SYS-CON MEDIA Authors: Liz McMillan, Yeshim Deniz, Zakia Bouachraoui, Elizabeth White, Pat Romanski

Blog Feed Post

Part II: EMC announces XtremIO General Availability, speeds and feeds

Part II: EMC announces XtremIO General Availability, speeds and feeds

By Greg Schulz

Storage I/O trends

XtremIO flash SSD more than storage I/O speed

Following up part I of this two-part series, here are more more details, insights and perspectives about EMC XtremIO and it’s generally availability that were announced today.

XtremIO the basics

  • All flash Solid State Device (SSD) based solution
  • Cluster of up to four X-Brick nodes today
  • X-Bricks available in 10TB increments today, 20TB in January 2014
  • 25 eMLC SSD drives per X-Brick with redundant dual processor controllers
  • Provides server-side iSCSI and Fibre Channel block attachment
  • Integrated data footprint reduction (DFR) including global dedupe and thin provisioning
  • Designed for extending duty cycle, minimizing wear of SSD
  • Removes need for dedicated hot spare drives
  • Capable of sustained performance and availability with multiple drive failure
  • Only unique data blocks are saved, others tracked via in-memory meta data pointers
  • Reduces overhead of data protection vs. traditional small RAID 5 or RAID 6 configurations
  • Eliminates overhead of back-end functions performance impact on applications
  • Deterministic  storage I/O performance (IOPs, latency, bandwidth) over life of system

When would you use XtremIO vs. another storage system?

If you need all enterprise like data services including thin provisioning, dedupe, resiliency with deterministic performance on an all-flash system with raw capacity from 10-40TB (today) then XtremIO could be a good fit. On the other hand, if you need a mix of SSD based storage I/O performance (IOPS, latency or bandwidth) along with some HDD based space capacity, then a hybrid or traditional storage system could be the solution. Then there are hybrid scenarios where a hybrid storage system, array or appliance (mix of SSD and HDD) are used for most of the applications and data, with an XtremIO handling more tasks that are demanding.

How does XtremIO compare to others?

EMC with XtremIO is taking a different approach than some of their competitors whose model is to compare their faster flash-based solutions vs. traditional mid-market and enterprise arrays, appliances or storage systems on a storage I/O IOP performance basis. With XtremIO there is improved performance measured in IOPs or database transactions among other metrics that matter. However there is also an emphasis on consistent, predictable, quality of service (QoS) or what is known as deterministic storage I/O performance basis. This means both higher IOPs with lower latency while doing normal workload along with background data services (snapshots, data footprint reduction, etc).

Some of the competitors focus on how many IOPs or work they can do, however without context or showing impact to applications when back-ground tasks or other data services are in use. Other differences include how cluster nodes are interconnected (for scale out solutions) such as use of Ethernet and IP-based networks vs dedicated InfiniBand or PCIe fabrics. Host server attachment will also differ as some are only iSCSI or Fibre Channel block, or NAS file, or give a mix of different protocols and interfaces.

An industry trend however is to expand beyond the flash SSD need for speed focus by adding context along with QoS, deterministic behavior and addition of data services including snapshots, local and remote replication, multi-tenancy, metering and metrics, security among other items.

Storage I/O trends

Who or what are XtremIO competition?

To some degree vendors who only have PCIe flash SSD cards might place themselves as the alternative to all SSD or hybrid mixed SSD and HDD based solutions. FusionIO used to take that approach until they acquired NexGen (a storage system) and now have taken a broader more solution balanced approach of use the applicable tool for the task or application at hand.

Other competitors include the all SSD based storage arrays, systems or appliance vendors which includes legacy existing as well as startups vendors that include among others IBM who bought TMS (flashsystems), NetApp (EF540), Solidfire, Pure, Violin (who did a recent IPO) and Whiptail (bought by Cisco).  Then there are the hybrid which is a long list including Cloudbyte (software), Dell, EMCs other products, HDS, HP, IBM, NetApp, Nexenta (Software), Nimble, Nutanix, Oracle, Simplivity and Tintri among others.

What's new with this XtremIO announcement

10TB X-Bricks enable 10 to 40TB (physical space capacity) per cluster (available on 11/19/13). 20TB X-Bricks (larger capacity drives) will double the space capacity in January 2014. If you are doing the math, that means either a single brick (dual controller) system, or up to four bricks (nodes, each with dual controllers) configurations. Common across all system configurations are data features such as thin provisioning, inline data footprint reduction (e.g. dedupe) and XtremIO Data Protection (XDP).

What does XtremIO look like?

XtremIO consists of up to four nodes (today) based on what EMC calls X-Bricks.
EMC XtremIO X-Brick
25 SSD drive X-Brick

Each 4U X-Brick has 25 eMLC SSD drives in a standard EMC 2U DAE (disk enclosure) like those used with the VNX and VMAX for SSD and Hard Disk Drives (HDD). In addition to the 2U drive shelve, there are a pair of 1U storage processors (e.g. controllers) that give redundancy and shared access to the storage shelve.

XtremIO Architecture
XtremIO X-Brick block diagram

XtremIO storage processors (controllers) and drive shelve block diagram. Each X-Brick and their storage processors or controllers communicate with each other and other X-Bricks via a dedicated InfiniBand using Remote Direct Memory Access (RDMA) fabric for memory to memory data transfers. The controllers or storage processors (two per X-Brick) each have dual processors with eight cores for compute, along with 256GB of DRAM memory. Part of each controllers DRAM memory is set aside as a mirror its partner or peer and vise versa with access being over the InfiniBand fabric.

XtremIO fabric
XtremIO X-Brick four node fabric cluster or instance

How XtremIO works

Servers access XtremIO X-Bricks using iSCSI and Fibre Channel for block access. A responding X-Brick node handles the storage I/O request and in the case of a write updates other nodes. In the case of a write, the handling node or controller (aka storage processor) checks its meta data map in memory to see if the data is new and unique. If so, the data gets saved to SSD along with meta data information updated across all nodes. Note that data gets ingested and chunked or sharded into 4KB blocks. So for example if a 32KB storage I/O request from the server arrives, that is broken (e.g. chunk or shard) into 8 4KB pieces each with a mathematical unique fingerprint created. This fingerprint is compared to what is known in the in memory meta data tables (this is a hexadecimal number compare so a quick operation). Based on the comparisons if unique the data is saved and pointers created, if already exists, then pointers are updated.

In addition to determining if unique data, the fingerprint is also used for generate a balanced data dispersal plan across the nodes and SSD devices. Thus there is the benefit of reducing duplicate data during ingestion, while also reducing back-end IOs within the XtremIO storage system. Another byproduct is the reduction in time spent on garbage collection or other background tasks commonly associated with SSD and other storage systems.

Meta data is kept in memory with a persistent copied written to reserved area on the flash SSD drives (think of as a vault area) to support and keep system state and consistency. In between data consistency points the meta data is kept in a log journal like how a database handles log writes. What's different from a typical database is that XtremIO XIOS platform software does these consistency point writes for persistence on a granularity of seconds vs. hours or minutes.

Storage I/O trends

What about rumor that XtremIO can only do 4KB IOPs?

Does this mean that the smallest storage I/O or IOP that XtremIO can do is 4GB?

That is a rumor or some fud I have heard floated by a competitor (or two or three) that assumes if only 4KB internal chunk or shard being used for processing, that must mean no IOPs smaller than 4KB from a server.

XtremIO can do storage I/O IOP sizes of 512 bytes (e.g. the standard block size) as do other systems. Note that the standard server storage I/O block or IO size is 512 bytes or multiples of that unless the new 4KB advanced format (AF) block size being used which based on my conversations with EMC, AF is not supported, yet. Also keep in mind that since XtremIO XIOS internally is working with 4KB chunks or shards, that is a stepping stone for being able to eventually leverage back-end AF drive support in the future should EMC decide to do so.

What else is EMC doing with XtremIO?

  • VCE Vblock XtremIO systems for SAP HANA (and other databases) in memory databases along with VDI optimized solutions.
  • VPLEX and XtremIO for extended distance local, metro and wide area HA, BC and DR.
  • EMC PowerPath XtremIO storage I/O path optimization and resiliency.
  • Secure Remote Support (aka phone home) and auto support integration.

Boosting your available software license minutes (ASLM) with SSD

Another use of SSD has been in the past the opportunity to make better use of servers stretching their usefulness or delaying purchase of new ones by improving their effective use to do more work. In the past this technique of using SSDs to delay a server or CPU upgrade was used when systems when hardware was more expensive, or during the dot com bubble to fill surge demand gaps.  This has the added benefit of stretching database and other expensive software licenses to go further or do more work. The less time servers spend waiting for IOP's means more time for doing useful work and bringing value of the software license. Otoh, the more time spent waiting is lot available software minutes which is cost overhead.

Think of available software licence minutes (ASLM) in terms of available software license minutes where if doing useful work your software is providing value. On the other hand if those minutes are not used for useful work (e.g. spent waiting or lost due to CPU or server or IO wait, then they are lost). This is similar to airlines and available seat miles (ASM) metric where if left empty it’s a lost opportunity, however if used, then value, not to mention if yield management applied to price that seat differently. To make up for that loss many organizations have to add extra servers and thus more software licensing costs.

Storage I/O trends

Can we get a side of context with them metrics?

EMC along with some other vendors are starting to give more context with their storage I/O performance metrics that matter than simple IOP's or Hero Marketing Metrics. However context extends beyond performance to also availability and space capacity which means data protection overhead. As an example, EMC claims 25% for RAID 5 and 20% for RAID 6 or 30% for RAID 5/RAID 6 combo where a 25 drive (SSD) XDP has a 8% overhead. However this assumes a 4+1 (5 drive) RAID , not apples to apples comparison on a space overhead basis. For example a 25 drive RAID 5 (24+1) would have around an 4% parity protection space overhead or a RAID 6 (23+2) about 8%.

Granted while the space protection overhead might be more apples to apples with the earlier examples to XDP, there are other differences. For example solutions such as XDP can be more tolerant to multiple drive failures with faster rebuilds than some of the standard or basic RAID implementations. Thus more context and clarity would be helpful.

StorageIO would like see vendors including EMC along with startups who give data protection space overhead comparisons without context to do so (and applaud those who provide context). This means providing the context for data protection space overhead comparisons similar to performance metrics that matter. For example simply state with an asterisk or footnote comparing a 4+1 RAID 5 vs. a 25 drive erasure or forward error correction or dispersal or XDP or wide stripe RAID for that matter (e.g. can we get a side of context). Note this is in no way unique to EMC and in fact quite common with many of the smaller startups as well as established vendors.

General comments

My laundry list of items which for now would be nice to have's, however for you might be need to have would include native replication (today leverages Recover Point), Advanced Format (4KB) support for servers, as well as SSD based drives, DIF (Data Integrity Feature), and Microsoft ODX among others. While 12Gb SAS server to X-Brick attachment for small in the cabinet connectivity might be nice for some, more practical on a go forward basis would be 40GbE support.

Now let us see what EMC does with XtremIO and how it competes in the market. One indicator to watch in the industry and market of the impact or presence of EMC XtremIO is the amount of fud and mud that will be tossed around. Perhaps time to make a big bowl of popcorn, sit back and enjoy the show…

Ok, nuff said (for now).

Cheers
Gs

Greg Schulz - Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)

All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2013 StorageIO All Rights Reserved

Read the original blog entry...

More Stories By Greg Schulz

Greg Schulz is founder of the Server and StorageIO (StorageIO) Group, an IT industry analyst and consultancy firm. Greg has worked with various server operating systems along with storage and networking software tools, hardware and services. Greg has worked as a programmer, systems administrator, disaster recovery consultant, and storage and capacity planner for various IT organizations. He has worked for various vendors before joining an industry analyst firm and later forming StorageIO.

In addition to his analyst and consulting research duties, Schulz has published over a thousand articles, tips, reports and white papers and is a sought after popular speaker at events around the world. Greg is also author of the books Resilient Storage Network (Elsevier) and The Green and Virtual Data Center (CRC). His blog is at www.storageioblog.com and he can also be found on twitter @storageio.

Latest Stories
The Transparent Cloud-computing Consortium (T-Cloud) is a neutral organization for researching new computing models and business opportunities in IoT era. In his session, Ikuo Nakagawa, Co-Founder and Board Member at Transparent Cloud Computing Consortium, will introduce the big change toward the "connected-economy" in the digital age. He'll introduce and describe some leading-edge business cases from his original points of view, and discuss models & strategies in the connected-economy. Nowad...
For far too long technology teams have lived in siloes. Not only physical siloes, but cultural siloes pushed by competing objectives. This includes informational siloes where business users require one set of data and tech teams require different data. DevOps intends to bridge these gaps to make tech driven operations more aligned and efficient.
All in Mobile is a mobile app agency that helps enterprise companies and next generation startups build the future of digital. We offer mobile development and design for smartphones, tablets and wearables. Our projects cover the latest and most innovative technologies - voice assistants, AI, AR/VR and more. We excel at solutions for sports, fintech and retail industries.
NanoVMs is the only production ready unikernel infrastructure solution on the market today. Unikernels prevent server intrusions by isolating applications to one virtual machine with no users, no shells and no way to run other programs on them. Unikernels run faster and are lighter than even docker containers.
The dream is universal: heuristic driven, global business operations without interruption so that nobody has to wake up at 4am to solve a problem. Building upon Nutanix Acropolis software defined storage, virtualization, and networking platform, Mark will demonstrate business lifecycle automation with freedom of choice and consumption models. Hybrid cloud applications and operations are controllable by the Nutanix Prism control plane with Calm automation, which can weave together the following: ...
CloudEXPO | DevOpsSUMMIT | DXWorldEXPO Silicon Valley 2019 will cover all of these tools, with the most comprehensive program and with 222 rockstar speakers throughout our industry presenting 22 Keynotes and General Sessions, 250 Breakout Sessions along 10 Tracks, as well as our signature Power Panels. Our Expo Floor will bring together the leading global 200 companies throughout the world of Cloud Computing, DevOps, IoT, Smart Cities, FinTech, Digital Transformation, and all they entail. As ...
Darktrace is the world's leading AI company for cyber security. Created by mathematicians from the University of Cambridge, Darktrace's Enterprise Immune System is the first non-consumer application of machine learning to work at scale, across all network types, from physical, virtualized, and cloud, through to IoT and industrial control systems. Installed as a self-configuring cyber defense platform, Darktrace continuously learns what is ‘normal' for all devices and users, updating its understa...
Digital Transformation (DX) is a major focus with the introduction of DXWorldEXPO within the program. Successful transformation requires a laser focus on being data-driven and on using all the tools available that enable transformation if they plan to survive over the long term. A total of 88% of Fortune 500 companies from a generation ago are now out of business. Only 12% still survive. Similar percentages are found throughout enterprises of all sizes. We are offering early bird savings...
Crosscode Panoptics Automated Enterprise Architecture Software. Application Discovery and Dependency Mapping. Automatically generate a powerful enterprise-wide map of your organization's IT assets down to the code level. Enterprise Impact Assessment. Automatically analyze the impact, to every asset in the enterprise down to the code level. Automated IT Governance Software. Create rules and alerts based on code level insights, including security issues, to automate governance. Enterpr...
Your job is mostly boring. Many of the IT operations tasks you perform on a day-to-day basis are repetitive and dull. Utilizing automation can improve your work life, automating away the drudgery and embracing the passion for technology that got you started in the first place. In this presentation, I'll talk about what automation is, and how to approach implementing it in the context of IT Operations. Ned will discuss keys to success in the long term and include practical real-world examples. Ge...
The benefits of automated cloud deployments for speed, reliability and security are undeniable. The cornerstone of this approach, immutable deployment, promotes the idea of continuously rolling safe, stable images instead of trying to keep up with managing a fixed pool of virtual or physical machines. In this talk, we'll explore the immutable infrastructure pattern and how to use continuous deployment and continuous integration (CI/CD) process to build and manage server images for any platfo...
DevOpsSUMMIT at CloudEXPO, to be held June 25-26, 2019 at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's largest enterprises – and delivering real results. Am...
Hackers took three days to identify and exploit a known vulnerability in Equifax’s web applications. I will share new data that reveals why three days (at most) is the new normal for DevSecOps teams to move new business /security requirements from design into production. This session aims to enlighten DevOps teams, security and development professionals by sharing results from the 4th annual State of the Software Supply Chain Report -- a blend of public and proprietary data with expert researc...
Automation is turning manual or repetitive IT tasks into a thing of the past-including in the datacenter. Nutanix not only provides a world-class user interface, but also a comprehensive set of APIs to allow the automation of provisioning, data collection, and other tasks. In this session, you'll explore Nutanix APIs-from provisioning to other Day 0, Day 1 operations. Come learn about how you can easily leverage Nutanix APIs for orchestration and automation of infrastructure, VMs, networking, an...
Dynatrace is an application performance management software company with products for the information technology departments and digital business owners of medium and large businesses. Building the Future of Monitoring with Artificial Intelligence. Today we can collect lots and lots of performance data. We build beautiful dashboards and even have fancy query languages to access and transform the data. Still performance data is a secret language only a couple of people understand. The more busine...