|By Marketwired .||
|January 20, 2014 01:00 PM EST||
TORONTO, ONTARIO -- (Marketwired) -- 01/20/14 -- Alder Resources Ltd.'s ("Alder" or the "Company") (TSX VENTURE: ALR) news release is being revised to include required cautionary statements. Alder's work over the past few months has targeted a tailings tonnage of between 1.75 and 2.25 million tonnes grading from 0.14 to 0.30% Cu, 0.52 to 0.57 g/t Au and 6.37 to 12.55 g/t Ag (see figure and table). The target target is the result of 99, up to 6 metre deep, augur holes, with most holes penetrating to the base of the tailings. The average grade of these intercepts is 0.21% Cu, 0.55 g/t Au and 9.37 g/t Ag over an average width of 5.4 metres. Within this block, Alder is targeting a higher grade sub-block containing between 400,000 to 500,000 tonnes grading from 0.38 to 0.41 % Cu, 0.70 to 1.00 g/t Au and 6.37 to 10.65 g/t Ag.
---------------------------------------------------------------------------- Target Tonnes Target Cu Target Au Target Ag CuEq(i) Tailing (Mt) (%) (g/t) (g/t) (%) ---------------------------------------------------------------------------- Area A 1.75 - 2.25 0.14-0.30 0.52-0.57 6.37-12.55 0.53-0.80 ---------------------------------------------------------------------------- Sub-area 0.4-0.5 0.38-0.41 0.70-1.00 6.37-10.65 0.88-1.14 ---------------------------------------------------------------------------- (i) As per previous news releases - CuEq = Cu% + Au g/t x (0.6033) + Ag g/t x (0.012) and US$2.90/lb Cu, US$1200/oz Au and US$24/oz Ag
In addition to the area that Alder sampled in detail, 66 additional auger holes, spaced approximately 100 metres apart (see figure), covering an area of 0.45 hectares, and having an average thickness of 2.76 metres, returned average grades of 0.16% Cu, 0.21 g/t Au and 5.56 g/t Ag. Sampling completed to date does not encompass the entire tailings area.
Metallurgical work is still required to determine how much of the metal in the tailings can be recovered and if the recovery methods are economically feasible.
The potential quantity and grade of the tailings material is conceptual in nature, there has been insufficient exploration to define a mineral resource in respect of the tailings and it is uncertain if further exploration will result in the target being delineated as a mineral resource.
Don Dudek, President and CEO, is quoted: "The addition of a well defined tailings target with compelling grades further supports Alder's plan to complete the metallurgical studies required so that a business case for the project can be developed. This project is more advanced than most in that there is a large mineral resource already stockpiled on surface."
Alder is currently reviewing financing alternatives to fund the metallurgical and additional studies that are required, including the sale of a royalty on the property.
In summary, the Rosita property is well endowed and Alder management strongly believe that the existing stockpile resource and historic near surface mineral resources are sufficient to justify defining the metallurgical characteristics of the stockpiles. In addition, there are numerous exploration targets that could add significant value to the project. The results of metallurgical studies of the stockpiles are expected to define a probable processing path, likely processing costs and which exploration targets to prioritize. Assuming a cost effective process for extracting the metals is defined, a preliminary economic assessment would be the subsequent step.
Quality Assurance/Quality Control
Auger tailings samples were collected into heavy gauge plastic bags, sealed on-site, then stored at Alder's Rosita field office until transported by company or laboratory personnel to Inspectorate Exploration and Mining Services' sample preparation facility in Managua. In Managua, pulps were prepared for shipping to Inspectorate's Analytical laboratory in Reno, Nevada, where each sample was analyzed via one assay-tonne fire assay for gold and 30 element ICP (Inductively Coupled Plasma-atomic emission spectrometry) methods for copper, silver and 28 other elements.
Alder has implemented an industry standard Quality Assurance/Quality Control program that includes the insertion of certified standards and blanks into the sample stream. Standards for the exploration program were prepared by WCM Minerals of Burnaby, B.C. Based on the types of mineralization identified in the region and the anticipated grades, four standards were selected for the program, including CU157, CU159, CU164 and CU186. The recommended Cu-Au-Ag-Mo values for the four geochemical standards are shown in Table 4 below. Blanks were prepared from a felsic tuff unit (the Quaternary Las Sierras Formation) which crops out at Tipitapa, east of Managua. Apparently several other mining companies have used this material in the past, and shown it to be void of Au-Ag mineralization, although our own analyses indicate that it frequently returns anomalous Cu values in the 100 to 300 ppm range. The QA/QC program was more rigorous for the tailings sampling program consequently, only these results are discussed below. In addition to Alder's QA/QC program, Inspectorate has established an internal control system that includes the insertion of standards every 30 samples; however, these have not been evaluated.
The sampling program was carried out under the supervision of Joe Arengi, M.Sc, P.Geo, Alder's past President and CEO and a qualified person as defined by NI 43-101. Don Dudek, P. Geo., Alder's President and CEO and a qualified person as defined by NI 43-101, has reviewed and approved the scientific and technical content of this news release.
About Alder Resources Ltd.
Alder is a resource company focused on the development of gold and base metal projects throughout the Americas. Alder's current high priority Cu-Au-Ag porphyry target is the Rosita project in Nicaragua located 275 kilometres northeast of Managua. The company has current Inferred mineral stock pile resources of 7.95 million tonnes grading 0.62% Cu, 0.46 g/t Au and 9.21 g/t Ag with numerous zones that have good near term potential to add to and enhance these resources. See the technical report entitled "Rosita Cu-Au-Ag Project, RAAN, Nicaragua, NI 43-101 Technical Report on Mineral Resource Estimate of Rosita Stockpiles" effective as of May 8, 2012, which is available under the Company's profile at www.sedar.com.
In August 2011, Alder entered into an option agreement to acquire a 65% interest in the Rosita D concession from Calibre Mining Corp. by issuing 1,000,000 shares and incurring expenditures of $4,000,000 over four years. To date Alder has incurred approximately $3.1 million of the $4.0 million obligation and has until October 2015 to incur the remaining project expenditures.
For additional information, please visit our website at www.alderresources.ca and follow us on Facebook, Linked in and Twitter: @AlderResources.
Cautionary Note Regarding Forward-looking Information
This press release contains "forward-looking information" within the meaning of applicable Canadian securities legislation. Forward-looking information includes, without limitation, statements regarding the Company's mineral resource estimate, potential mineralization, future plans and the exploration target. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Alder to be materially different from those expressed or implied by such forward-looking information, including but not limited to: general business, economic, competitive, geopolitical and social uncertainties; the actual results of current exploration activities; risks associated with operations in foreign jurisdictions; ability to successfully integrate the purchased properties; and other risks inherent in the mining industry. Although Alder has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information. Alder does not undertake to update any forward-looking information, except in accordance with applicable securities laws.
NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
To view the figure associated with this press release, please visit the following link: http://media3.marketwire.com/docs/923012a.pdf.
The 5th International DevOps Summit, co-located with 17th International Cloud Expo – being held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the...
Jun. 1, 2015 10:15 PM EDT Reads: 4,203
"We are the top stocking distributor for HP renew products in North America. We can only sell to U.S. authorized partners and resellers for HP," explained Miguel Diazdelcastillo Jr., Sales Executive at Creative Business Solutions, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 1, 2015 10:00 PM EDT Reads: 3,578
Growth hacking is common for startups to make unheard-of progress in building their business. Career Hacks can help Geek Girls and those who support them (yes, that's you too, Dad!) to excel in this typically male-dominated world. Get ready to learn the facts: Is there a bias against women in the tech / developer communities? Why are women 50% of the workforce, but hold only 24% of the STEM or IT positions? Some beginnings of what to do about it!
Jun. 1, 2015 09:45 PM EDT Reads: 597
SYS-CON Events announced today that BMC will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BMC delivers software solutions that help IT transform digital enterprises for the ultimate competitive business advantage. BMC has worked with thousands of leading companies to create and deliver powerful IT management services. From mainframe to cloud to mobile, BMC pairs high-speed digital innovation with robust...
Jun. 1, 2015 09:30 PM EDT Reads: 1,298
“Will Jaya is a direct source for server integration and storage solutions. If you are looking for any specific configurations for a project we can help you configure based on your needs and requirements," explained Netty Goya, CEO of Will Jaya, in this SYS-CON.tv interview at 15th Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 1, 2015 09:15 PM EDT Reads: 3,375
There is little doubt that Big Data solutions will have an increasing role in the Enterprise IT mainstream over time. 8th International Big Data Expo, co-located with 17th International Cloud Expo - to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA - has announced its Call for Papers is open. As advanced data storage, access and analytics technologies aimed at handling high-volume and/or fast moving data all move center stage, aided by the cloud computing bo...
Jun. 1, 2015 09:15 PM EDT Reads: 1,594
SYS-CON Events announced today that the "First Containers & Microservices Conference" will take place June 9-11, 2015, at the Javits Center in New York City. The “Second Containers & Microservices Conference” will take place November 3-5, 2015, at Santa Clara Convention Center, Santa Clara, CA. Containers and microservices have become topics of intense interest throughout the cloud developer and enterprise IT communities.
Jun. 1, 2015 09:15 PM EDT Reads: 550
"SendGrid sends about 15 billion emails a month and process all the events associated with that, about a trillion events a year," explained Aaron Beach, Senior Data Scientist at SendGrid, in this SYS-CON.tv interview at Cloud Expo, held Nov 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 1, 2015 09:00 PM EDT Reads: 507
“DevOps is really about the business. The business is under pressure today, competitively in the marketplace to respond to the expectations of the customer. The business is driving IT and the problem is that IT isn't responding fast enough," explained Mark Levy, Senior Product Marketing Manager at Serena Software, in this SYS-CON.tv interview at DevOps Summit, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 1, 2015 08:15 PM EDT Reads: 4,012
SYS-CON Events announced today that SUSE, a pioneer in open source software, will exhibit at SYS-CON's DevOps Summit 2015 New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. SUSE provides reliable, interoperable Linux, cloud infrastructure and storage solutions that give enterprises greater control and flexibility. More than 20 years of engineering excellence, exceptional service and an unrivaled partner ecosystem power the products and support that help ...
Jun. 1, 2015 08:15 PM EDT Reads: 1,052
"ElasticBox is an enterprise company that makes it very easy for developers and IT ops to collaborate to develop, build and deploy applications on any cloud - private, public or hybrid," stated Monish Sharma, VP of Customer Success at ElasticBox, in this SYS-CON.tv interview at DevOps Summit, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 1, 2015 08:00 PM EDT Reads: 4,503
ThingsExpo New York is offering a limited time FREE "Expo Plus" registration option in New York. On site registration price of $1,95 will be set to 'free' for delegates who register during special offer. To take advantage of this opportunity, attendees can use the coupon code, and secure their registration to attend all keynotes, ThingsExpo sessions, expo floor, and SYS-CON.tv power panels. Special FREE registration givess access to all DevOps, Containers and Microservices sessions as well. Regi...
Jun. 1, 2015 08:00 PM EDT Reads: 693
The only place to be Nov 3-5 is Cloud Expo | @ThingsExpo | DevOps Summit 2015 West at the Santa Clara Convention Center in Santa Clara, CA. Join us there as delegates from all over the world come to listen to and engage with speakers & sponsors from the leading Cloud Computing, IoT, Big Data and DevOps companies. Cloud Expo & @ThingsExpo are the leading events covering the booming market of Cloud Computing, IoT & Big Data for the enterprise. Speakers from all over the world will be hand-picked...
Jun. 1, 2015 07:30 PM EDT Reads: 1,683
The 17th International Cloud Expo has announced that its Call for Papers is open. 17th International Cloud Expo, to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, APM, APIs, Microservices, Security, Big Data, Internet of Things, DevOps and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding bu...
Jun. 1, 2015 07:30 PM EDT Reads: 4,322
The 4th International Internet of @ThingsExpo, co-located with the 17th International Cloud Expo - to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA - announces that its Call for Papers is open. The Internet of Things (IoT) is the biggest idea since the creation of the Worldwide Web more than 20 years ago.
Jun. 1, 2015 07:30 PM EDT Reads: 1,924