|By Marketwired .||
|January 20, 2014 12:43 PM EST||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 01/20/14 -- Cornerstone Metals Inc. (TSX VENTURE: CCC) ("Cornerstone" or the "Company") reports that, as a result of a review by the British Columbia Securities Commission (the "BCSC"), the Company is issuing the following news release to clarify certain technical disclosure.
Certain of the Company's disclosure contained in its Corporate Presentation and as posted on the Company's website included certain disclosures non-compliant with National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101"). The Company has now taken the following actions to clarify these non-compliant disclosures:
-- The Company has shut down its website and is in the process of amending the website relating to the Company's disclosure -- The Company's website previously contained non-compliant disclosure which has been retracted and deleted, the specifics of which are set out below. The non-compliant disclosure should not be relied upon. -- In those instances where the Company has clarified or revised previous disclosure, the Company advises readers not to rely on such previous statements as they may continue to be found in the public domain.
Non-Compliant Exploration Targets
Lone Mountain Project, New Mexico
On the Company's website project disclosure for its Lone Mountain project and on slides 9 and 21 of its Corporate Presentation dated December 9, 2013, the Company has disclosed an exploration target for the Lone Mountain property, which is restricted by NI 43-101 section 2.3(1)(a) because it does not include the information and cautionary language required by section 2.3(2) of NI 43-101.
Accordingly, investors are cautioned that the exploration target at the Company's Lone Mountain project in New Mexico is conceptual in nature. The Potential Estimate for the leachable copper zone at Lone Mountain has a range between 110 and 160 million tonnes at between 0.20% and 0.29% copper. The estimate was based on all drill data (43 holes, 100-250m spacing), modeled in 3D for the near surface leachable copper zone and applied simple weighted averages of assays within modeled solids. The quoted figures are reported as an exploration target. The potential quantities and grades are conceptual in nature. There has been insufficient exploration to define a mineral resource and it is uncertain if further exploration will result in the target being delineated as a mineral resource. The Company has updated its website material and its Corporate Presentation to include this information and cautionary language required by NI 43-101.
Twin Peaks Project, Arizona
On slide 9 of the Company's December 9, 2013 Corporate Presentation, the Company has disclosed an "exploration target" for the Twin Peaks property, which is restricted by NI 43-101 section 2.3(1)(a) because it does not include the information and cautionary language required by section 2.3 (2) of NI 43-101. The Company was in error and has deleted references to the exploration potential for the Twin Peaks property from its Corporate Presentation. The Company does not have an "exploration target" on Twin Peaks as defined by NI 43-101. Readers should not rely on the retracted statement because there is inadequate drilling and drill density at this time.
Selective Disclosure of Highest Values
On slides 9 and 16 of its December 9, 2013 Corporate Presentation, the Company disclosed previous exploration results for its Mimbres Project in New Mexico, by reporting only the highest or best values and used an "up to" basis for reporting values. This type of disclosure is not balanced or complete and may be misleading if high values are from selected samples or outliers. The Company has updated its Corporate Presentation to disclose a range of all available exploration results "from 15.2m @ 0.4% Cu to 43m @1% Cu" for the Mimbres Project.
On the Company's Website, December 9, 2013 Corporation Presentation, and Corporate Overview, the Company did not identify and disclose the relationship to the Company of the qualified person who prepared or supervised the preparation of, or approved of the technical information disclosed, as required by NI 43-101 Section 3.1.
All technical disclosure information included in such disclosures was prepared under the supervision of Paul Cowley, P.Geo., President and CEO of the Company, a qualified person consistent with NI 43-101. The Company has updated its Website and Corporation Presentation. The downloadable Corporate Overview has been removed in its entirety from the Company's website.
On Behalf of Cornerstone Metals Inc.
Paul Cowley, President and CEO
Paul Cowley, P. Geo., President & CEO of the Company, is the Qualified Person under NI 43-101 who has reviewed and approved the technical content of this news release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.