The market for forward contracts is relatively illiquid and forward prices may not be a good predictor of settled prices as they may not factor in events such as unplanned outages that can cause a significant increase in settled power prices. Notwithstanding, MAXIM prepares its guidance using forward electricity price from independent sources.
MAXIM is updating guidance that was provided on August 9, 2012 as follows:
($ in thousands except per share amounts) ---------------------------------------------------------------------------- Guidance provided on Updated 2012 Select guidance KPI's August 9, 2012 Guidance ---------------------------------------------------------------------------- Adjusted EBITDA 34,300 37,200 Funds from operations 34,900 37,700 Funds from operations per share - basic and diluted ($ per share) 0.65 0.70 Adjusted net income 11,600 14,200 Adjusted net income per share - basic and diluted ($ per share) 0.21 0.26 Net income 6,100 8,000 Net income per share- basic and diluted ($ per share) 0.11 0.15 ----------------------------------------------------------------------------
MAXIM's revised 2012 guidance reflects an increase in all of its guidance KPI's. The increase is primarily due to improved performance at the Pittsfield facility during the third quarter as well as greater volatility in Alberta spot prices during the third quarter and beginning of the fourth quarter.
These projections are based on MAXIM`s existing portfolio of assets, do not include the impact of possible acquisitions or the commercialization of development initiatives, and are based on the following assumptions:
Guidance provided on Updated 2012 Guidance Assumptions August 9, 2012 Guidance ---------------------------------------------------------------------------- Electricity deliveries (MWh): HR Milner 722,227 645,550 Other facilities 532,942 557,898 ---------------------------------------------------------------------------- Total electricity deliveries 1,255,169 1,203,448 Net generation capacity at year end (MW) 796 796 Capital expenditures (excluding acquisitions): France repowering and peaking facilities 9,300 9,100 Development projects 12,500 8,900 Other assets 3,400 3,500 HR Milner 1,600 2,100 ---------------------------------------------------------------------------- Total capital expenditures 26,800 23,600 Average Alberta spot electricity price ($/MWh) 64.80 63.86 Average annual foreign exchange rates: C$/USD 1.00 1.00 C$/Euro 1.27 1.25 Weighted average shares outstanding - basic (000's) 54,084 54,084 Weighted average shares outstanding - diluted (000's) 54,086 54,085 ----------------------------------------------------------------------------
The decrease in Milner generation from 722,227 MWh per August 9, 2012 guidance to 645,550 MWh is a result of reduced generation during periods of lower power prices during the third quarter, which is expected to continue in the fourth quarter. This is partially offset by an increase in generation in the Northeast US during the third quarter, primarily due to transmission constraints and weather based demand at the Pittsfield facility.
Forecasted capital expenditures have decreased primarily to reflect a deferral in the construction timeline for Deerland from 2012 to 2013.
CONFERENCE CALL FOR 2012 THIRD QUARTER RESULTS
MAXIM will host a conference call for analysts and investors on Friday November 9, 2012 at 11:30 am MT. The call will be hosted by John Bobenic, MAXIM's President and Chief Executive Officer, and by Mike Mayder, Vice President, Finance and Chief Financial Officer. To participate in this conference call, please dial (866) 696-5910 or (416) 340-2217 in the Toronto area. It is recommended that participants call at least ten minutes prior to start time.
A recording of the conference call will be available from November 9, 2012 to November 16, 2012. To access the replay, dial (800) 408-3053 or (905) 694-9451 followed by the passcode 6805469. In addition, the recording will be available commencing November 9, 2012 in the Investor Relations section of MAXIM's website at www.maximpowercorp.com.
Based in Calgary, Alberta, MAXIM is an independent power producer, which acquires or develops, owns and operates innovative and environmentally responsible power and power related projects. MAXIM currently owns and operates 40 power plants in western Canada, the United States and France, having 788 MW of electric and 111 MW of thermal net generating capacity. MAXIM trades on the TSX under the symbol "MXG". For more information about MAXIM, visit our website at www.maximpowercorp.com.
Statements in this release which describe MAXIM's intentions, expectations or predictions, or which relate to matters that are not historical facts are forward-looking statements. These forward-looking statements involve known and unknown risks and uncertainties which may cause the actual results, performances or achievements of MAXIM to be materially different from any future results, performances or achievements expressed in or implied by such forward-looking statements. MAXIM may update or revise any forward- looking statements, whether as a result of new information, future events or changing market and business conditions and will update such forward-looking statements as required pursuant to applicable securities laws.
Maxim Power Corp.
John R. Bobenic
President and CEO
Maxim Power Corp.
Michael R. Mayder
Vice President, Finance and CFO
SOASTA, the leader in performance analytics, today reported record growth of the CloudTest community, exceeding 30,000 registered users of the CloudTest platform in Q1 2015. SOASTA also announced widespread adoption of its Web and mobile testing solutions, with more than 1,600 customers completing more than 285,000 tests using CloudTest during the quarter. This rapid growth shows that DevOps-driven digital businesses are embracing a more continuous approach to testing, and CloudTest is meeting t...
Apr. 18, 2015 08:00 AM EDT Reads: 947
SYS-CON Media announced today that Blue Box as launched a popular blog feed on Cloud Computing Journal. Cloud Computing Journal aims to help open the eyes of Enterprise IT professionals to the economics and strategies that utility/cloud computing provides. Blue Box Cloud gives you unequaled agility, without the burden of designing, deploying and managing your own infrastructure. It’s the right choice when public cloud just won’t do. Blue Box Cloud is a managed Private Cloud as a Service (...
Apr. 18, 2015 08:00 AM EDT Reads: 1,208
SYS-CON Events announced today that Ciqada will exhibit at SYS-CON's @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Ciqada™ makes it easy to connect your products to the Internet. By integrating key components - hardware, servers, dashboards, and mobile apps - into an easy-to-use, configurable system, your products can quickly and securely join the internet of things. With remote monitoring, control, and alert messaging capability, you will mee...
Apr. 18, 2015 07:00 AM EDT Reads: 1,498
SYS-CON Events announced today that GENBAND, a leading developer of real time communications software solutions, has been named “Silver Sponsor” of SYS-CON's WebRTC Summit, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. The GENBAND team will be on hand to demonstrate their newest product, Kandy. Kandy is a communications Platform-as-a-Service (PaaS) that enables companies to seamlessly integrate more human communications into their Web and mobile applicatio...
Apr. 18, 2015 06:00 AM EDT Reads: 2,195
SYS-CON Events announced today that BroadSoft, the leading global provider of Unified Communications and Collaboration (UCC) services to operators worldwide, has been named “Gold Sponsor” of SYS-CON's WebRTC Summit, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BroadSoft is the leading provider of software and services that enable mobile, fixed-line and cable service providers to offer Unified Communications over their Internet Protocol networks. The Compa...
Apr. 18, 2015 05:30 AM EDT Reads: 2,129
VoxImplant has announced full WebRTC support in the newest versions of its Android SDK and iOS SDK. The updated SDKs, which enable audio and video calls on mobile devices, are now compatible with the WebRTC standard to allow any mobile app to communicate with WebRTC-enabled browsers, including Google Chrome, Mozilla Firefox, Opera, and, when available, Microsoft Spartan. The WebRTC-updated SDKs represent VoxImplant's continued leadership in simplifying the development of real-time communication...
Apr. 18, 2015 02:45 AM EDT Reads: 1,774
Chef and Canonical announced a partnership to integrate and distribute Chef with Ubuntu. Canonical is integrating the Chef automation platform with Canonical's Machine-As-A-Service (MAAS), enabling users to automate the provisioning, configuration and deployment of bare metal compute resources in the data center. Canonical is packaging Chef 12 server in upcoming distributions of its Ubuntu open source operating system and will provide commercial support for Chef within its user base.
Apr. 18, 2015 01:45 AM EDT Reads: 1,701
The IoT Bootcamp is coming to Cloud Expo | @ThingsExpo on June 9-10 at the Javits Center in New York. Instructor. Registration is now available at http://iotbootcamp.sys-con.com/ Instructor Janakiram MSV previously taught the famously successful Multi-Cloud Bootcamp at Cloud Expo | @ThingsExpo in November in Santa Clara. Now he is expanding the focus to Janakiram is the founder and CTO of Get Cloud Ready Consulting, a niche Cloud Migration and Cloud Operations firm that recently got acquir...
Apr. 18, 2015 01:00 AM EDT Reads: 867
PubNub on Wednesday released an open source template to allow developers to add Skype-like video chat into their apps. The free template provides a fully functional video chat platform using WebRTC, PubNub and Google Authentication for a global, reliable collaboration solution. “While the WebRTC protocol has created huge excitement as a way to deliver video chat ubiquitously, there’s still a gap between the protocol itself and the ability to deploy a working, globally scaled, collaboration appl...
Apr. 18, 2015 01:00 AM EDT Reads: 7,360
Today, IT is not just a cost center. IT is an enabler and driver of business. With the emergence of the hybrid cloud paradigm, IT now has increasingly more capabilities to create new strategic opportunities for a business. Hybrid cloud allows an organization to utilize multi-tenant public clouds, dedicated private clouds, bare metal hosting, and the associated support and services for the right use cases through an on-demand, XaaS model. This model of IT creates tremendous opportunities for busi...
Apr. 18, 2015 12:00 AM EDT Reads: 3,810
ProfitBricks has launched its new DevOps Central and REST API, along with support for three multi-cloud libraries and a Python SDK. This, combined with its already existing SOAP API and its new RESTful API, moves ProfitBricks into a position to better serve the DevOps community and provide the ability to automate cloud infrastructure in a multi-cloud world. Following this momentum, ProfitBricks has also introduced several libraries that enable developers to use their favorite language to code ...
Apr. 17, 2015 06:00 PM EDT Reads: 1,236
SYS-CON Events announced today that Optimal Design, an Internet of Things solution provider, will exhibit at SYS-CON's Internet of @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Optimal Design is an award winning product development firm offering industrial design and engineering services to the consumer, medical, and defense markets.
Apr. 17, 2015 05:30 PM EDT Reads: 1,562
While DevOps most critically and famously fosters collaboration, communication, and integration through cultural change, culture is more of an output than an input. In order to actively drive cultural evolution, organizations must make substantial organizational and process changes, and adopt new technologies, to encourage a DevOps culture. Moderated by Andi Mann, panelists will discuss how to balance these three pillars of DevOps, where to focus attention (and resources), where organizations m...
Apr. 17, 2015 05:00 PM EDT Reads: 1,614
SYS-CON Events announced today that kintone has been named “Bronze Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY, and the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. kintone promotes cloud-based workgroup productivity, transparency and profitability with a seamless collaboration space, build your own business applic...
Apr. 17, 2015 04:45 PM EDT Reads: 1,449
SYS-CON Events announced today that Stratoscale, the new data center operating system, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Based in Herzeliya, Israel, Stratoscale is redefining the data center, developing a hardware-agnostic, software platform hyper-converging compute, storage and networking across the rack or data center. The self-optimizing platform automatically distributes all physical...
Apr. 17, 2015 04:45 PM EDT Reads: 1,538