|By Business Wire||
|January 28, 2014 06:00 AM EST||
James Schlueter, President, Effective Health Systems (www.effectivehealthsystems.com), reported a study that evaluated the effectiveness of experienced workers compensation claims adjusters at determining whether a medical treatment request should be approved or escalated to a higher-level review. The study found the effectiveness of adjusters in making a correct decision was less than would be expected from flipping a coin.
The study involved a retrospective review of 6,250 medical requests submitted to workers compensation payers for approval. Seventy-percent (4,513) requests were from California, the remainder came from 36 other states. Each request had a defined diagnosis code (ICD9) and a medical code (CPT, HCPCS). In each of these instances, a claims adjuster followed their internal practices to either authorize the request or escalate it to a higher-level medical review.
The data was subsequently processed through EHS’ BaseLine technology. The Pre-Authorization Decision application within the BaseLine platform collects the diagnosis code, the medical code, and number of treatments/procedures being requested; it also compiles historic claim data to account for previous approvals. Then it bounces the request off national evidence-based guidelines, such as ODG, ACOEM or state specific guidelines. The application incorporates specific client customizations to the guidelines to control for unique items such as high cost procedures or surgical requests, where regardless of the evidence or number being requested, a higher-level review is just good practice.
The adjusters authorized 4,546 (73%) of the medical requests and sent 1,704 (27%) of the requests to a higher-level review. BaseLine found that only 2,696 (43%) should have been authorized at the adjuster desk, while 3,555 (57%) should have been escalated to a higher-level review.
Digging deeper into the data the retrospective review showed that of the 1,701 requests that the adjusters escalated to UR, the adjuster should have authorized 715 (42%) of the requests; while 986 (58%) met the evidence standards for the investment in UR.
On the other hand, of the 4,546 requests that the adjusters authorized, only 1,980 (44%) should have been authorized at the adjuster’s desk. Remarkably, 2,566 (56%) of the requests authorized by the adjuster had a diagnosis/treatment code combination that represented a significant likelihood that it would have been modified in some fashion by UR had it been escalated.
According to Schlueter, “The bottom-line is that adjusters are not medically trained professionals but they are being asked to make complex medical decisions in the name of operational efficiency. Without the support offered by BaseLine, the outcomes with this scenario are simply not effective. BaseLine bridges the gap between operational efficiency and organization effectiveness. BaseLine streamlines workflows and provides critical information and guidance adjusters need to do what they do best.”
For a discussion regarding the potential financial costs of this model on payers and TPA’s, EHS has prepared a complimentary white paper available by sending an email to [email protected]. Please put the words “Adjuster Effectiveness” in the subject line and include your contact information.
EHS released an abbreviated mobile-accessible version of the BaseLine pre-authorization decision tool. It is offered on a free-trial basis. The mobile application is a demonstration of how the API web-services can integrate BaseLine functionalities into the backend of any existing technology. To access a mobile app for free: https://pa.effectivehealthsystems.com/
About Effective Health Systems:
Effective Health Systems, (www.effectivehealthsystems.com) delivers technologies that help claims professionals do their jobs better. BaseLine is an inexpensive, quickly deployable and non-disruptive innovation to claims management. To learn more visit our website www.effectivehealthsystems.com.
High-performing enterprise Software Quality Assurance (SQA) teams validate systems that are ready for use - getting most actively involved as components integrate and form complete systems. These teams catch and report on defects, making sure the customer gets the best software possible. SQA teams have leveraged automation and virtualization to execute more thorough testing in less time - bringing Dev and Ops together, ensuring production readiness. Does the emergence of DevOps mean the end of E...
Nov. 27, 2014 05:00 AM EST Reads: 1,185
"Matrix is an ambitious open standard and implementation that's set up to break down the fragmentation problems that exist in IP messaging and VoIP communication," explained John Woolf, Technical Evangelist at Matrix, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Nov. 27, 2014 04:00 AM EST Reads: 1,002
We are reaching the end of the beginning with WebRTC, and real systems using this technology have begun to appear. One challenge that faces every WebRTC deployment (in some form or another) is identity management. For example, if you have an existing service – possibly built on a variety of different PaaS/SaaS offerings – and you want to add real-time communications you are faced with a challenge relating to user management, authentication, authorization, and validation. Service providers will w...
Nov. 27, 2014 04:00 AM EST Reads: 1,045
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective ...
Nov. 26, 2014 11:45 PM EST Reads: 1,130
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happe...
Nov. 26, 2014 11:30 PM EST Reads: 1,019
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrateg...
Nov. 26, 2014 09:00 PM EST Reads: 1,066
Cultural, regulatory, environmental, political and economic (CREPE) conditions over the past decade are creating cross-industry solution spaces that require processes and technologies from both the Internet of Things (IoT), and Data Management and Analytics (DMA). These solution spaces are evolving into Sensor Analytics Ecosystems (SAE) that represent significant new opportunities for organizations of all types. Public Utilities throughout the world, providing electricity, natural gas and water,...
Nov. 26, 2014 06:00 PM EST Reads: 1,057
Want to enable self-service provisioning of application environments in minutes that mirror production? Can you automatically provide rich data with code-level detail back to the developers when issues occur in production? In his session at DevOps Summit, David Tesar, Microsoft Technical Evangelist on Microsoft Azure and DevOps, will discuss how to accomplish this and more utilizing technologies such as Microsoft Azure, Visual Studio online, and Application Insights in this demo-heavy session.
Nov. 26, 2014 04:45 PM EST Reads: 748
When an enterprise builds a hybrid IaaS cloud connecting its data center to one or more public clouds, security is often a major topic along with the other challenges involved. Security is closely intertwined with the networking choices made for the hybrid cloud. Traditional networking approaches for building a hybrid cloud try to kludge together the enterprise infrastructure with the public cloud. Consequently this approach requires risky, deep "surgery" including changes to firewalls, subnets...
Nov. 26, 2014 04:45 PM EST Reads: 737
DevOps is all about agility. However, you don't want to be on a high-speed bus to nowhere. The right DevOps approach controls velocity with a tight feedback loop that not only consists of operational data but also incorporates business context. With a business context in the decision making, the right business priorities are incorporated, which results in a higher value creation. In his session at DevOps Summit, Todd Rader, Solutions Architect at AppDynamics, discussed key monitoring techniques...
Nov. 26, 2014 04:45 PM EST Reads: 740
The Internet of Things will greatly expand the opportunities for data collection and new business models driven off of that data. In her session at @ThingsExpo, Esmeralda Swartz, CMO of MetraTech, discussed how for this to be effective you not only need to have infrastructure and operational models capable of utilizing this new phenomenon, but increasingly service providers will need to convince a skeptical public to participate. Get ready to show them the money!
Nov. 26, 2014 04:00 PM EST Reads: 1,097
One of the biggest challenges when developing connected devices is identifying user value and delivering it through successful user experiences. In his session at Internet of @ThingsExpo, Mike Kuniavsky, Principal Scientist, Innovation Services at PARC, described an IoT-specific approach to user experience design that combines approaches from interaction design, industrial design and service design to create experiences that go beyond simple connected gadgets to create lasting, multi-device exp...
Nov. 26, 2014 03:45 PM EST Reads: 1,045
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect...
Nov. 26, 2014 02:00 PM EST Reads: 1,508
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using ...
Nov. 25, 2014 09:30 PM EST Reads: 1,260
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series dat...
Nov. 25, 2014 09:30 PM EST Reads: 1,323