|By PR Newswire||
|December 26, 2012 04:58 PM EST||
REDWOOD CITY, Calif., Dec. 26, 2012 /PRNewswire/ -- Cardica, Inc. (Nasdaq: CRDC) today announced that it shipped its first commercial MicroCutter XCHANGE™ 30 devices and cartridges to DACH Medical Group, its distributor for Germany, Austria and Switzerland. The MicroCutter XCHANGE 30 is the smallest commercially-available, cartridge-based cutting/stapling device designed to be used during laparoscopic and thoracoscopic surgical procedures.
The initial shipment of the XCHANGE 30 is intended to serve hospitals in Switzerland and Austria. Approximately 60 surgeons have used the XCHANGE 30 in over 220 laparoscopic and thoracoscopic procedures with more than 600 deployments over the last eight months. The MicroCutter XCHANGE 30 has been used in a wide variety of surgical procedures including appendectomies, gastric bypasses, hemicolectomies, gastrectomies, parenchymal or soft organ surgeries (operations on the liver and kidney), lobectomies, and other thoracic and lung surgeries. Recently, it has been used in hysterectomies as well.
Based on the performance of the MicroCutter XCHANGE 30 to date, Cardica believes the XCHANGE 30 is ready to be sold commercially. Cardica is initiating European commercial sales in a well-controlled, focused sales effort in parallel with data collection for a planned US regulatory submission. Cardica will continue to make enhancements and improvements to the MicroCutter XCHANGE 30 based on feedback from surgeons.
"Moving from development to commercialization of the XCHANGE 30 marks a significant accomplishment for Cardica, and the beginning of a new phase of growth. We continue to focus on ensuring each surgeon has positive and successful experiences with our device," said Bernard A. Hausen, M.D. Ph.D., president and chief executive officer of Cardica, Inc. "We believe the XCHANGE 30 provides a technology advancement over larger stapler sizes which have hindered further innovation in surgical procedures."
European Clinical Trial Update
In addition to beginning commercial efforts, Cardica will use the commercial version of the XCHANGE 30 in the remaining patients enrolled in its European clinical trial designed to support regulatory clearance of the XCHANGE 30 in the United States. To date 90 patients have been enrolled. The company expects enrollment to resume in January. Cardica has added two new sites for its clinical trial in order to complete enrollment of 160 patients in the first calendar quarter of 2013, as expected.
About the MicroCutter XCHANGE 30: The World's First and Only Five Millimeter Stapler
The MicroCutter XCHANGE 30 is a minimally-invasive stapling device designed to be used in laparoscopic and thoracoscopic surgical procedures. Its small, five-millimeter shaft diameter and range of motion up to 80 degrees of articulation differentiate the XCHANGE 30 from other commercially-available staplers. The device uses reloadable cartridges with a 30-millimeter staple line length. The cartridge comes with either blue staples, for medium tissue thicknesses, or white staples, for thin tissues such as vascular structures.
Laparoscopic procedures today are primarily performed through trocars ports, or small tubes inserted into incisions, that are between five and 10 millimeters in diameter. Prior to the introduction of the XCHANGE 30, to accommodate conventional stapling technology surgeons use 12 or 15 mm trocars, which can result in significant post-operative pain, port site infections or ventral hernias. The small size of the XCHANGE 30 may reduce the amount of tissue dissection necessary to position the stapler for deployment and may greatly improve access and visualization at the stapling site. The smaller diameter and much greater articulation, or range of motion, of the XCHANGE 30 are designed to allow easier access through smaller, less-invasive ports, and to enable faster and easier access to reach difficult anatomy during advanced laparoscopic procedures.
Cardica designs and manufactures proprietary stapling and anastomotic devices for cardiac and laparoscopic surgical procedures. Cardica's technology portfolio is intended to minimize operating time and enable minimally-invasive and robot-assisted surgeries. Cardica manufactures and markets its automated anastomosis systems, the C-Port® Distal Anastomosis Systems and PAS-Port® Proximal Anastomosis System for coronary artery bypass graft (CABG) surgery, and has shipped over 42,900 units throughout the world. In addition, Cardica is developing the Cardica MicroCutter XCHANGE™ 30, a cartridge-based microcutter device with a five-millimeter shaft diameter that is commercially available in the European Union, and the Cardica MicroCutter XPRESS™ 30, a true multi-fire laparoscopic stapling device. Both MicroCutter devices are designed to be used in a variety of procedures, including bariatric, colorectal, thoracic and general surgery. The Cardica MicroCutter XCHANGE 30 and XPRESS 30 products require 510(k) review and are not yet commercially available in the U.S.
The statements in this press release regarding the intended use of initial shipments of the XCHANGE 30, Cardica's belief that the XCHANGE 30 is ready to be sold commercially, that it is beginning of a new phase of growth, its intention to continue to make enhancements and improvements to the MicroCutter XCHANGE 30, its plans to add two new sites for its European clinical trial and commence enrollment in the clinical trial in January 2013 and complete enrollment in the first quarter of 2013, its intention to continue to be focused on ensuring each surgeon has a positive and successful experience with the device, and the benefits of the small size of the XCHANGE 30, are "forward-looking statements." The words "intend," "will," "believe," "may" and "plan" and derivations of these words are intended to identify these forward-looking statements. There are a number of important factors that could cause Cardica's results to differ materially from those indicated by these forward-looking statements, including that Cardica may not be successful in its efforts to further develop or commercialize the XCHANGE 30 or its planned MicroCutter product line on its anticipated timeframe, or at all, due to regulatory, technical, manufacturing or financial difficulties; that Cardica products may face development, regulatory, reimbursement and manufacturing risks; that Cardica's intellectual property rights may not provide adequate protection; and that general business and economic conditions may impair Cardica's ability to market and develop products, or raise additional funds needed to complete development, as well as other risks detailed from time to time in Cardica's reports filed with the U.S. Securities and Exchange Commission, including its Quarterly Report on Form 10-Q for the quarter ended September 30, 2012. Cardica expressly disclaims any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained herein. Investors are encouraged to read Cardica's reports filed with the U.S. Securities and Exchange Commission, available at www.sec.gov.
SOURCE Cardica, Inc.
The basic integration architecture, as defined by ESBs, hasn’t changed for more than a decade. Most cloud integration providers still rely on an ESB architecture and their proprietary connectors. As a result, enterprise integration projects suffer from constraints of availability and reliability of these connectors that are not re-usable across other integration vendors. However, the rapid adoption of APIs and almost ubiquitous availability of APIs amongst most SaaS and Cloud applications are ra...
Jun. 3, 2015 04:00 AM EDT Reads: 796
"We have developers who are really passionate about getting their code out to customers, no matter what, in the shortest possible time. Operations are very focused on procedures and policies," explained Stan Klimoff, CTO of Qubell, in this SYS-CON.tv interview at DevOps Summit, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 04:00 AM EDT Reads: 5,017
With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo in Silicon Valley. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be! Internet of @ThingsExpo, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 17th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading in...
Jun. 3, 2015 04:00 AM EDT Reads: 2,731
SYS-CON Events announced today that SUSE, a pioneer in open source software, will exhibit at SYS-CON's DevOps Summit 2015 New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. SUSE provides reliable, interoperable Linux, cloud infrastructure and storage solutions that give enterprises greater control and flexibility. More than 20 years of engineering excellence, exceptional service and an unrivaled partner ecosystem power the products and support that help ...
Jun. 3, 2015 04:00 AM EDT Reads: 1,261
DevOps Summit, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 17th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long developmen...
Jun. 3, 2015 03:15 AM EDT Reads: 2,428
“Will Jaya is a direct source for server integration and storage solutions. If you are looking for any specific configurations for a project we can help you configure based on your needs and requirements," explained Netty Goya, CEO of Will Jaya, in this SYS-CON.tv interview at 15th Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 03:15 AM EDT Reads: 3,580
"SendGrid sends about 15 billion emails a month and process all the events associated with that, about a trillion events a year," explained Aaron Beach, Senior Data Scientist at SendGrid, in this SYS-CON.tv interview at Cloud Expo, held Nov 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 03:00 AM EDT Reads: 835
Health care systems across the globe are under enormous strain, as facilities reach capacity and costs continue to rise. M2M and the Internet of Things have the potential to transform the industry through connected health solutions that can make care more efficient while reducing costs. In fact, Vodafone's annual M2M Barometer Report forecasts M2M applications rising to 57 percent in health care and life sciences by 2016. Lively is one of Vodafone's health care partners, whose solutions enable o...
Jun. 3, 2015 02:30 AM EDT Reads: 2,961
“Connect2Me is basically a game changer in the IoT industry. We have created IoT connecter middleware that can enable a connection to any kind of device," explained Yasser Khan, CTO of Connect2Me, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 02:15 AM EDT Reads: 3,124
"Application monitoring and intelligence can smooth the path in a DevOps environment. In a DevOps environment you see constant change. If you are trying to monitor things in a constantly changing environment, you're going to spend a lot of your job fixing your monitoring," explained Todd Rader, Solutions Architect at AppDynamics, in this SYS-CON.tv interview at DevOps Summit, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 02:00 AM EDT Reads: 4,622
17th Cloud Expo, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Meanwhile, 94% of enterprises a...
Jun. 3, 2015 01:15 AM EDT Reads: 2,418
"In our world there's a lot of cloud. Our focus is to help companies, who are bogged down by the enormousness of the cloud and infrastructure, to really go out there and monetize the cloud," explained Ian Khan, Global Strategic Positioning & Brand Manager at Solgenia, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 01:00 AM EDT Reads: 3,448
SYS-CON Events announced today that the "First Containers & Microservices Conference" will take place June 9-11, 2015, at the Javits Center in New York City. The “Second Containers & Microservices Conference” will take place November 3-5, 2015, at Santa Clara Convention Center, Santa Clara, CA. Containers and microservices have become topics of intense interest throughout the cloud developer and enterprise IT communities.
Jun. 3, 2015 12:15 AM EDT Reads: 2,201
“In the past year we've seen a lot of stabilization of WebRTC. You can now use it in production with a far greater degree of certainty. A lot of the real developments in the past year have been in things like the data channel, which will enable a whole new type of application," explained Peter Dunkley, Technical Director at Acision, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 12:15 AM EDT Reads: 5,703
"We help companies that are using a lot of Software as a Service. We help companies manage and gain visibility into what people are using inside the company and decide to secure them or use standards to lock down or to embrace the adoption of SaaS inside the company," explained Scott Kriz, Co-founder and CEO of Bitium, in this SYS-CON.tv interview at 15th Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 3, 2015 12:00 AM EDT Reads: 5,354