SYS-CON MEDIA Authors: Mat Mathews, PR.com Newswire, David Smith, Tim Crawford, Kevin Benedict

News Feed Item

Molex Showcased NeoScale™ High-Speed Mezzanine System at DesignCon

Molex Incorporated announced its NeoScaleTM High-Speed Mezzanine System at DesignCon 2014, January 28-31, Santa Clara Convention Center in California. Delivering remarkably clean signal integrity at data rates of 28+ Gbps, the modular mezzanine interconnect is designed for high-density printed circuit board (PCB) mezzanine applications with limited PCB real estate. Industry applications include enterprise networking towers, telecommunication hubs and servers, industrial controllers, and medical and military high data-rate scanning equipment.

Comprised of a vertical plug and vertical receptacle, the NeoScale system features a patent pending modular triad wafer design which enables customizable PCB routing in high-density applications. Molex patented Solder-Charge Technology™ PCB attachment method provides for reliable and robust solder joints. This innovative design allows designers to mix and match 85Ω, 100Ω and power triads to build a mezzanine solution that meets their specific application requirements.

Adam Stanczak, global new product development manager, Molex, notes: “The flexible and robust NeoScale Mezzanine interconnect system utilizes differential pair triads with dedicated ground shields to offer exceptionally clean signal transmission compared to other mezzanine connectors available in the marketplace today. System architects and hardware engineers can count on a highly reliable and easily customizable design tool for a host of high density system applications.”

The modular NeoScale triad wafer comprises three pins per differential pair—two signal pins and one shield pin. Each triad is a stand-alone, shielded 28 Gbps capable differential pair or an 8A power feed and can be optimized for signals supporting high-speed 85Ω or 100Ω differential pairs, high-speed single-ended transmissions, low-speed single-ended/control signals, as well as power pins.

The honeycomb construction of the NeoScale mezzanine interconnect housing routes each triad to minimize crosstalk and effectively route out of the PCB in one or two layers, essentially saving designers in the cost of PCB material. In addition, unique tombstone structures located in the connector housing protect the mating interface and flexible contacts to help prevent damage to the terminals.

The Molex NeoScale system is available in 12.00 to 42.00mm stack heights, circuit sizes of 8 to 300 triad wafers in 2-, 4-, 6-, 8- and 10-rows and 85 or 100 Ohm impedance to provide optimal design flexibility to address engineering constraints in system envelopes.

For more information about the NeoScaleTM mezzanine interconnect system, please visit www.molex.com/link/neoscale.html. To receive information on other Molex products and industry solutions, please sign up for our e-nouncement newsletter at www.molex.com/link/register.

About Molex Incorporated

Providing more than connectors, Molex delivers complete interconnect solutions for a number of markets including: data communications, telecommunications, consumer electronics, industrial, automotive, commercial vehicle, aerospace and defense, medical, and lighting. Established in 1938, the company operates 45 manufacturing locations in 17 countries. The Molex website is www.molex.com. Follow us at www.twitter.com/molexconnectors, watch our videos at www.youtube.com/molexconnectors, connect with us at www.facebook.com/molexconnectors and read our blog at www.connector.com.

Molex is a registered trademark of Molex Incorporated.

More Stories By Business Wire

Copyright © 2009 Business Wire. All rights reserved. Republication or redistribution of Business Wire content is expressly prohibited without the prior written consent of Business Wire. Business Wire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.