|By PR Newswire||
|February 4, 2014 11:25 PM EST||
CYPRESS, Calif., Feb. 4, 2014 /PRNewswire/ -- Nitto Tire, a leading manufacturer of high-performance street and off-road tires, returns again this year as presenting sponsor of the 2014 Griffin King of the Hammers off-road race. The company has also increased its sponsorship of drivers in the event and will back a total of nine entries in 2014, up from six in 2013.
The eighth running of the Griffin King of the Hammers Presented by Nitto Tire is set for Fri., Feb. 7, 2014 in California's rugged Johnson Valley. The tough 4x4 race will be the culmination of this year's week-long event that also features a vendor show, entertainment and spectator areas.
Considered by many as one of the toughest single-day off-road events in the world, the King of the Hammers combines aspects of desert racing and rock crawling. The event pits highly skilled drivers and finely tuned vehicles against the area's sand, hard-packed rock trails, near-vertical rock walls and treacherous ledges in breathtaking fashion. Each year, the Hammers takes its toll on the participants, with less than half of the drivers finishing the race. The event has evolved from an invitation-only, non-spectator event with13 participants to more than 180 teams competing in front of more than 35,000 fans on-site and nearly a half-million online. At the culmination of the main race ending at 10:00 p.m. PST on Friday, Nitto will award the winning team with the customized King of the Hammers Nitto championship ring.
Nitto Tire has made an aggressive commitment to this signature Ultra4 racing event as the presenting sponsor and sponsor of nine racing teams. That impressive roster includes three former King of the Hammers champions: 2012 winner Erik Miller, 2010 winner Loren Healy and 2009 winner Jason Scherer. All Nitto-sponsored drivers will be running the Nitto Trail Grappler, a durable off-road tire that had no flats in last year's event.
Nitto welcomes two new drivers to its already impressive lineup for the 2014 season including:
Erik Miller (Cumberland, MD) – #4421 Miller Motorsports Ultra4 buggy; 2012 King of the Hammers champion
Ben Napier (Sydney, Australia) – #4461 BN Motorsports Ultra 4 buggy; 5th place finish in 2013 King of the Hammers
The remaining six drivers have returned to the Nitto Tire team for the 2014 season and include:
Loren Healy (Farmington, NM) – #67 Jimmy's 4x4 Nitto Tire Ultra4 buggy; 2013 Ultra4 Superlift race winner; 2010 King of the Hammers champion
Rick Mooneyham (Lake Havasu City, AZ) – #554 Nitto Tire Trick Toys Fabrication Ultra4 buggy; 2013 Ultra4 American Rock Sports Challenge race winner
Nick Nelson (Las Vegas, NV) – #4404 Nitto Tire Ultra4 buggy; 2013 Ultra4 Glen Helen Grand Prix race winner and 2012 Ultra4 Series champion
Cottin and Randy Rodd (Cortez, CO) - #4407 Jimmy's 4x4 Nitto Tire Ultra 4 buggy
Jason Scherer (Walnut Creek, CA) – #76 Rubicon Express Nitto Tire Ultra4 buggy; 2013 Ultra4 Stampede and Ultra4 National Championship race winner; 2009 King of the Hammers champion
Mel Wade (Long Beach, CA) – #4451 Discount Tire Off-Road Evolution Jeep; 2013 Vegas to Reno desert race winner
Derek West (Springfield, MO) – #4420 Jimmy's 4x4 Nitto Tire Ultra4 buggy; 2013 Ultra4 Rausch Creek race winner
For more information about Ultra4 racing and the Griffin King of the Hammers event, visit www.ultra4racing.com. Learn more about Nitto-sponsored drivers at www.nittoracing.com. Complete details on Nitto tires can be found at www.nittotire.com. Join Nitto Tire on Facebook at www.facebook.com/NittoTire and on Twitter at @NittoTire.
About Nitto Tire U.S.A. Inc.
Nitto Tire (www.nittotire.com) develops performance tires for all uses, including racing, off-road and street. Using state-of-the-art manufacturing and testing facilities in Japan and the United States, Nitto provides innovative and high-quality performance tires for the most demanding automotive enthusiasts. For more information, visit the company's website or contact the company directly. Nitto is a registered trademark of Nitto Tire U.S.A. Inc., 5665 Plaza Drive, Ste. 250, Cypress, Calif., 90630.
SOURCE Nitto Tire U.S.A. Inc.
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective ...
Nov. 26, 2014 10:15 PM EST Reads: 956
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happe...
Nov. 26, 2014 10:00 PM EST Reads: 802
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrateg...
Nov. 26, 2014 09:00 PM EST Reads: 931
We are reaching the end of the beginning with WebRTC, and real systems using this technology have begun to appear. One challenge that faces every WebRTC deployment (in some form or another) is identity management. For example, if you have an existing service – possibly built on a variety of different PaaS/SaaS offerings – and you want to add real-time communications you are faced with a challenge relating to user management, authentication, authorization, and validation. Service providers will w...
Nov. 26, 2014 07:00 PM EST Reads: 957
Cultural, regulatory, environmental, political and economic (CREPE) conditions over the past decade are creating cross-industry solution spaces that require processes and technologies from both the Internet of Things (IoT), and Data Management and Analytics (DMA). These solution spaces are evolving into Sensor Analytics Ecosystems (SAE) that represent significant new opportunities for organizations of all types. Public Utilities throughout the world, providing electricity, natural gas and water,...
Nov. 26, 2014 06:00 PM EST Reads: 960
"Matrix is an ambitious open standard and implementation that's set up to break down the fragmentation problems that exist in IP messaging and VoIP communication," explained John Woolf, Technical Evangelist at Matrix, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Nov. 26, 2014 05:45 PM EST Reads: 910
Want to enable self-service provisioning of application environments in minutes that mirror production? Can you automatically provide rich data with code-level detail back to the developers when issues occur in production? In his session at DevOps Summit, David Tesar, Microsoft Technical Evangelist on Microsoft Azure and DevOps, will discuss how to accomplish this and more utilizing technologies such as Microsoft Azure, Visual Studio online, and Application Insights in this demo-heavy session.
Nov. 26, 2014 04:45 PM EST Reads: 610
When an enterprise builds a hybrid IaaS cloud connecting its data center to one or more public clouds, security is often a major topic along with the other challenges involved. Security is closely intertwined with the networking choices made for the hybrid cloud. Traditional networking approaches for building a hybrid cloud try to kludge together the enterprise infrastructure with the public cloud. Consequently this approach requires risky, deep "surgery" including changes to firewalls, subnets...
Nov. 26, 2014 04:45 PM EST Reads: 613
DevOps is all about agility. However, you don't want to be on a high-speed bus to nowhere. The right DevOps approach controls velocity with a tight feedback loop that not only consists of operational data but also incorporates business context. With a business context in the decision making, the right business priorities are incorporated, which results in a higher value creation. In his session at DevOps Summit, Todd Rader, Solutions Architect at AppDynamics, discussed key monitoring techniques...
Nov. 26, 2014 04:45 PM EST Reads: 630
The Internet of Things will greatly expand the opportunities for data collection and new business models driven off of that data. In her session at @ThingsExpo, Esmeralda Swartz, CMO of MetraTech, discussed how for this to be effective you not only need to have infrastructure and operational models capable of utilizing this new phenomenon, but increasingly service providers will need to convince a skeptical public to participate. Get ready to show them the money!
Nov. 26, 2014 04:00 PM EST Reads: 1,004
One of the biggest challenges when developing connected devices is identifying user value and delivering it through successful user experiences. In his session at Internet of @ThingsExpo, Mike Kuniavsky, Principal Scientist, Innovation Services at PARC, described an IoT-specific approach to user experience design that combines approaches from interaction design, industrial design and service design to create experiences that go beyond simple connected gadgets to create lasting, multi-device exp...
Nov. 26, 2014 03:45 PM EST Reads: 971
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect...
Nov. 26, 2014 02:00 PM EST Reads: 1,469
High-performing enterprise Software Quality Assurance (SQA) teams validate systems that are ready for use - getting most actively involved as components integrate and form complete systems. These teams catch and report on defects, making sure the customer gets the best software possible. SQA teams have leveraged automation and virtualization to execute more thorough testing in less time - bringing Dev and Ops together, ensuring production readiness. Does the emergence of DevOps mean the end of E...
Nov. 25, 2014 11:30 PM EST Reads: 1,135
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using ...
Nov. 25, 2014 09:30 PM EST Reads: 1,223
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series dat...
Nov. 25, 2014 09:30 PM EST Reads: 1,273