|By Marketwired .||
|March 17, 2014 05:13 PM EDT||
TORONTO, ONTARIO -- (Marketwired) -- 03/17/14 -- Canadian Orebodies Inc. (TSX VENTURE: CO) ("Orebodies" or the "Company") is pleased to highlight interim results from an additional 6 holes on the Farley Lake Mine Project, which the company has a 10% interest in through a joint venture with Carlisle Goldfields Limited (TSX: CGJ) ("Carlisle"), who is the operator of the project. Drill hole FL13-01 intersected 6.1 g/t gold ("Au") over 17.0m from 138.0m to 155.0m. Drilling at Farley Lake commenced in December 2013 (see Carlisle's Press Release dated December 12, 2013).
Carlisle's President and CEO, Abraham Drost commented that: "Our second set of drill results shows that the grade of Inferred resources encountered in the current drill program at Farley is holding up well. While there is more drilling to be done to convert Inferred ounces at Farley to the appreciable pre-feasibility ready Measured and Indicated gold resource at the Farley and MacLellan deposits under the recent optimized PEA (see Press Release dated February 27, 2014), we are off to a good start."
From To Drill Interval Au Grade Hole (m) (m) (m) (g/t) FL13-01 69.0 77.0 8.0 2.2 138.0 155.0 17.0 6.1 FL13-02 65.5 69.0 3.5 5.9 148.5 150.0 1.5 6.2 164.5 167.5 3.0 5.4 FL13-04 77.0 78.0 1.0 8.2 FL13-09 139.5 145.5 6.0 2.9 334.0 346.0 12.0 4.6 353.0 369.5 16.5 4.0 FL13-14 120 133 13.0 2.2 184 195 11.0 3.3 FL13-17 174 177 3.0 5.4 (i) Drill Results highlighted and sub results use an arbitrary cut-off grade of 0.60 g/t Au. (ii) true width calculations indicate that true width is in excess of 90% of core length.
Carlisle's exploration programs are carried out under the supervision of Peter Karelse P.Geo., Vice-President of Exploration, a Qualified Person as defined by NI 43-101, who reviewed and approved the technical content of this press release.
Samples were transported directly in secure containers from the Carlisle Goldfields site in Lynn Lake, Manitoba, to the TSL Laboratories in Saskatoon, Saskatchewan. TSL, which is an accredited ISO/IEC 17025 lab, assayed the samples using standard fire assay methods with a gravimetric finish. Certified standards are placed in the sample stream at a rate of one standard per 20 samples. Certified blanks are placed in the sample stream at a rate of one blank every 40 samples. One lab reject duplicate per 30 samples is submitted to an umpire lab for assay verification. Results are analyzed for acceptance at the time of import. All standards associated with the results in this press release were determined to be acceptable within the defined limits of the standard used.
About Orebodies: Canadian Orebodies is a Canadian-based mineral exploration company with a portfolio of properties in Nunavut, Ontario, and Manitoba. Canadian Orebodies trades on the TSXV under the symbol "CO". For more information please visit www.canadianorebodies.com.
This press release shall not constitute an offer to sell or solicitation of an offer to buy the securities in any jurisdiction. The Company's shares and other securities have not been and will not be registered under the United States Securities Act of 1933 and may not be offered or sold in the United States absent an applicable exemption from the registration requirements.
Except for statements of historical fact contained herein, the information in this press release may constitute "forward-looking information" within the meaning of Canadian securities law. Other than statements of historical fact, all statements are "forward-looking statements", including the establishment and estimate of resources, that involve various known and unknown risks and uncertainties and other factors. There can be no assurance that such statements will prove accurate. Results and future events could differ materially from those anticipated in such statements. Readers of this press release are cautioned not to place undue reliance on these "forward-looking statements". Except as otherwise required by applicable securities statutes or regulation, Carlisle expressly disclaims any intent or obligation to update publicly forward-looking information, whether as a result of new information, future events or otherwise.
Neither IIROC nor the TSX accepts responsibility for the adequacy or accuracy of this release.
Canadian Orebodies Inc.
President & CEO
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective ...
Nov. 26, 2014 07:15 PM EST Reads: 780
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrateg...
Nov. 26, 2014 07:00 PM EST Reads: 812
We are reaching the end of the beginning with WebRTC, and real systems using this technology have begun to appear. One challenge that faces every WebRTC deployment (in some form or another) is identity management. For example, if you have an existing service – possibly built on a variety of different PaaS/SaaS offerings – and you want to add real-time communications you are faced with a challenge relating to user management, authentication, authorization, and validation. Service providers will w...
Nov. 26, 2014 07:00 PM EST Reads: 902
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happe...
Nov. 26, 2014 07:00 PM EST Reads: 653
Cultural, regulatory, environmental, political and economic (CREPE) conditions over the past decade are creating cross-industry solution spaces that require processes and technologies from both the Internet of Things (IoT), and Data Management and Analytics (DMA). These solution spaces are evolving into Sensor Analytics Ecosystems (SAE) that represent significant new opportunities for organizations of all types. Public Utilities throughout the world, providing electricity, natural gas and water,...
Nov. 26, 2014 06:00 PM EST Reads: 898
"Matrix is an ambitious open standard and implementation that's set up to break down the fragmentation problems that exist in IP messaging and VoIP communication," explained John Woolf, Technical Evangelist at Matrix, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Nov. 26, 2014 05:45 PM EST Reads: 852
Want to enable self-service provisioning of application environments in minutes that mirror production? Can you automatically provide rich data with code-level detail back to the developers when issues occur in production? In his session at DevOps Summit, David Tesar, Microsoft Technical Evangelist on Microsoft Azure and DevOps, will discuss how to accomplish this and more utilizing technologies such as Microsoft Azure, Visual Studio online, and Application Insights in this demo-heavy session.
Nov. 26, 2014 04:45 PM EST Reads: 509
When an enterprise builds a hybrid IaaS cloud connecting its data center to one or more public clouds, security is often a major topic along with the other challenges involved. Security is closely intertwined with the networking choices made for the hybrid cloud. Traditional networking approaches for building a hybrid cloud try to kludge together the enterprise infrastructure with the public cloud. Consequently this approach requires risky, deep "surgery" including changes to firewalls, subnets...
Nov. 26, 2014 04:45 PM EST Reads: 514
DevOps is all about agility. However, you don't want to be on a high-speed bus to nowhere. The right DevOps approach controls velocity with a tight feedback loop that not only consists of operational data but also incorporates business context. With a business context in the decision making, the right business priorities are incorporated, which results in a higher value creation. In his session at DevOps Summit, Todd Rader, Solutions Architect at AppDynamics, discussed key monitoring techniques...
Nov. 26, 2014 04:45 PM EST Reads: 541
The Internet of Things will greatly expand the opportunities for data collection and new business models driven off of that data. In her session at @ThingsExpo, Esmeralda Swartz, CMO of MetraTech, discussed how for this to be effective you not only need to have infrastructure and operational models capable of utilizing this new phenomenon, but increasingly service providers will need to convince a skeptical public to participate. Get ready to show them the money!
Nov. 26, 2014 04:00 PM EST Reads: 952
One of the biggest challenges when developing connected devices is identifying user value and delivering it through successful user experiences. In his session at Internet of @ThingsExpo, Mike Kuniavsky, Principal Scientist, Innovation Services at PARC, described an IoT-specific approach to user experience design that combines approaches from interaction design, industrial design and service design to create experiences that go beyond simple connected gadgets to create lasting, multi-device exp...
Nov. 26, 2014 03:45 PM EST Reads: 922
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect...
Nov. 26, 2014 02:00 PM EST Reads: 1,448
High-performing enterprise Software Quality Assurance (SQA) teams validate systems that are ready for use - getting most actively involved as components integrate and form complete systems. These teams catch and report on defects, making sure the customer gets the best software possible. SQA teams have leveraged automation and virtualization to execute more thorough testing in less time - bringing Dev and Ops together, ensuring production readiness. Does the emergence of DevOps mean the end of E...
Nov. 25, 2014 11:30 PM EST Reads: 1,108
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series dat...
Nov. 25, 2014 09:30 PM EST Reads: 1,246
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using ...
Nov. 25, 2014 09:30 PM EST Reads: 1,196