|By JCN Newswire||
|September 4, 2013 10:58 PM EDT||
Tokyo, Sept 5, 2013 - (JCN Newswire) - Fujitsu today announced the development of a new technology for simulating magnetization reversal(1), and has used the K computer(2) to perform huge calculations to successfully conduct the world's first simulation of the magnetization-reversal process in a permanent magnet. This opens up new possibilities in the manufacture of electric motors, generators and other devices without relying on heavy rare earth elements(3).
The process of magnetization reversal has been a subject of scientific study, but the huge volume of calculations required to accurately model magnetic materials has made it difficult to simulate that process.
Fujitsu developed a magnetic simulation technology that combines a finite-element method(4) with micromagnetics(5). This technology makes it possible to compute magnetization processes of magnetic materials with complex microstructures on a nanometer (nm) scale, which is many times smaller than conventional technology can manage, by executing enormous computations on a supercomputer using a massively parallel computing technique.
This combination technology paves the way toward R&D advances in new magnetic materials, including strong magnets free from heavy rare earth elements.
Simulations of magnetization reversal in rare-earth magnets using this technology were performed on the K computer(6) in cooperation with Japan's National Institute for Materials Science (NIMS). On September 5, the results of this simulation are being presented jointly by Fujitsu and NIMS at the 37th Annual Conference on Magnetics in Japan being held at Hokkaido University.
Efforts to improve the efficiency of electric motors, generators, and other devices that use magnets are gaining increasing interest. Hybrid vehicles and electric vehicles both use rare-earth magnets containing heavy rare earth elements in their motors, but there is a growing tendency to avoid the usage of these elements due to resource concerns. This is why it is so important to develop powerful magnets using new materials and to understand magnetic-domain structures(7) as a stepping stone toward the development of new magnetic materials.
About the Simulation
This newly developed technology will be used to simulate the magnetization reversal of rare-earth magnets. Using a polycrystalline model of a rare-earth magnet, the model is divided into extremely small regions of 1 nm. In so doing, it is possible to calculate the behavior of magnetic transition regions called domain walls. This simulation can also analyze the movement of domain walls and the propagation of magnetization reversals, which is difficult to perform with other simulation technologies.
In collaboration with the Elements Strategy Initiative Center for Magnetic Materials (ESICMM) at NIMS (supported by the Japanese Ministry of Education, Culture, Sports, Science, and Technology's "elements strategy project"), Fujitsu will perform ultra-large-scale computations on the K computer and develop a "multi-scale magnetic simulator" that brings micromagnetics together with material design based on first-principle electronic structure calculations(8).
Glossary and Notes
(1) Magnetization reversal:The reversal of magnetization caused by magnetic fields or electrical currents.
(2) K computer:A supercomputer jointly developed by RIKEN and Fujitsu.
(3) Heavy rare earth elements:Includes extremely scarce rare earth elements such as dysprosium. Reducing usage levels is a critical issue.
(4) Finite-element method:A method of numerical analysis. Widely used in structural analysis and magnetic-field analysis.
(5) Micromagnetics:A method of analyzing the fine structure of a magnetic material. In a computer simulation, if the magnetic material is divided into regions the size of a few atoms, the computing time is enormous.6 Simulations performed on the K computer:Simulations performed on the K computer Performed as a general-purpose simulation, grant number hp12008
(6) (principal investigator: Yoshihiro Gohda, The University of Tokyo).
(7) Magnetic-domain structure:In order to reduce magnetic energies in the interior of a magnetic material, it is divided into minute regions called magnetic domains. The boundary region between magnetic domains is called a domain wall.
(8) First-principle electronic structure calculations:A method of calculating characteristics of substances on an atomic level based on quantum mechanics (first principles).
About Fujitsu Limited
Fujitsu is the leading Japanese information and communication technology (ICT) company offering a full range of technology products, solutions and services. Approximately 170,000 Fujitsu people support customers in more than 100 countries. We use our experience and the power of ICT to shape the future of society with our customers. Fujitsu Limited (TSE: 6702) reported consolidated revenues of 4.4 trillion yen (US$47 billion) for the fiscal year ended March 31, 2013 For more information, please see www.fujitsu.com.
Source: Fujitsu Limited
Fujitsu Limited Public and Investor Relations www.fujitsu.com/global/news/contacts/ +81-3-3215-5259
Copyright 2013 JCN Newswire. All rights reserved. www.japancorp.net