SYS-CON MEDIA Authors: Xenia von Wedel, Peter Silva, Glenn Rossman, Ava Smith, Elizabeth White

News Feed Item

Mawson West Limited: Kapulo Project Mineral Resource Update

Highlights:

PERTH, AUSTRALIA -- (Marketwired) -- 01/22/14 -- Mawson West Limited (TSX: MWE) ("Mawson West" or "the Company") is pleased to provide updated estimates of the Mineral Resources at the Company's Kapulo copper project in the Democratic Republic of Congo ("DRC").

Mawson West Chief Executive Bruce McFadzean said:

"The 2011 Kapulo feasibility study relied upon Mineral Reserves from the Shaba deposit only; the Safari North and Safari South deposits required further drilling at that time. Infill drilling has now enabled us to upgrade the confidence categories of Mineral Resource estimates at all the Kapulo deposits. We look forward to completing an economic analysis and reporting Mineral Reserves late this quarter."

Overview

Kapulo comprises three outcropping copper deposits, Shaba, Safari North and Safari South (Figure 1). The deposits feature high-grade hydrothermal copper mineralisation associated with the Kapulo Fault.

Drilling programs completed in 2013 were designed to upgrade the confidence categories of resource estimates at all three deposits and obtain core samples for further metallurgical test work, particularly at Safari North. The improved knowledge will, after economic analysis, permit a more robust estimate of Mineral Reserves at Shaba deposit and maiden estimates of Mineral Reserves at Safari. The 2013 programs to early November totalled 9,044 metres in reverse circulation (RC) holes and 7,486 metres in 58 diamond core holes (including 2,019 metres in RC pre-collars).

The additional assay data now available, along with updated geological interpretations, have been utilized by Perth-based MPR Geological Consultants Pty Ltd to generate updated resource models for all three deposits. The resulting Mineral Resources are reported after applying depth and cut-off grade constraints that the Company considers comply with the "reasonable prospect of economic extraction" test required by National Instrument 43-101.

Applying 0.7% Cu cut-off grade, resources that have potential for extraction by open pit mining in the three deposits total:


--  4.96 Million tonnes @ 3.16% Cu for 157,000 tonnes contained copper in
    Measured Resources;
--  1.27 Million tonnes @ 2.48% Cu for 31,500 tonnes contained copper in
    Indicated Resources;
--  Total 6.23 Million tonnes @ 3.02% Cu for 188,000 tonnes contained copper
    in Measured and Indicated Resources, and
--  2.87 Million tonnes @ 2.0% Cu for 56,000t contained Cu in Inferred
    Resources.

Table 1 summarises the updated Mineral Resource estimates.

Relative to previous estimates, the new resource models more reliably delineate and estimate high grade zones in each of the deposits. The updated resource models will form the basis for new Mineral Reserve estimates, mining schedules and financial modelling to be undertaken in Q1 2014.

Each of the deposits remains open down-plunge and future exploration efforts will be directed toward drill testing depth extensions and evaluating other targets along strike on the Kapulo Fault.

Table 1: Kapulo Project Mineral Resources


----------------------------------------------------------------------------
Deposit             Cut Off         Measured               Indicated
                   ---------------------------------------------------------

                       Cu %      Kt    Cu %   Cu Kt      Kt    Cu %   Cu Kt
----------------------------------------------------------------------------
Shaba greater than      0.7   3,500    3.52     123     700    2.80    19.6
 900mRL
Safari North greater    0.7   1,060    2.55    27.0     358    2.38     8.5
 than 1000mRL
Safari South            0.7     396    1.61     6.4     214    1.59     3.4
----------------------------------------------------------------------------
Total                         4,956    3.16     157   1,272    2.48    31.5
----------------------------------------------------------------------------

------------------------------------------------------------------
Deposit                   Meas + Ind               Inferred
                   -----------------------------------------------

                        Kt    Cu %   Cu Kt      Kt    Cu %   Cu Kt
------------------------------------------------------------------
Shaba greater than   4,200    3.40     143   1,200     2.1      25
 900mRL
Safari North greater 1,418    2.51    35.6   1,300     2.0      26
 than 1000mRL
Safari South           610    1.60     9.8     370     1.4     5.2
------------------------------------------------------------------
Total                6,228    3.02     188   2,870     2.0      56
------------------------------------------------------------------

Notes: Rounding of figures to appropriate precisions has resulted in apparent inconsistencies. Contained copper metal is quoted in-situ. Kt = thousand tonnes.

Figure 1: Kapulo project location and proposed infrastructure - http://media3.marketwire.com/docs/Fig10121.pdf.

Shaba Deposit

Shaba is a tabular deposit extending over a strike length of 460 metres and dipping westerly at approximately 60 degrees (Figure 2). Mineralisation averages 30 metres true width, reaching up to 65 metres true width, and plunges to the south in the plane of the lode. The deposit contains a distinct, high-grade hangingwall zone with copper grades commonly exceeding six per cent that offers potential to accelerate metal production in the early years of mine life.

Drilling has tested Shaba to a maximum depth of about 350 metres below surface where mineralisation remains open down-plunge. Preliminary pit optimisations indicate that resources above approximately 270 metres depth (900mRL) have potential for economic extraction and the economic cut-off grade is likely to be in the range 0.5-1.0% Cu.

Shaba estimated resources are listed in Table 2 and Figure 3 shows a long-section view of the resource block model.

Table 2: Shaba Estimated Resources, above 900mRL


----------------------------------------------------------------------------
Cut Off
Cu%                        Measured                     Indicated

                       Kt       Cu%     Cu kt        Kt       Cu%     Cu kt
----------------------------------------------------------------------------
0.5                 4,100      3.09       127       885      2.34      20.7
0.6                 3,780      3.31       125       780      2.59      20.2
----------------------------------------------------------------------------
0.7                 3,500      3.52       123       700      2.80      19.6
----------------------------------------------------------------------------
0.8                 3,270      3.72       122       636      3.01      19.1
0.9                 3,050      3.92       120       568      3.27      18.6
1.0                 2,860      4.12       118       512      3.53      18.1
----------------------------------------------------------------------------

--------------------------------------------------------------------------
Cut Off
Cu%                       Meas+Ind                      Inferred

                      Kt       Cu%     Cu kt        Kt       Cu%     Cu kt
--------------------------------------------------------------------------
0.5                4,985      2.96       147     1,800       1.6        29
0.6                4,560      3.19       145     1,500       1.9        29
--------------------------------------------------------------------------
0.7                4,200      3.40       143     1,200       2.1        25
--------------------------------------------------------------------------
0.8                3,906      3.60       141     1,000       2.4        24
0.9                3,618      3.82       138       900       2.6        23
1.0                3,372      4.03       136       830       2.7        22
--------------------------------------------------------------------------

Notes: Rounding of figures to appropriate precisions has resulted in apparent inconsistencies. Contained copper metal is quoted in-situ. Kt = thousand tonnes.

Figure 2: Drill cross-section through Shaba deposit - http://media3.marketwire.com/docs/Fig20121.pdf.

Figure 3: Shaba deposit long-section looking west, shown as a 2-dimensional representation of the resource block model with blocks coloured by accumulated copper tonnes in blocks grading 0.7% Cu or greater - http://media3.marketwire.com/docs/Fig30121.pdf.

Safari North Deposit

Drilling has now confirmed that mineralisation is continuous between Safari North and South deposits but Safari North can be distinguished as hosting higher tenor grades and has been drilled to greater depth. The two deposits have been treated separately for the purposes of resource estimation.

The Safari North deposit extends over 430 metres strike length, with mineralisation ranging between 10 and 45 metres true width and dipping at 50 degrees to the west (Figure 4). A high-grade and thicker core to the lode plunges to the south. Drill coverage extends to a maximum 180 metres below surface and mineralisation remains open at that depth. Preliminary pit optimisations indicate that resources above approximately 200 metres depth (1000mRL) have potential for economic extraction and the economic cut-off grade is likely to be in the range of 0.5-1.0% Cu.

Safari North estimated resources are listed in Table 3 and Figure 5 shows a long-section view of the resource model.

Table 3: Safari North Estimated Resources, above 1000mRL


----------------------------------------------------------------------------
Cut Off
Cu %                       Measured                     Indicated

                       Kt      Cu %     Cu kt        Kt      Cu %     Cu kt
----------------------------------------------------------------------------
0.5                 1,220      2.29      27.9       429      2.09       9.0
0.6                 1,140      2.41      27.5       395      2.22       8.8
----------------------------------------------------------------------------
0.7                 1,060      2.55      27.0       358      2.38       8.5
----------------------------------------------------------------------------
0.8                   991      2.67      26.5       327      2.54       8.3
0.9                   935      2.78      26.0       302      2.68       8.1
1.0                   886      2.88      25.5       289      2.76       8.0
----------------------------------------------------------------------------

--------------------------------------------------------------------------
Cut Off
Cu %                     Meas + Ind                     Inferred

                      Kt      Cu %     Cu kt        Kt      Cu %     Cu kt
--------------------------------------------------------------------------
0.5                1,649      2.24      36.9     1,700       1.7        29
0.6                1,535      2.36      36.2     1,500       1.9        29
--------------------------------------------------------------------------
0.7                1,418      2.51      35.6     1,300       2.0        26
--------------------------------------------------------------------------
0.8                1,318      2.64      34.8     1,200       2.2        26
0.9                1,237      2.76      34.1     1,100       2.3        25
1.0                1,175      2.85      33.5     1,100       2.4        26
--------------------------------------------------------------------------

Notes: Rounding of figures to appropriate precisions has resulted in apparent inconsistencies. Contained copper metal is quoted in-situ. Kt = thousand tonnes.

Figure 4: Drill cross-section through Safari North deposit - http://media3.marketwire.com/docs/Fig40121.pdf.

Figure 5: Safari North deposit long-section looking west, shown as a 2-dimensional representation of the resource block model with blocks coloured by accumulated copper tonnes in blocks grading 0.7% Cu or greater - http://media3.marketwire.com/docs/Fig50121.pdf.

Safari South Deposit

Safari South mineralisation extends over 460 metres strike length with true widths up to 45 metres and averaging 23 metres. It is a tabular deposit of generally lower tenor than Safari North, although drill coverage generally extends to only about 65 metres vertical depth at present. Figure 6 shows a cross-section through Safari South and Figure 7 shows a long-section view of the resource model. With the model extending to a maximum depth of only about 70 metres vertical depth (1120mRL) it is considered that the entire resource may potentially be economically extractable and thus no depth constraint has been applied.

Table 4: Safari South Estimated Resources


----------------------------------------------------------------------------
Cut Off
Cu%                        Measured                     Indicated

                       Kt      Cu %     Cu kt        Kt      Cu %     Cu kt
----------------------------------------------------------------------------
0.5                   509      1.38       7.0       281      1.36       3.8
0.6                   454      1.48       6.7       248      1.46       3.6
----------------------------------------------------------------------------
0.7                   396      1.61       6.4       214      1.59       3.4
----------------------------------------------------------------------------
0.8                   354      1.71       6.1       182      1.74       3.2
0.9                   320      1.80       5.8       163      1.85       3.0
1.0                   289      1.89       5.5       149      1.93       2.9
----------------------------------------------------------------------------

--------------------------------------------------------------------------
Cut Off
Cu%                      Meas + Ind                     Inferred

                      Kt      Cu %     Cu kt        Kt      Cu %     Cu kt
--------------------------------------------------------------------------
0.5                  790      1.37      10.8       540       1.1       5.9
0.6                  702      1.47      10.3       460       1.2       5.5
--------------------------------------------------------------------------
0.7                  610      1.60       9.8       370       1.4       5.2
--------------------------------------------------------------------------
0.8                  536       172       9.2       320       1.5       4.8
0.9                  483      1.82       8.8       260       1.6       4.2
1.0                  438      1.90       8.3       220       1.7       3.7
--------------------------------------------------------------------------

Notes: Rounding of figures to appropriate precisions has resulted in apparent inconsistencies. Contained copper metal is quoted in-situ. Kt = thousand tonnes.

Figure 6: Drill cross-section through Safari South deposit - http://media3.marketwire.com/docs/Fig60121.pdf.

Figure 7: Safari South deposit long-section looking west, shown as a 2-dimensional representation of the resource block model with blocks coloured by accumulated copper tonnes in blocks grading 0.7% Cu or greater - http://media3.marketwire.com/docs/Fig70121.pdf.

Comparisons to Previous Estimates

Previous Mineral Resource estimates by Coffey Mining Ltd in June 2011 are tabulated in Appendix A.

The updated Mineral Resources reported in this release are not directly comparable with previous estimates because they cover different geographic extents. They are informed by an additional 16,530 metres of combined RC and diamond core drilling and have been reported using modified depth constraints and cut-off grades that, in the Company's view, reflect reasonable economic constraints.

Previous resource estimates have included estimated silver grades. Samples from Mawson's 2013 drilling were assayed at SGS's Dikulushi laboratory using a technique with a lower detection limit for silver of 5ppm. Whilst adequate for the much higher silver grades encountered at Dikulushi, the precision of those assays is not sufficient to permit reliable estimates of the lower silver grades in the Kapulo deposits. The updated Mineral Resource estimate at Kapulo therefore does not include silver content.

Resource Estimate Technical Notes:

For each deposit:


--  Reliability of assay data was checked by examining assays of reference
    materials, blanks and duplicate samples and records of sample
    recoveries;
--  Drill hole location and survey data were checked for spatial integrity;
--  Drill hole assay data were composited to uniform one metre down-hole
    lengths;
--  Assay composites were domained using wireframes of mineralisation
    capturing zones of continuous mineralisation grading greater than
    nominally 0.2% Cu, guided by geological logging;
--  Assay composites were also domained using triangulated surfaces
    representing weathering boundaries;
--  Univariate statistics of copper grade populations in each of the
    (sub)domains were examined and top cuts selected to limit the influence
    of extreme grades;
--  Copper grades were estimated for blocks with dimensions 10mN x 5mE x
    5mRL using Ordinary Kriging with only assay composites of the
    mineralised domains informing the estimates;
--  Block grade estimates were checked against informing data for global and
    conditional bias and for spatial correlation;
--  Bulk densities derived by water immersion method of drill core were
    examined for each of the weathering domains and linearly correlated with
    copper grades to derive grade-density functions. Those functions were
    used to estimate bulk densities applied to each of the model blocks;
--  At 0.7% Cu cut-off, densities average 2.54 t/bcm for the combined
    Measured and Indicated resources and 2.53 t/bcm for the Inferred
    resources;
--  Block factors, reflecting the proportion of each block lying inside the
    constraining mineralisation wireframe and below the surveyed topographic
    surface, were applied to calculate tonnage estimates;
--  Resource blocks were assigned confidence categories based on the number
    of data informing each block estimate and the spacing and geometric
    distribution of those data;
--  For Safari deposit, estimates informed by consistently 20 x 20 metre or
    closer spaced drilling are classified as Measured and estimates informed
    by drill spacings between 20 x 20 and 40 x 40 metres are classified as
    Indicated. Estimates for areas of broader spaced drilling or at the
    peripheries of drill coverage are assigned to the Inferred category;
--  For Shaba deposit, estimates informed by consistently 30 x 30 metre or
    closer spaced drilling are classified as Measured and estimates informed
    by drill spacings between 30 x 30 and 40 x 40 metres are classified as
    Indicated. Estimates for areas of broader spaced drilling or at the
    peripheries of drill coverage are assigned to the Inferred category.

Qualified Persons' Statements

The technical information contained in this document that relates to the updated Kapulo Mineral Resource estimates is based on information compiled by Mr. Jonathon Abbott, a Member of the Australian Institute of Geoscientists. Mr Abbott is a full-time employee of MPR Geological Consultants Pty Ltd and is independent of Mawson West. Mr. Abbott has sufficient experience relevant to the style of mineralisation and type of deposit under consideration and to the activity he is undertaking to qualify as a Competent Person as defined in the 2012 edition of the "Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves" and as a Qualified Person as defined in National Instrument 43-101 "Standards of Disclosure for Mineral Projects". Mr. Abbott has reviewed and accepts responsibility for the technical information contained in this document that relates to Mineral Resources and has consented to the inclusion of the matters based on his information in the form and context in which it appears in this document.

The Qualified Person responsible for preparing sections of the NI43-101 Technical Report "Kapulo Copper Project, DRC" dated 30 June 2011 that deal with resource estimates in that report and is referred to in this document (Mr Steve LeBrun) is no longer employed by Coffey Mining, and, therefore, where Mr LeBrun was responsible for preparing the defined portions of the Technical Report, Coffey consents to being named in Mawson West Limited's announcement "Kapulo Project Mineral Resource Update", dated January 22, 2014. Coffey confirms that this document has been reviewed, including the written disclosure of the Technical Report summarised in the document, and Coffey has no reason to believe that there are any misrepresentations in the information contained therein that are derived from the Technical Report or within its knowledge as a result of the services performed by Coffey in connection with the preparation of the Technical Report.

About Mawson West

Mawson West is a copper and silver-focused resource company listed on the Toronto Stock Exchange (TSX) and based in Perth, Australia.

The Company's two key projects are the Dikulushi copper-silver mine and the Kapulo copper mine located in the South Eastern province of the Democratic Republic of Congo (DRC). Mawson West also continues to focus on exploring multiple prospective targets located within its significant land holding of approximately 7,300km2 in the DRC's rich copper belt.

Forward-looking statements

This news release contains certain "forward looking statements". These statements reflect management's current beliefs with respect to future events and are based on information currently available to management of the Company. Forward-looking statements involve significant risks, uncertainties and assumptions. Many factors could cause the Company's actual results, performance or achievements to be materially different from any future results, performance or achievements that may be expressed or implied by such forward-looking statements, including (without limitation) the risks identified in the "Risk Factors" section of the Company's Annual Information Form and other public filings (copies of which may be obtained at www.sedar.com). The results or events depicted in these forward-looking statements may differ materially from actual results or events. Any forward-looking statement speaks only as of the date of this news release and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise.

The Toronto Stock Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of the content of this press release.

Appendix A - Previous Kapulo Mineral Resource Estimates

Shaba, Safari North and Safari South June 2011 Mineral Resource estimates above 0.3% Cu cut-off grade. Ordinary kriged estimates using 2m cut Cu composites, parent cell dimensions of 10mE x 20mN x 5mRL, depleted for artisanal surface mining. Source: NI43-101 Technical Report "Kapulo Copper Project, DRC" dated 30 June 2011.


----------------------------------------------------------------------------
Classifica                            Grade   Cu Metal      Grade   Ag Metal
 tion            Zone         Mt      (Cu%)   (Tonnes)   (Ag ppm)      (MOz)
----------------------------------------------------------------------------
                               Shaba Deposit
----------------------------------------------------------------------------
Indicated          HW      1.710        7.7    131,650         23       1.24
                   FW      3.280        1.4     45,650          3       0.30
          ------------------------------------------------------------------
             Subtotal      4.990        3.6    177,300         10       1.54
----------------------------------------------------------------------------
Inferred           HW      0.195        7.4     14,400         30       0.19
                   FW      0.829        1.1      8,800          5       0.12
          ------------------------------------------------------------------
             Subtotal      1.024        2.3     23,200         10       0.31
----------------------------------------------------------------------------
                           Safari North Deposit
----------------------------------------------------------------------------
Indicated          HW      0.509        4.8     24,360         10       0.16
                   FW      0.451        1.8      7,950          3       0.05
          ------------------------------------------------------------------
             Subtotal      0.959        3.4     32,310          7       0.21
----------------------------------------------------------------------------
Inferred           HW      0.313        4.1     12,875          8       0.08
                   FW      0.693        1.3      9,075          3       0.06
          ------------------------------------------------------------------
             Subtotal      1.006        2.2     21,950          4       0.14
----------------------------------------------------------------------------
                           Safari South Deposit
----------------------------------------------------------------------------
Indicated          HW
                   FW
----------------------------------------------------------------------------
             Subtotal
----------------------------------------------------------------------------
Inferred           HW      0.098        4.2      4,150          1       0.01
                   FW      0.294        1.1      3,095          1       0.01
----------------------------------------------------------------------------
             Subtotal      0.392        1.8      7,245          1       0.01
----------------------------------------------------------------------------

Note: Figures have been rounded. "HW" refers to Hangingwall portion (domain) of each deposit. "FW" refers to the footwall portion (domain).

Mt = million tonnes

Contacts:
Mawson West Limited
Bruce McFadzean
Chief Executive Officer and Managing Director
+61 8 9485 9800
[email protected]

Mawson West Limited
Mark Di Silvio
Chief Financial Officer
+61 8 9485 9800
[email protected]

MAGNUS Investor Relations
Kusal Meemeduma
+61 2 8999 1010
[email protected]

Roth Investor Relations Inc.
Michelle Roth
+1 732 792 2200
[email protected]

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
The 4th International DevOps Summit, co-located with16th International Cloud Expo – being held June 9-11, 2015, at the Javits Center in New York City, NY – announces that its Call for Papers is now open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's large...
"There is a natural synchronization between the business models, the IoT is there to support ,” explained Brendan O'Brien, Co-founder and Chief Architect of Aria Systems, in this SYS-CON.tv interview at the 15th International Cloud Expo®, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Verizon Enterprise Solutions is simplifying the cloud-purchasing experience for its clients, with the launch of Verizon Cloud Marketplace, a key foundational component of the company's robust ecosystem of enterprise-class technologies. The online storefront will initially feature pre-built cloud-based services from AppDynamics, Hitachi Data Systems, Juniper Networks, PfSense and Tervela. Available globally to enterprises using Verizon Cloud, Verizon Cloud Marketplace provides a one-stop shop fo...
Leysin American School is an exclusive, private boarding school located in Leysin, Switzerland. Leysin selected an OpenStack-powered, private cloud as a service to manage multiple applications and provide development environments for students across the institution. Seeking to meet rigid data sovereignty and data integrity requirements while offering flexible, on-demand cloud resources to users, Leysin identified OpenStack as the clear choice to round out the school's cloud strategy. Additional...
The major cloud platforms defy a simple, side-by-side analysis. Each of the major IaaS public-cloud platforms offers their own unique strengths and functionality. Options for on-site private cloud are diverse as well, and must be designed and deployed while taking existing legacy architecture and infrastructure into account. Then the reality is that most enterprises are embarking on a hybrid cloud strategy and programs. In this Power Panel at 15th Cloud Expo (http://www.CloudComputingExpo.com...
We are all here because we are sold on the transformative promise of The Cloud. But what good is all of this ephemeral, on-demand infrastructure if your usage doesn't actually improve the agility and speed of your business? How must Operations adapt in order to avoid stifling your Cloud initiative? In his session at DevOps Summit, Damon Edwards, co-founder and managing partner of the DTO Solutions, will highlight the successful organizational, process, and tooling patterns of high-performing c...
The definition of IoT is not new, in fact it’s been around for over a decade. What has changed is the public's awareness that the technology we use on a daily basis has caught up on the vision of an always on, always connected world. If you look into the details of what comprises the IoT, you’ll see that it includes everything from cloud computing, Big Data analytics, “Things,” Web communication, applications, network, storage, etc. It is essentially including everything connected online from ha...
Software-driven innovation is becoming a primary approach to how businesses create and deliver new value to customers. A survey of 400 business and IT executives by the IBM Institute for Business Value showed businesses that are more effective at software delivery are also more profitable than their peers nearly 70 percent of the time (1). DevOps provides a way for businesses to remain competitive, applying lean and agile principles to software development to speed the delivery of software that ...
Docker offers a new, lightweight approach to application portability. Applications are shipped using a common container format and managed with a high-level API. Their processes run within isolated namespaces that abstract the operating environment independently of the distribution, versions, network setup, and other details of this environment. This "containerization" has often been nicknamed "the new virtualization." But containers are more than lightweight virtual machines. Beyond their small...
The move in recent years to cloud computing services and architectures has added significant pace to the application development and deployment environment. When enterprise IT can spin up large computing instances in just minutes, developers can also design and deploy in small time frames that were unimaginable a few years ago. The consequent move toward lean, agile, and fast development leads to the need for the development and operations sides to work very closely together. Thus, DevOps become...
Cloud Expo 2014 TV commercials will feature @ThingsExpo, which was launched in June, 2014 at New York City's Javits Center as the largest 'Internet of Things' event in the world.

ARMONK, N.Y., Nov. 20, 2014 /PRNewswire/ --  IBM (NYSE: IBM) today announced that it is bringing a greater level of control, security and flexibility to cloud-based application development and delivery with a single-tenant version of Bluemix, IBM's

An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and asse...
Explosive growth in connected devices. Enormous amounts of data for collection and analysis. Critical use of data for split-second decision making and actionable information. All three are factors in making the Internet of Things a reality. Yet, any one factor would have an IT organization pondering its infrastructure strategy. How should your organization enhance its IT framework to enable an Internet of Things implementation? In his session at Internet of @ThingsExpo, James Kirkland, Chief Ar...
Technology is enabling a new approach to collecting and using data. This approach, commonly referred to as the "Internet of Things" (IoT), enables businesses to use real-time data from all sorts of things including machines, devices and sensors to make better decisions, improve customer service, and lower the risk in the creation of new revenue opportunities. In his General Session at Internet of @ThingsExpo, Dave Wagstaff, Vice President and Chief Architect at BSQUARE Corporation, discuss the ...