Click here to close now.

SYS-CON MEDIA Authors: Liz McMillan, Pat Romanski, Carmen Gonzalez, Kevin Jackson, Peter Silva

News Feed Item

Met Tests Confirm Potential to Leach Gold Standard's Bald Mountain Gold-Copper Oxide Discovery on Railroad Project With Preliminary Agitation-Leach Recoveries Averaging 82.2%

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 01/23/14 -- Gold Standard Ventures Corp. (TSX VENTURE: GSV)(NYSE MKT: GSV)(NYSE Amex: GSV) ("Gold Standard" or the "Company") (www.goldstandardv.com) today released results from metallurgical tests on the Bald Mountain gold-copper oxide discovery made by Gold Standard last fall on its 100%-owned Railroad Project in the Carlin Trend of Nevada. The tests, performed by Inspectorate Labs of Reno, Nevada, reported an average 82.2% recovery of gold after one hour of cyanide agitation leach.

As reported on October 2, 2013, the first hole drilled into the Bald Mountain target, vertical core hole RRB13-1, intersected 56.1 meters of 1.47 g Au/T, including an internal interval of 7.3 meters of 5.66 g Au/T. Importantly, the gold intercept was hosted entirely in oxidized hornfels breccia, representing the most significant oxidized gold mineralization found to date in the northern Railroad project area. Gold in oxidized mineralization can typically be recovered using methods such as cyanide leaching which are less expensive and less capital-intensive than those required to recover gold from non-oxidized (sulphide) material.

Immediately below the gold intercept, RRB13-1 also intersected a separate copper zone returning 23.3 meters of 0.4% copper as well as narrower but high-grade intercepts of other base metals and silver.

Recognizing the potential economic significance of the Bald Mountain discovery, Gold Standard commissioned metallurgical tests of the core. Inspectorate used the following procedure: 30 gram samples were agitation-leached for one hour at room temperature in 60mls of 0.3% sodium cyanide solution. The solution also had a 0.3% concentration of sodium hydroxide in order to stabilize the pH at greater than 10. Pregnant solutions were analyzed by a matrix-matched-calibrated AAS. Internal blanks, standards and duplicates were also analyzed at a frequency of approximately one of each for every 35 samples.

Fourteen of fifteen samples provided an unweighted average recovery of 82.2%. The better recoveries were skewed toward the higher grade samples (see table below):


      Gold Standard Ventures RRB13-01: 15 pulp samples for Au - 30 - CN

                      AuAA 23 ppm    Au ppm 30 CN
Sample #                   Chemex    Inspectorate    Au Recovery %    Cu ppm

RRB13-01 680                1.355            1.33               98       464
RRB13-01 684                0.883            0.75               85       316
RRB13-01 702                  2.4            2.02               84       549
RRB13-01 712                 6.75            5.61               83       402
RRB13-01 716.5              12.85           10.61               83       218
RRB13-01 721.5               4.04             3.8               94       323
RRB13-01 730                0.952             0.8               84       380
RRB13-01 743                0.433            0.37               85       494
RRB13-01 772                0.381            0.24               63       787
RRB13-01 792                1.705            1.42               83       601
RRB13-01 802                  2.5            1.74               70       756
RRB13-01 812                1.415            1.08               76       137
RRB13-01 827                 1.22            0.99               81       404
RRB13-01 834                0.623            0.51               82       855
RRB13-01 861                0.569             0.1               18      1110

Dave Mathewson, Gold Standard's Vice President of Exploration, stated: "We are very pleased with the excellent preliminary metallurgical results from the Bald Mountain target. Visually, we have been seeing very deep and strong oxidation in the holes we have been drilling in the Central Bullion area. Now that we have confirmed that these oxide opportunities are likely to be leachable, especially as indicated in RRB13-01, we will focus on expanding the Bald Mountain target and identifying other oxide opportunities in the area."

Gold Standard also herewith reports the most significant assay from two holes, RRB13-02 & RRB13-03, completed in late 2013 within the Central Bullion area, from the Sylvania and Steve's Camp targets, respectively. While the mineralization in these targets remains of interest, work in the Central Bullion area will focus on the high gold values found at Bald Mountain.

Please see table below for detailed Intercepts for RRB 13-2 and RRB 13-3.


----------------------------------------------------------------------------
Drill Hole   Intercept (m) Thickness (m) Au Grade (g/t)                Other
                                                        Ag, Cu, Pb, Zn, ETC.
----------------------------------------------------------------------------
RRB13-02         91.8-98.5           6.7                       0.54 oz Ag/st
----------------------------------------------------------------------------
                                                                   0.30 % Cu
----------------------------------------------------------------------------
                                                                    0.05% Mo
----------------------------------------------------------------------------
                                                                    0.25% Zn
----------------------------------------------------------------------------
               123.3-127.7           4.4                       1.73 oz Ag/st
----------------------------------------------------------------------------
                                                                    0.29% Cu
----------------------------------------------------------------------------
                                                                    0.22% Pb
----------------------------------------------------------------------------
                                                                    0.64% Zn
----------------------------------------------------------------------------
               138.4-146.8           8.4           0.06        0.92 oz Ag/st
----------------------------------------------------------------------------
                                                                   0.24 % Cu
----------------------------------------------------------------------------
                                                                   0.11 % Pb
----------------------------------------------------------------------------
                                                                   0.18 % Zn
----------------------------------------------------------------------------
               189.6-196.3           6.7                       6.71 oz Ag/st
----------------------------------------------------------------------------
                                                                   0.75 % Cu
----------------------------------------------------------------------------
                                                                   0.13 % Mo
----------------------------------------------------------------------------
                                                                   0.24 % Pb
----------------------------------------------------------------------------
                                                                    0.23% Zn
----------------------------------------------------------------------------
               247.5-254.7           7.2                       0.25 oz Ag/st
----------------------------------------------------------------------------
                                                                   0.27 % Cu
----------------------------------------------------------------------------
                                                                   0.06 % Zn
----------------------------------------------------------------------------
RRB13-03           4.1-8.8           4.7                            0.17% Cu
----------------------------------------------------------------------------
                 22.6-43.0          20.4                            0.42% Cu
----------------------------------------------------------------------------
                                                                    0.08% Zn
----------------------------------------------------------------------------
                 60.1-62.8           2.7                            0.13% Cu
----------------------------------------------------------------------------
                 91.2-99.1           7.9           0.28        0.29 oz Ag/st
----------------------------------------------------------------------------
                                                                    0.19% Cu
----------------------------------------------------------------------------
                                                                    0.21% Zn
----------------------------------------------------------------------------
(i)Note: the gold intervals reported in the above table are based on a 0.200
 g Au/t cutoff. Weighted averaging has been used to calculate all reported
 intervals. The reported gold intervals may, or may not represent true
 thicknesses and, or widths. In general, the gold distribution within these
 large, complex breccia bodies tends to be irregular and will require
 additional drilling to establish true widths.

Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance: All sampling was conducted under the supervision of the Company's project geologists and the chain of custody from the drill to the sample preparation facility was continuously monitored. Core was cut at the company's facility in Elko and one half was sent to the lab for analysis and the other half retained in the original core box. A blank, quarter core duplicate or certified reference material was inserted approximately every tenth sample. The samples are delivered to ALS Minerals preparation facility in Elko. The samples are crushed and pulverized and sample pulps are shipped to ALS Minerals certified laboratory in Vancouver. Pulps are digested and analyzed for gold using fire assay fusion and an atomic absorption spectroscopy (AAS) finish on a 30 gram split. All other elements are determined by ICP analysis. Data verification of the analytical results includes a statistical analysis of the duplicates, standards and blanks that must pass certain parameters for acceptance to insure accurate and verifiable results.

The scientific and technical content and interpretations contained in this news release have been reviewed, verified and approved by Steven R. Koehler, Gold Standard's Manager of Projects, BSc. Geology and CPG-10216, a Qualified Person as defined by NI 43-101, Standards of Disclosure for Mineral Projects.

ABOUT GOLD STANDARD VENTURES - Gold Standard Ventures is focused on the acquisition and exploration of gold projects in North Central Nevada. Gold Standard currently holds a portfolio of projects totaling approximately 40,000 acres of prospective ground within North Central Nevada and the Walker Lane of which 18,130 acres comprise the flagship Railroad Gold Project on the productive Carlin Gold Trend.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) nor the NYSE MKT accepts responsibility for the adequacy or accuracy of this news release.

On behalf of the Board of Directors of Gold Standard,

Jonathan Awde, President and Director

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. All statements, other than statements of historical fact, included herein including, without limitation, statements about our current drill plans are forward looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, the following risks: operational risks associated with mineral exploration; unanticipated geological formations, fluctuations in commodity prices; title matters; and the additional risks identified in our filings with Canadian securities regulators on SEDAR in Canada (available at www.sedar.com) and with the SEC on EDGAR (available at www.sec.gov/edgar.shtml). Furthermore, the existence of gold deposits on nearby properties is not necessarily indicative of the mineralization on our properties. These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
SYS-CON Media announced today that @WebRTCSummit Blog, the largest WebRTC resource in the world, has been launched. @WebRTCSummit Blog offers top articles, news stories, and blog posts from the world's well-known experts and guarantees better exposure for its authors than any other publication. @WebRTCSummit Blog can be bookmarked ▸ Here @WebRTCSummit conference site can be bookmarked ▸ Here
Health care systems across the globe are under enormous strain, as facilities reach capacity and costs continue to rise. M2M and the Internet of Things have the potential to transform the industry through connected health solutions that can make care more efficient while reducing costs. In fact, Vodafone's annual M2M Barometer Report forecasts M2M applications rising to 57 percent in health care and life sciences by 2016. Lively is one of Vodafone's health care partners, whose solutions enable o...
SYS-CON Events announced today that Ciqada will exhibit at SYS-CON's @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Ciqada™ makes it easy to connect your products to the Internet. By integrating key components - hardware, servers, dashboards, and mobile apps - into an easy-to-use, configurable system, your products can quickly and securely join the internet of things. With remote monitoring, control, and alert messaging capability, you will mee...
SYS-CON Events announced today that GENBAND, a leading developer of real time communications software solutions, has been named “Silver Sponsor” of SYS-CON's WebRTC Summit, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. The GENBAND team will be on hand to demonstrate their newest product, Kandy. Kandy is a communications Platform-as-a-Service (PaaS) that enables companies to seamlessly integrate more human communications into their Web and mobile applicatio...
Public Cloud IaaS started it's life in the developer and startup communities and has grown rapidly to a $20B+ industry, but it still pales in comparison to how much is spent worldwide on IT: $3.6 trillion. In fact, there are 8.6 million data centers worldwide, the reality is many small and medium sized business have server closets and colocation footprints filled with servers and storage gear. While on-premise environment virtualization may have peaked at 75%, the Public Cloud has lagged in ado...
Dave will share his insights on how Internet of Things for Enterprises are transforming and making more productive and efficient operations and maintenance (O&M) procedures in the cleantech industry and beyond. Speaker Bio: Dave Landa is chief operating officer of Cybozu Corp (kintone US). Based in the San Francisco Bay Area, Dave has been on the forefront of the Cloud revolution driving strategic business development on the executive teams of multiple leading Software as a Services (SaaS) ap...
The best mobile applications are augmented by dedicated servers, the Internet and Cloud services. Mobile developers should focus on one thing: writing the next socially disruptive viral app. Thanks to the cloud, they can focus on the overall solution, not the underlying plumbing. From iOS to Android and Windows, developers can leverage cloud services to create a common cross-platform backend to persist user settings, app data, broadcast notifications, run jobs, etc. This session provide...
SYS-CON Events announced today that BroadSoft, the leading global provider of Unified Communications and Collaboration (UCC) services to operators worldwide, has been named “Gold Sponsor” of SYS-CON's WebRTC Summit, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BroadSoft is the leading provider of software and services that enable mobile, fixed-line and cable service providers to offer Unified Communications over their Internet Protocol networks. The Compa...
While not quite mainstream yet, WebRTC is starting to gain ground with Carriers, Enterprises and Independent Software Vendors (ISV’s) alike. WebRTC makes it easy for developers to add audio and video communications into their applications by using Web browsers as their platform. But like any market, every customer engagement has unique requirements, as well as constraints. And of course, one size does not fit all. In her session at WebRTC Summit, Dr. Natasha Tamaskar, Vice President, Head of C...
ProfitBricks, the provider of painless cloud infrastructure IaaS, today released its SDK for Ruby, written against the company's new RESTful API. The new SDK joins ProfitBricks' previously announced support for the popular multi-cloud open-source Fog project. This new Ruby SDK, which exposes advanced functionality to take advantage of ProfitBricks' simplicity and productivity, aligns with ProfitBricks' mission to provide a painless way to automate infrastructure in the cloud. Ruby is a genera...
The 5th International DevOps Summit, co-located with 17th International Cloud Expo – being held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the...
DevOps tasked with driving success in the cloud need a solution to efficiently leverage multiple clouds while avoiding cloud lock-in. Flexiant today announces the commercial availability of Flexiant Concerto. With Flexiant Concerto, DevOps have cloud freedom to automate the build, deployment and operations of applications consistently across multiple clouds. Concerto is available through four disruptive pricing models aimed to deliver multi-cloud at a price point everyone can afford.
WebRTC is an up-and-coming standard that enables real-time voice and video to be directly embedded into browsers making the browser a primary user interface for communications and collaboration. WebRTC runs in a number of browsers today and is currently supported in over a billion installed browsers globally, across a range of platform OS and devices. Today, organizations that choose to deploy WebRTC applications and use a host machine that supports audio through USB or Bluetooth can use Plantro...
ProfitBricks has launched its new DevOps Central and REST API, along with support for three multi-cloud libraries and a Python SDK. This, combined with its already existing SOAP API and its new RESTful API, moves ProfitBricks into a position to better serve the DevOps community and provide the ability to automate cloud infrastructure in a multi-cloud world. Following this momentum, ProfitBricks has also introduced several libraries that enable developers to use their favorite language to code ...
What exactly is a cognitive application? In her session at 16th Cloud Expo, Ashley Hathaway, Product Manager at IBM Watson, will look at the services being offered by the IBM Watson Developer Cloud and what that means for developers and Big Data. She'll explore how IBM Watson and its partnerships will continue to grow and help define what it means to be a cognitive service, as well as take a look at the offerings on Bluemix. She will also check out how Watson and the Alchemy API team up to off...