|By PR Newswire||
|February 25, 2014 07:00 AM EST||
ALBANY, New York, February 25, 2014 /PRNewswire/ --
Global Military Ammunition Market 2013 - 2023: Market Shares, Strategies, and Forecasts Research Report Now Available at MarketResearchReports.Biz
MarketResearchReports.Biz includes new market research report "The Global Military Ammunition Market 2013 - 2023" to its large collection of research report
This report is the result of SDI's extensive market and company research covering the global military ammunition industry. It provides detailed analysis of both historic and forecast global industry values, factors influencing demand, the challenges faced by industry participants, analysis of the leading companies in the industry, and key news.
Introduction and Landscape
Why was the report written?
"The Global Military Ammunition Market 2013-2023" offers the reader detailed analysis of the global military ammunition market over the next ten years, alongside potential market opportunities to enter the industry, using detailed market size forecasts.
What are the key drivers behind recent market changes?
Numerous countries in the world are currently involved in conflicts with their neighboring nations owing to reasons such as territorial disputes and terrorism. This situation is most commonly evident in the Asia Pacific region due to the rapid economic and military development among countries such as China, India, Japan, South Korea and North Korea among others. All the above mentioned countries are making rapid efforts in order to strengthen their military forces in order to be battle ready and thus involved in an arms race. And, battle readiness demands possessing adequate ammunition of various kinds including small caliber, artillery, mortar, large caliber and medium caliber. For example, India and Pakistan share tense relations owing to the territorial disputes between each other, as well as cross-border terrorism. The countries' militaries are involved in frequent cross-border firing despite their ceasefire agreement signed a decade ago. China and South Korea too share hostile relations owing to the Chinese government's intentions to reunite both the countries which are strongly opposed by the latter nation. Thus, South Korea is also making significant efforts in order to defend the Chinese military power when needed, though with the support of its allies such as the US.
TO Get Download Full Report with TOC: http://www.marketresearchreports.biz/sample/sample/179593
What makes this report unique and essential to read?
"The Global Military Ammunition Market 2013-2023" provides detailed analysis of the current industry size and growth expectations from 2013 to 2023, including highlights of key growth stimulators. It also benchmarks the industry against key global markets and provides detailed understanding of emerging opportunities in specific areas.
Key Features and Benefits
The report provides detailed analysis of the market for military ammunition during 2013-2023, including the factors that influence why countries are investing or cutting expenditure on military ammunition. It provides detailed expectations of growth rates and projected total expenditure.
The global ammunition industry is expected to witness a steady rise in the number of joint ventures and strategic alliances during the forecast period, due to the insufficient indigenous manufacturing capabilities of numerous countries such as the US, India, and Brazil. These countries are dependent on foreign ammunition manufacturers in order to meet demand and develop indigenous ammunition manufacturing capabilities. Some recent notable joint ventures are mentioned below:
By the end of 2013, Russia and India are expected to establish a joint venture to manufacture ammunition for the Smerch multiple launch rocket system in India. The Russian firms Rosoboronexport and OAO NPO Splav are expected to form a joint venture with the artillery production department of the Indian defense ministry in order to produce, as well as provide after sales support to, the specified ammunition in India.
In April 2012, General Dynamics Ordnance and Tactical Systems and Rheinmetall Defense announced the formation ofa joint venture called Defense Munitions International, LLC in order to develop and market the new and existing kinetic energy and multi-purpose cartridges, which are elements of tank ammunition. The JV intends to market these products in the US as well as international markets.
To Read Complete Report with TOC: http://www.marketresearchreports.biz/analysis/179593
Table of Content
1.1 What is this Report About?
1.3 Summary Methodology
1.4 About Strategic Defence Intelligence
2 Executive Summary
3 Global Military Ammunition Market Size and Drivers
3.1 Military Ammunition Market Size and Forecast 2013-2023
3.1.1 Global military ammunition market to show positive growth during the forecast period
3.2 Global Military Ammunition Market - Regional Analysis
3.2.1 North America to register highest spending in the global military ammunition market
3.2.2 Spending on small caliber ammunition significantly driving North American military ammunition market during the forecast period
3.2.3 Military ammunition market in the Asia-Pacific region is expected to witness consistent levels of growth over the forecast period
4 Industry Trends, Recent Developments and Challenges
4.1 Technological Developments
4.1.1 Precision Extended Range Munition to provide enhanced precision
4.1.2 Smart ammunition to result in increased lethality
4.1.3 Lead free small caliber ammunition in a step to reduce environmental contamination
4.2 Market Trends
4.2.1 The US Army developing lightweight ammunition to reduce soldier load
4.2.2 Precision munitions finding increasing usage among the militaries
Global and China Carbon Fiber Industry Report, 2013 - 2016
Carbon fiber is the new-generation reinforced fiber, mainly used in the fields of aerospace, wind power, automotive, sports and leisure. In 2013, the global industrial applications like wind power and automobiles showed the largest demand for carbon fiber, namely more than 60%, followed by aerospace, with the growing proportion of carbon fiber application and hence the demand steadily increased; while the growth of demand from sports and leisure was relatively slow.
In 2013, the global carbon fiber capacity totaled approximately 120,000 tons, mainly contributed by Japan and the U.S.. The world's top five companies -- Toray, Teijin, Zoltek, Mitsubishi Rayon and Formosa Plastics shared 55% of the global carbon fiber capacity together. In September, 2013, Toray acquired Zoltek to raise its market share to about 30%.
Carbon fiber is primarily divided into PAN-based carbon fiber whose utilization rate hits about 95%, and pitch-based carbon fiber. In 2013, two-thirds of the global small-tow (≤ 24K) PAN-based carbon fiber was produced by Toray, Teijin and Mitsubishi Rayon; three-fourths of the large-tow (> 24K) PAN-based carbon fiber was made by Zoltek and SGL; half of pitch-based carbon fiber was created by Kureha.
To Get Download Full Report with TOC: http://www.marketresearchreports.biz/sample/sample/188684
Though still in the initial stage, China carbon fiber industry has been developing fast under the stimulation of policies and the gap between supply and demand in recent years.
In 2009-2013, China's carbon fiber capacity grew at the CAGR of up to 53.5%, reaching 18,000 tons or so in 2013. However, the immature technology of Chinese carbon fiber manufacturers resulted in low quality, high production costs and poor profitability. In 2013, China's actual carbon fiber output was only about 3,000 tons, with the import dependency rate of around 76%.
China Express Material Industry Report, 2013 - 2016
In 2013, China e-commerce industry maintained strong-growth momentum of 2012, bringing explosive growth in express business volume and revenue. In 2013, the trade volume of express service enterprises above designated size accumulated to 9.19 billion pieces, up 61.6% year-on-year, while the revenue hit RMB144.17 billion accumulatively, up 36.6% year-on-year.
The express industry enjoys a sound development prospect as a whole, which will stimulate the development of the express material (including waybill, packing list envelope, and destructive plastic bag) industry as the upstream market in terms of the demand. In 2013, China express waybill market was sized at 9.2 billion pieces, of which, sticker waybill increased by 63% year-on-year to 7.5 billion pieces, while non-sticker waybill grew by 55% year-on-year to 1.7 billion pieces; in the meantime, China express packing list envelope market scale reached 3.14 billion pieces, up 53.3% year-on-year. Of them, 50% were exported to four leading express companies across the globe; in 2013, the scale of China express destructive plastic bag market jumped by 71% year-on-year to 5.3 billion pieces.
To Get Download Full Report with TOC: http://www.marketresearchreports.biz/sample/sample/188685
However, Chinese express material enterprises have weakness in the following aspects: small scale, sole business mode, dispersed operation, low degree of industrial concentration. In Chinese express waybill market, the combined market share of the top 10 industrial players in 2013 posted 45%. Among the top 10 in the ranking, Zhuhai Shenglong Barcode Technology, the industrial leader, took up only 9.87%. In express destructive plastic bag market, the combined market share of the top 10 industrial players was no more than 34.5%., and not a single firm can hold a market share of 10%. In particular, Zhongshan Jingcheng Plastic Products came to the first place in terms of market share, with the figure no more than 7.4%.
Failure Analysis Equipment Market - Global Industry Analysis, Size, Share, Growth, Trends And Forecast, 2012 - 2019
Failure analysis is an engineering approach to determining how and why component or equipment has failed. The goal of a failure analysis is to understand the root cause of the failure to prevent similar failures in the future. Common causes of failure include misuse or abuse, manufacturing defects, assembly errors, improper maintenance, design errors, improper material, fastener failure, improper heat treatments, inadequate quality assurance, inadequate environmental protection/control, unforeseen operating conditions and casting discontinuities.
This market research study analyzes the failure analysis equipment market on a global level, and provides estimates in terms of revenue (USD Billion) from 2013 to 2019. It recognizes the drivers and restraints affecting the industry and analyzes their impact over the forecasted period. Moreover, it identifies the significant opportunities for market growth in the years to come.
To Get Download Full Report with TOC: http://www.marketresearchreports.biz/sample/sample/174481
The report segments the market on the basis of geography into North America, Asia Pacific (APAC), Europe, and Rest of the World (RoW), and estimated in terms of revenue (USD Billion). In addition, the report segments the market based on equipments which includes Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), Focused Ion Beam Systems (FIB) and Dual Beam (FIB/SEM) Systems.
Furthermore, the report has also been segmented on the basis of end-use which includes Semiconductors Manufacturing, Fiber Optics, Bio medical and life sciences, Metallurgy, Nanotechnology and nanomaterials and Polymers. Moreover, the report segments the market based on technology which includes Focused Ion Beam (FIB), Broad Ion Milling (BIM), Secondary ion mass spectroscopy (SIMS), Energy dispersive X-ray spectroscopy (EDX), Reactive ion etching (RIE) and Chemical mechanical planarization (CMP). All these segments have also been estimated on the basis of geography in terms of revenue (USD Billion).
MarketResearchReports.biz [http://www.marketresearchreports.biz/] is the most comprehensive collection of market research reports. MarketResearchReports.Biz services are specially designed to save time and money for our clients. We are a one stop solution for all your research needs, our main offerings are syndicated research reports, custom research, subscription access and consulting services. We serve all sizes and types of companies spanning across various industries.
90 Sate Street, Suite 700
Albany, NY 12207
USA - Canada Toll Free: 866-997-4948
For Latest Reports under the Defense and Security Category: http://www.marketresearchreports.biz/category/139