Click here to close now.

SYS-CON MEDIA Authors: Carmen Gonzalez, Kevin Jackson, Peter Silva, Greg Wind, Glenn Rossman

News Feed Item

Denison Intersects High Grade Uranium at a New Target Area at Wheeler River

TORONTO, ONTARIO -- (Marketwired) -- 03/20/14 -- Denison Mines Corp. (TSX: DML)(NYSE MKT: DNN) ("Denison" or the "Company") is pleased to announce that high grade, basement hosted uranium mineralization averaging 9.7% eU3O8 over 4.6 metres has been intersected in drill hole WR-556 at the K North target area 3.0 kilometres northwest of the Phoenix deposit at Wheeler River. This new zone of mineralization has been named the Gryphon zone.

Gryphon Zone

Drill hole WR-556 targeted the down-dip extension of weak mineralization in two historic drill holes in the K North area. WR-556 intersected a basement wedge that has been faulted up into the sandstone, and then encountered a large interval of graphitic basement, within which is a zone of alteration and mineralization 140 metres down-dip of the old drill holes. From down-hole total gamma probe results, the high grade portion of the mineralization averages 9.7% eU3O8 over 4.6 meters, using a cut-off grade of 1% eU3O8. The high grade mineralization is flanked by lower grade mineralization on both sides, and the entire interval averages 3.7% eU3O8 over 12.6 metres, using a cut-off grade of 0.1% eU3O8. Figure 1 shows the location of WR-556 relative to the Phoenix deposit and other target areas at Wheeler River.

To view Figure 1, please visit the following link: http://media3.marketwire.com/docs/934493-F1.pdf.

Gryphon Zone Discovery Intersection


Hole-ID             From (m)          To (m)      Length (m)     eU3O8(1)(%)
----------------------------------------------------------------------------
WR-556(2)              691.0           703.6            12.6             3.7
(includes)(3)          696.1           700.7             4.6             9.7
----------------------------------------------------------------------------
Notes:

1.  eU3O8 is radiometric equivalent uranium from a total gamma down-hole
    probe
2.  Intersection interval is composited above a cut-off grade of 0.1% eU3O8
3.  Intersection interval is composited above a cut-off grade of 1.0% eU3O8

The mineralization at the Gryphon zone is approximately 200 metres beneath the sub-Athabasca unconformity and is open in both strike directions and down-dip. As WR-556 is a vertical drill hole and the mineralization is expected to dip moderately, the true thickness is approximately 70% of the intersection length.

The Wheeler River property lies between the McArthur River Mine and Key Lake mill complex in the Athabasca Basin in northern Saskatchewan. Denison is the operator and holds a 60% interest in the project. Cameco Corporation holds a 30% interest and JCU (Canada) Exploration Company, Limited holds the remaining 10% interest.

Qualified Person

The disclosure of a scientific or technical nature contained in this news release was prepared by Steve Blower, P.Geo., Denison's Vice President, Exploration, who is a Qualified Person in accordance with the requirements of NI 43-101. For a description of the quality assurance program and quality control measures applied by Denison, please see Denison's Annual Information Form dated March 14, 2014 filed under the Company's profile on SEDAR at www.sedar.com.

About Denison

Denison is a uranium exploration and development company with interests in exploration and development projects in Canada, Zambia, Namibia, and Mongolia. Including the high grade Phoenix deposits, located on its 60% owned Wheeler project, Denison's exploration project portfolio includes 43 projects and totals approximately 584,000 hectares in the Eastern Athabasca Basin region of Saskatchewan. Denison's interests in Saskatchewan also include a 22.5% ownership interest in the McClean Lake joint venture, which includes several uranium deposits and the McClean Lake uranium mill, one of the world's largest uranium processing facilities, plus a 25.17% interest in the Midwest deposit and a 60% interest in the J Zone deposit on the Waterbury property. Both the Midwest and J Zone deposits are located within 20 kilometres of the McClean Lake mill. Internationally, Denison owns 100% of the conventional heap leach Mutanga project in Zambia, 100% of the uranium/copper/silver Falea project in Mali, a 90% interest in the Dome project in Namibia, and an 85% interest in the in-situ recovery projects held by the Gurvan Saihan joint venture ("GSJV") in Mongolia.

Denison is engaged in mine decommissioning and environmental services through its DES division and is the manager of UPC, a publicly traded company which invests in uranium oxide and uranium hexafluoride.

Cautionary Statements

Certain information contained in this press release constitutes "forward-looking information", within the meaning of the United States Private Securities Litigation Reform Act of 1995 and similar Canadian legislation concerning the business, operations and financial performance and condition of Denison.

Generally, these forward-looking statements can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur", "be achieved" or "has the potential to".

Forward-looking statements are based on the opinions and estimates of management as of the date such statements are made, and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Denison to be materially different from those expressed or implied by such forward-looking statements. Denison believes that the expectations reflected in this forward-looking information are reasonable but no assurance can be given that these expectations will prove to be correct and such forward-looking information included in this press release should not be unduly relied upon. This information speaks only as of the date of this press release. In particular, this press release may contain forward-looking information pertaining to the following: the likelihood of completing and benefits to be derived from corporate transactions; the estimates of Denison's mineral reserves and mineral resources; expectations regarding the toll milling of Cigar Lake ores; capital expenditure programs, estimated exploration and development expenditures and reclamation costs; expectations of market prices and costs; supply and demand for uranium ("U3O8"); possible impacts of litigation and regulatory actions on Denison; exploration, development and expansion plans and objectives; expectations regarding adding to its mineral reserves and resources through acquisitions and exploration; and receipt of regulatory approvals, permits and licenses under governmental regulatory regimes.

There can be no assurance that such statements will prove to be accurate, as Denison's actual results and future events could differ materially from those anticipated in this forward-looking information as a result of the factors discussed in or referred to under the heading "Risk Factors" in Denison's Annual Information Form dated March 14, 2014 available at http://www.sedar.com, and in its Form 40-F available at http://www.sec.gov/edgar.shtml.

Accordingly, readers should not place undue reliance on forward-looking statements. These factors are not, and should not be construed as being, exhaustive. Statements relating to "mineral reserves" or "mineral resources" are deemed to be forward-looking information, as they involve the implied assessment, based on certain estimates and assumptions that the mineral reserves and mineral resources described can be profitably produced in the future. The forward-looking information contained in this press release is expressly qualified by this cautionary statement. Denison does not undertake any obligation to publicly update or revise any forward-looking information after the date of this press release to conform such information to actual results or to changes in Denison's expectations except as otherwise required by applicable legislation.

Contacts:
Denison Mines Corp.
Ron Hochstein
President and Chief Executive Officer
(416) 979-1991 ext 232

Denison Mines Corp.
Sophia Shane
Investor Relations
(604) 689-7842
www.denisonmines.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
WSM International is launching a DevOps services division that offers assessment, consulting and implementation to large enterprises and organizations with complex infrastructures. This is the first independent services company to create a dedicated practice to help organizations looking to transition to the DevOps model. The concept of DevOps is to blend information technology (IT) software development with operations to optimize the computing infrastructure according to the specific needs of ...
SYS-CON Events announced today that Cisco, the worldwide leader in IT that transforms how people connect, communicate and collaborate, has been named “Gold Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Cisco makes amazing things happen by connecting the unconnected. Cisco has shaped the future of the Internet by becoming the worldwide leader in transforming how people connect, communicate and collaborat...
The WebRTC Summit 2014 New York, to be held June 9-11, 2015, at the Javits Center in New York, NY, announces that its Call for Papers is open. Topics include all aspects of improving IT delivery by eliminating waste through automated business models leveraging cloud technologies. WebRTC Summit is co-located with 16th International Cloud Expo, @ThingsExpo, Big Data Expo, and DevOps Summit.
Temasys has announced senior management additions to its team. Joining are David Holloway as Vice President of Commercial and Nadine Yap as Vice President of Product. Over the past 12 months Temasys has doubled in size as it adds new customers and expands the development of its Skylink platform. Skylink leads the charge to move WebRTC, traditionally seen as a desktop, browser based technology, to become a ubiquitous web communications technology on web and mobile, as well as Internet of Things...
SYS-CON Events announced today that robomq.io will exhibit at SYS-CON's @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. robomq.io is an interoperable and composable platform that connects any device to any application. It helps systems integrators and the solution providers build new and innovative products and service for industries requiring monitoring or intelligence from devices and sensors.
Hosted PaaS providers have given independent developers and startups huge advantages in efficiency and reduced time-to-market over their more process-bound counterparts in enterprises. Software frameworks are now available that allow enterprise IT departments to provide these same advantages for developers in their own organization. In his workshop session at DevOps Summit, Troy Topnik, ActiveState’s Technical Product Manager, will show how on-prem or cloud-hosted Private PaaS can enable organ...
DevOps tasked with driving success in the cloud need a solution to efficiently leverage multiple clouds while avoiding cloud lock-in. Flexiant today announces the commercial availability of Flexiant Concerto. With Flexiant Concerto, DevOps have cloud freedom to automate the build, deployment and operations of applications consistently across multiple clouds. Concerto is available through four disruptive pricing models aimed to deliver multi-cloud at a price point everyone can afford.
Today, IT is not just a cost center. IT is an enabler and driver of business. With the emergence of the hybrid cloud paradigm, IT now has increasingly more capabilities to create new strategic opportunities for a business. Hybrid cloud allows an organization to utilize multi-tenant public clouds, dedicated private clouds, bare metal hosting, and the associated support and services for the right use cases through an on-demand, XaaS model. This model of IT creates tremendous opportunities for busi...
Docker is an excellent platform for organizations interested in running microservices. It offers portability and consistency between development and production environments, quick provisioning times, and a simple way to isolate services. In his session at DevOps Summit at 16th Cloud Expo, Shannon Williams, co-founder of Rancher Labs, will walk through these and other benefits of using Docker to run microservices, and provide an overview of RancherOS, a minimalist distribution of Linux designed...
Business as usual for IT is evolving into a “Make or Buy” decision on a service-by-service conversation with input from the LOBs. How does your organization move forward with cloud? In his general session at 16th Cloud Expo, Paul Maravei, Regional Sales Manager, Hybrid Cloud and Managed Services at Cisco, discusses how Cisco and its partners offer a market-leading portfolio and ecosystem of cloud infrastructure and application services that allow you to uniquely and securely combine cloud busi...
Businesses are looking to empower employees and departments to do more, go faster, and streamline their processes. For all workers – but mobile workers especially – utilizing the cloud to reconnect documents and improve processes without destructing existing workflows can have a dramatic impact on productivity. In his session at 16th Cloud Expo, Mark Grilli, vice president of Acrobat Solutions marketing at Adobe Systems Incorporated, will outline new ways that the cloud is changing the way peo...
Wearable technology was dominant at this year’s International Consumer Electronics Show (CES) , and MWC was no exception to this trend. New versions of favorites, such as the Samsung Gear (three new products were released: the Gear 2, the Gear 2 Neo and the Gear Fit), shared the limelight with new wearables like Pebble Time Steel (the new premium version of the company’s previously released smartwatch) and the LG Watch Urbane. The most dramatic difference at MWC was an emphasis on presenting we...
SYS-CON Events announced today that Vitria Technology, Inc. will exhibit at SYS-CON’s @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Vitria will showcase the company’s new IoT Analytics Platform through live demonstrations at booth #330. Vitria’s IoT Analytics Platform, fully integrated and powered by an operational intelligence engine, enables customers to rapidly build and operationalize advanced analytics to deliver timely business outcomes ...
Are your applications getting in the way of your business strategy? It’s time to rethink your IT approach. In his session at 16th Cloud Expo, Madhukar Kumar, Vice President, Product Management at Liaison Technologies, will discuss a new data-centric approach to IT that allows your data, not applications, to inform business strategy. By moving away from an application-centric IT model where data integration and analysis are subservient to the constraints of applications, your organization will b...
SYS-CON Events announced today that MangoApps will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY., and the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. MangoApps provides private all-in-one social intranets allowing workers to securely collaborate from anywhere in the world and from any device. Social, mobile, and eas...