Click here to close now.

SYS-CON MEDIA Authors: Aria Blog, Pat Romanski, Elizabeth White, Peter Silva, Glenn Rossman

News Feed Item

Barrier Films for Flexible Electronics: Needs Players & Opportunities 2012-2022

NEW YORK, Dec. 31, 2012 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

Barrier Films for Flexible Electronics: Needs Players & Opportunities 2012-2022
http://www.reportlinker.com/p0191581/Barrier-Films-for-Flexible-Electronics-Needs-Players--Opportunities-2012-2022.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Glass_Manufacturing

Although it is possible to print many different kinds of electronic displays, in order for them to be commercially successful, they must be robust enough to survive for the necessary time and conditions required of the display. This condition has been a limitation of many printable electronic displays. Beyond printability and functionality, one of the most important requirements is encapsulation. Many of the materials used in printed electronic displays are chemically sensitive, and will react with many environmental components.

This highly targeted report from IDTechEx technology analyst Dr Harry Zervos gives an in-depth review of the issues, as well as forecasts for OLEDs and OPV, in order to understand the influence that the development of flexible barriers will have on the mass deployment and adoption of flexible electronics and photovoltaics.

A large opportunity lies in the development of devices in a flexible form factor, allowing them to be more robust, lightweight and versatile in their use.

However, many of the materials used in OLED displays and organic photovoltaics are sensitive to the environment, limiting their lifetime. These materials can be protected using substrates and barriers such as glass and metal, but this results in a rigid device and does not satisfy the applications demanding flexible devices. Plastic substrates and transparent flexible encapsulation barriers can be used, but these offer little protection to oxygen and water, resulting in the devices rapidly degrading.

In order to achieve device lifetimes of tens of thousands of hours, water vapor transmission rates (WVTR) must be 10-6 g/m2/day, and oxygen transmission rates (OTR) must be < 10-3 cm3/m2/day. For Organic Photovoltaics, the required WVTR is not as stringent as OLEDs require but is still very high at a level of 10-5 g/m2/day. These transmission rates are several orders of magnitude smaller than what is possible using any plastic substrate, and they can also be several orders of magnitude smaller than what can be measured using common equipment designed for this purpose. For these (and other) reasons, there has been intense interest in developing transparent barrier materials with much lower permeabilities.

This concise and unique report from IDTechEx gives an in-depth review of the needs, emerging solutions and players. It addresses specific topics such as:
- Companies which are active in the development of high barrier films and their achievements on the field to date.
- Surface smoothness and defects (such as cracks and pinholes) and the effect that these characteristics would have on the barrier behavior of the materials studied.
- Traditional methods of measurement of permeability are reaching the end of their abilities. The MOCON WVTR measurement device, which has been an industry standard, cannot give adequate measurements at the low levels of permeability required for Organic Photovoltaics and OLEDs. Other methods of measurement and equipment developed are being discussed.
- Forecasts for OLEDs and OPV, in order to understand the influence that the development of flexible barriers would have at the mass deployment and adoption of these technologies.

For those developing flexible electronics, seeking materials needs and opportunities, this is a must-read report.

1. SCOPE
2. INTRODUCTION TO ENCAPSULATION
3. SURFACE SMOOTHNESS - DEFECTS
3.1. Important considerations of surface smoothness
3.2. Micro Defects
3.2.1. Crystalline regions
3.2.2. Pinholes
3.2.3. Smoothness / Cracks-Scratches
3.2.4. Nanodefects
4. COMPANIES
4.1. 3M
4.2. Amcor Flexibles Singen GmbH
4.3. CPI
4.4. Fraunhofer - POLO Alliance
4.5. GE
4.6. Tera Barrier
4.7. Vitex
4.8. Other technologies - High barrier adhesives
4.9. Best performing barriers developed to date
5. BARRIER MEASUREMENTS
5.1. The Calcium test
5.2. MOCON
5.3. Illinois Instruments
5.4. Fluorescent Tracers
5.5. Black Spot Analysis
5.6. Tritium Test
5.7. CEA
5.8. 3M
5.9. IMRE
5.10. Mass Spectrocopy - gas permeation (WVTR & OTR potential applications)
6. FORECASTS FOR BARRIER FILMS FOR FLEXIBLE ELECTRONICS 2012-2022
6.1. The potential significance of organic and printed inorganic electronics
6.2. Forecasts for flexible electronics 2012-2022
6.3. Barrier films market size
7. CONCLUSIONS
8. REFERENCES
APPENDIX 1: ATOMIC LAYER DEPOSITION
APPENDIX 2: IDTECHEX PUBLICATIONS AND CONSULTANCY
TABLES
2.1. Water vapor and oxygen transmission rates of various materials
2.2. Requirements of barrier materials
3.1. Oxygen transmission rates of polypropylene with various coatings.4, 7
4.1. Overview of promising high barrier technologies
5.1. Lower detection limits of several barrier performance measurement techniques
6.1. Leading market drivers 2022
6.2. Total market value of flexible vs. rigid electronics 2012-2022
6.3. Barrier layer area forecasts 2012-2022 in square meters
6.4. Barrier layer market forecasts 2012-2022 in US$ billions
FIGURES
1.1. Examples of flexible OLED displays by SONY and AddVision
1.2. Flexible OLED fabricated using IMRE's high barrier substrate and encapsulation technique44
1.3. Flexible Solar Cell developed by Fraunhofer ISE
2.1. Schematic diagrams for encapsulated structures a) conventional b) laminated c) deposited in situ4
2.2. Scanning electron micrograph image of a barrier film cross section6
3.1. Visual defects of a selection of materials with barrier films highlighted through calcium corrosion test. Optical microscope magnification 10x.44
3.2. SEM pictures of the Atmospheric Plasma Glow Discharge deposited silica-like films on polymer substrates. Left: Film with embedded dust particles . Right: uniform film27
3.3. OTR as a function of defect density, the correlation between defect density and the oxygen transmission rate
3.4. SEM image of a pinhole defect formed from a dust particle32
3.5. Scanning electron microscope image of ITO coated on parylene/polymer film34
3.6. The measurement of OLED's lifetime of SiON/PC/ITO and SiON/parylene/PC/parylene/ITO substrate34
4.1. Calcium test results demonstrating superior WVTR performance
4.2. 3M barrier film development roadmap
4.3. Amcor (formerly Alcan) Packaging flexible barrier based on PET and SiOx47
4.4. DuPont Displays technology pipeline
4.5. Scanning electron micrograph of a thin hybrid polymer coating on SiOx deposited on a flexible PET film 46
4.6. OTR values achieved with different POLO multilayers46
4.7. Schematic of cross section of graded barrier coating and complete barrier film structure1.
4.8. Transparency of GE's UHB film versus wavelength
4.9. Examples of polymer multi-layer (PML) surface planarization a) OLED cathode separator structure b) high aspect ratio test structure.3, 8
4.10. Vitex multilayer deposition process8.
4.11. SEM cross section of Vitex Barix material with four dyads.
4.12. Optical transmission of Vitex Barix coating8.
4.13. Edge seal barrier formation by deposition through shadow masks10
4.14. Three dimensional barrier structure. Polymer is shown in red, and oxide (barrier) shown in blue10
4.15. Schematic of flexible OLED with hybrid encapsulation31
4.16. Corning flexible glass showcased at SID 2011
4.17. Matchless: AGC's ultra-thin sheet glass may be thin, but it can take the heat
4.18. AGC's ultra-thin sheet glass rolled into a coil
4.19. Area sealing55
4.20. DELO's light curing adhesive solution for electrophoretic displays55
4.21. Performance characteristics of DELO's light-curing materials55
4.22. Specifications on WVTR for different applications, as seen by Vitex Systems36
4.23. 3M specifications on WVTR and OTR for high barrier applications with stringent requirements 14
5.1. 2.25 mm2 area of a 50 nm layer of Ca deposited onto barrier coated PET viewed through the substrate. i. Image after 1632 h of exposure to atmosphere; ii. Image analysis whereby the grey scale of Ca degradation is processed to yiel
5.2. A simple set-up for measuring optical transmission of calcium test cells48
5.3. MOCON's Aquatran™ Model 138
5.4. MOCON's Aquatran™ schematic38
5.5. MOCON's OX-TRAN® Model 2/1039
5.6. Silica induced black spots, letters A & B mark black spots with a centralized black dot (silica particle)32
5.7. Black spot formation and growth mechanisms 32
5.8. General Atomics HTO WVTR testing apparatus40
6.1. Leading market drivers 2022
6.2. Total market value of flexible vs. rigid electronics 2012-2022
6.3. Barrier layer area forecasts 2012-2022 in square meters
6.4. Barrier layer market forecasts 2012-2022 in US$ billions
6.5. Size of opportunity
7.1. The iRex iLiad and the Amazon Kindle rigid e-book readers
7.2. E Ink flexible electrophoretic display and color electrophoretic display by SAMSUNG LCD, demonstrated at SID 2008
7.3. Lithium test sample with thin film encapsulation after 24 hrs in the damp heat test at 85°C/85% relative humidity. B. Similar lithium test sample after 200 hrs in the same damp heat test with optimized barrier structure. [42]


To order this report:
Glass_Manufacturing Industry:
Barrier Films for Flexible Electronics: Needs Players & Opportunities 2012-2022

__________________________
Contact Nicolas: [email protected]
US: (805)-652-2626
Intl: +1 805-652-2626

SOURCE Reportlinker

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
CodeFutures has announced Dan Lynn as its new CEO. Lynn assumes the role from Founder Cory Isaacson, who has joined RMS and will now serve as chairman of CodeFutures. Lynn brings more than 14 years of advanced technology and business success experience, and will help CodeFutures build on its industry leadership around its Agile Big Data initiatives. His technical expertise will be invaluable in advancing CodeFutures’ AgilData platform and new processes for streamlining and gaining value from gro...
Wearable devices have come of age. The primary applications of wearables so far have been "the Quantified Self" or the tracking of one's fitness and health status. We propose the evolution of wearables into social and emotional communication devices. Our BE(tm) sensor uses light to visualize the skin conductance response. Our sensors are very inexpensive and can be massively distributed to audiences or groups of any size, in order to gauge reactions to performances, video, or any kind of present...
The speed of software changes in growing and large scale rapid-paced DevOps environments presents a challenge for continuous testing. Many organizations struggle to get this right. Practices that work for small scale continuous testing may not be sufficient as the requirements grow. In his session at DevOps Summit, Marc Hornbeek, Sr. Solutions Architect of DevOps continuous test solutions at Spirent Communications, will explain the best practices of continuous testing at high scale, which is r...
The explosion of connected devices / sensors is creating an ever-expanding set of new and valuable data. In parallel the emerging capability of Big Data technologies to store, access, analyze, and react to this data is producing changes in business models under the umbrella of the Internet of Things (IoT). In particular within the Insurance industry, IoT appears positioned to enable deep changes by altering relationships between insurers, distributors, and the insured. In his session at @Things...
The Internet of Everything (IoE) brings together people, process, data and things to make networked connections more relevant and valuable than ever before – transforming information into knowledge and knowledge into wisdom. IoE creates new capabilities, richer experiences, and unprecedented opportunities to improve business and government operations, decision making and mission support capabilities. In his session at @ThingsExpo, Gary Hall, Chief Technology Officer, Federal Defense at Cisco S...
SYS-CON Events announced today that Vitria Technology, Inc. will exhibit at SYS-CON’s @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Vitria will showcase the company’s new IoT Analytics Platform through live demonstrations at booth #330. Vitria’s IoT Analytics Platform, fully integrated and powered by an operational intelligence engine, enables customers to rapidly build and operationalize advanced analytics to deliver timely business outcomes ...
DevOps is about increasing efficiency, but nothing is more inefficient than building the same application twice. However, this is a routine occurrence with enterprise applications that need both a rich desktop web interface and strong mobile support. With recent technological advances from Isomorphic Software and others, it is now feasible to create a rich desktop and tuned mobile experience with a single codebase, without compromising performance or usability.
“We just completed the roll out of our first public and private cloud offerings, which are a combination of public, hybrid, and private cloud,” stated Erik Levitt, CEO of Open Data Centers, in this SYS-CON.tv interview at the 14th International Cloud Expo®, held June 10-12, 2014, at the Javits Center in New York City. Cloud Expo® 2014 Silicon Valley, November 4–6, at the Santa Clara Convention Center in Santa Clara, CA, will feature technical sessions from a rock star conference faculty and the...
The Internet of Things (IoT) is causing data centers to become radically decentralized and atomized within a new paradigm known as “fog computing.” To support IoT applications, such as connected cars and smart grids, data centers' core functions will be decentralized out to the network's edges and endpoints (aka “fogs”). As this trend takes hold, Big Data analytics platforms will focus on high-volume log analysis (aka “logs”) and rely heavily on cognitive-computing algorithms (aka “cogs”) to mak...
SYS-CON Events announced today that GENBAND, a leading developer of real time communications software solutions, has been named “Silver Sponsor” of SYS-CON's WebRTC Summit, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. The GENBAND team will be on hand to demonstrate their newest product, Kandy. Kandy is a communications Platform-as-a-Service (PaaS) that enables companies to seamlessly integrate more human communications into their Web and mobile applicatio...
VictorOps is making on-call suck less with the only collaborative alert management platform on the market. With easy on-call scheduling management, a real-time incident timeline that gives you contextual relevance around your alerts and powerful reporting features that make post-mortems more effective, VictorOps helps your IT/DevOps team solve problems faster.
Skeuomorphism usually means retaining existing design cues in something new that doesn’t actually need them. However, the concept of skeuomorphism can be thought of as relating more broadly to applying existing patterns to new technologies that, in fact, cry out for new approaches. In his session at DevOps Summit, Gordon Haff, Senior Cloud Strategy Marketing and Evangelism Manager at Red Hat, will discuss why containers should be paired with new architectural practices such as microservices ra...
Companies today struggle to manage the types and volume of data their customers and employees generate and use every day. With billions of requests daily, operational consistency can be elusive. In his session at Big Data Expo, Dave McCrory, CTO at Basho Technologies, will explore how a distributed systems solution, such as NoSQL, can give organizations the consistency and availability necessary to succeed with on-demand data, offering high availability at massive scale.
From telemedicine to smart cars, digital homes and industrial monitoring, the explosive growth of IoT has created exciting new business opportunities for real time calls and messaging. In his session at @ThingsExpo, Ivelin Ivanov, CEO and Co-Founder of Telestax, shared some of the new revenue sources that IoT created for Restcomm – the open source telephony platform from Telestax. Ivelin Ivanov is a technology entrepreneur who founded Mobicents, an Open Source VoIP Platform, to help create, de...
The industrial software market has treated data with the mentality of “collect everything now, worry about how to use it later.” We now find ourselves buried in data, with the pervasive connectivity of the (Industrial) Internet of Things only piling on more numbers. There’s too much data and not enough information. In his session at @ThingsExpo, Bob Gates, Global Marketing Director, GE’s Intelligent Platforms business, to discuss how realizing the power of IoT, software developers are now focu...