SYS-CON MEDIA Authors: Greg Ness, Sean Houghton, Glenn Rossman, Ignacio M. Llorente, Xenia von Wedel

News Feed Item

Ainsworth Announces 2013 Fourth Quarter and Year End Results

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 03/25/14 -- Ainsworth Lumber Co. Ltd. (TSX: ANS) today announced its financial results for the fourth quarter and year ended December 31, 2013.

2013 Highlights:


--  Generated annual adjusted EBITDA of $148.9 million versus $105.5 million
    in 2012
--  Continued strong export growth
--  Restarted the High Level mill in September
--  With improved liquidity, exercised optional redemption of U.S.$35
    million of our senior secured notes
--  Pending acquisition by LP targeted to close during the second quarter of
    2014

Ainsworth President and Chief Executive Officer, Jim Lake said, "Ainsworth benefited in 2013 from the continued North American housing market recovery, although OSB prices did moderate in the second half of the year. Notwithstanding some near-term challenges in 2014 including transportation issues and extreme weather that have impacted OSB shipments and demand, the overall outlook remains positive with the consensus forecast for U.S. housing starts calling for further recovery in 2014. I am also pleased to report that our export markets exhibited strong growth, particularly in Japan."

LP Acquisition of Ainsworth

On September 4, 2013, we entered into an agreement (the "Arrangement Agreement") with Louisiana-Pacific Corporation ("LP") under which LP will acquire all of the outstanding common shares of Ainsworth for $1.94 in cash plus 0.114 LP common shares per each Ainsworth common share, on a fully pro-rated basis.

The transaction, which will be carried out by way of a court-approved plan of arrangement, was approved by approximately 99.9% of the votes cast by the shareholders of the Company at a special meeting that took place on October 29, 2013, and subsequently received approval from the Supreme Court of British Columbia on October 31, 2013. Both Ainsworth and LP continue to work with the Canadian Competition Bureau and the U.S. Department of Justice as they conduct their regulatory reviews of the transaction. Subject to obtaining required regulatory approvals and the satisfaction or waiver of other conditions of the Arrangement Agreement, Ainsworth currently expects the acquisition to close during the second quarter of 2014.

Further information about the Arrangement Agreement is set out in Ainsworth's management proxy circular dated September 24, 2013, which is available under Ainsworth's profile on www.sedar.com.

Financial Results

Sales of $104.4 million in the fourth quarter of 2013 were $13.5 million lower than sales of $117.9 million for the same period in 2012. The decrease in sales was mainly due to an 18% decrease in realized pricing. The impact of the U.S. benchmark declines on our realized pricing was moderated by the effect of a weaker Canadian dollar relative to the fourth quarter of 2012 combined with stronger export pricing. Notwithstanding transportation issues that restricted shipments in the fourth quarter, our sales volumes increased 2.8% due to the onset of production at High Level.

Adjusted EBITDA was $11.3 million in the fourth quarter of 2013 compared to $42.0 million in the same period of 2012, largely as a result of lower realized pricing. Net loss from continuing operations in the fourth quarter of 2013 was $10.6 million compared to net income of $6.7 million in the fourth quarter of 2012. The $17.3 million decrease was due to the reduction in gross profit and increased selling and administration expense, partially offset by a reduction in finance expense, and fluctuations in non-cash accounting gains and losses and income tax expense.

Sales of $488.0 million in 2013 were $78.9 million higher than sales of $409.1 million in 2012. This increase was mainly due to a 22% increase in realized pricing for the year. The impact of the U.S. benchmark increases on our realized pricing was enhanced by the effect of a weaker Canadian dollar in 2013 on average relative to 2012 combined with stronger export pricing. Partially offsetting the price increases, there was a 0.7% decline in sales volumes as additional production from High Level was more than offset by maintenance downtime at our various mills and transportation issues toward the end of 2013.

Adjusted EBITDA for the year was $148.9 million in 2013 compared to $105.5 million in 2012, largely as a result of higher realized pricing. Net income from continuing operations was $39.4 million in 2013 compared to $28.4 million in 2012, representing an increase of $11.0 million. The increase included an increase in gross profit and a decrease in finance expense, partially offset by increased costs of curtailed operations, increased selling and administration expense, and fluctuations in non-cash accounting gains and losses and income tax expense.

Margins

Adjusted EBITDA margin on sales for the fourth quarter of 2013 was 10.8% compared to 35.6% in the fourth quarter of 2012. For the full year, adjusted EBITDA margin on sales was 30.5% in 2013 compared to 25.8% in 2012.

Benchmark OSB pricing remained stable during the fourth quarter of 2013, although down from the previous quarter and the same period last year, with the North Central price for 7/16" OSB averaging U.S.$245 per msf (a decrease of 26% compared to the fourth quarter of 2012, and a 3% decrease compared to prior quarter). The Western Canadian price for 7/16" OSB averaged U.S.$219 per msf in the fourth quarter of 2013 (a decrease of 34% compared to the fourth quarter of 2012, and a 5% decrease compared to prior quarter).

Selected financial information is presented in the table below. The full financial report is available to be viewed at the following link: http://media3.marketwire.com/docs/ans0325report.pdf.


Selected Financial Information
In millions of Canadian dollars, except per share data

----------------------------------------------------------------------------
----------------------------------------------------------------------------
                                  Three months ended   Year ended December
                                     December 31                31
                                      2013       2012       2013       2012
----------------------------------------------------------------------------
----------------------------------------------------------------------------

Sales                            $   104.4  $   117.9  $   488.0  $   409.1
Cost of products sold                 89.4       72.1      323.5      287.6
Net income from continuing
 operations                          (10.6)       6.7       39.4       28.4
Net income                           (10.7)      32.5       38.8       28.2
Adjusted EBITDA (1)                   11.3       42.0      148.9      105.5
Adjusted EBITDA margin (2)            10.8%      35.6%      30.5%      25.8%
----------------------------------------------------------------------------
Basic and diluted earnings per share:
 Net income from continuing
  operations                         (0.04)      0.06       0.16       0.28
 Net income                          (0.04)      0.06       0.16       0.28
 Weighted average common shares
  outstanding (3)                    240.9      106.9      240.9      102.3
----------------------------------------------------------------------------
(1) Adjusted EBITDA, a non-IFRS financial measure, is defined as net income
 (loss) from continuing operations before amortization, gain on disposal of
 property, plant and equipment, cost of curtailed operations, stock option
 expense, finance expense, foreign exchange (gain) loss on long-term debt,
 other foreign exchange loss (gain), interest income earned on investments,
 income tax expense (recovery), and non-recurring items. Adjusted EBITDA for
 2012 has been restated to reflect an increase in pension expense related to
 the adoption of the amended IAS 19 - Employee Benefits, and to exclude
 interest income earned on investments.
(2) Adjusted EBITDA margin, a non-IFRS financial measure, is defined as
 adjusted EBITDA divided by sales.
 (3)  240,906,309 common shares were outstanding on December 31, 2013.

Liquidity

At December 31, 2013, Ainsworth's available liquidity, consisting of cash and cash equivalents, was $137.4 million, an improvement of $30.6 million since December 31, 2012 resulting from our stronger operating results, partially offset by debt repayments and capital expenditures.

Outlook

The overall long-term outlook remains positive for the U.S. housing market. Additionally, we continue to experience growth in our export markets, including Japan and China. As a result, we remain confident that the market will require additional supply in the years ahead. The restart of our High Level mill will allow us to meet the growing requirements of our existing customer base in North America and Asia as well as service new market segments.

Conference Call Information

Ainsworth will hold a conference call on Wednesday, March 26, 2014 at 10:00 a.m. PT (1:00 p.m. ET). The dial-in phone number is 1-800-319-4610 from inside the USA or Canada, and +1-604-638-5340 from outside of the USA and Canada. To access the replay line, dial 1-800-319-6413, or +1-604-638-9010, Reservation 4176#. This recording will be available until the end of the day on April 2, 2014.

The financial results are based on International Financial Reporting Standards. Investors, analysts and other interested parties can access Ainsworth's Financial Statements, Management's Discussion and Analysis as well as the Shareholders' Letter and Supplemental Information on Ainsworth's website under the Investors / Financial Reports section at www.ainsworthengineered.com.

Forward-Looking Statements

Forward-looking information provided in this news release relating to the Company's expectations regarding OSB demand and pricing and the Company's future prospects and financial position are forward-looking information pursuant to National Instrument 51-102 promulgated by the Canadian Securities Administrators. The Company believes that expectations reflected in such information are reasonable, but no assurance is given that such expectations will be correct. Forward-looking information is based on the Company's beliefs and assumptions based on information available at the time the assumption was made and on management's experience and perception of historical trends, current conditions and expected further developments as well as other factors deemed appropriate in the circumstances. Investors are cautioned that there are risks and uncertainties related to such forward-looking information and actual results may vary. Important factors that could cause actual results to differ materially from those expressed or implied by such forward looking information include, without limitation, factors detailed from time to time in the Company's periodic reports filed with the Canadian Securities Administrators and other regulatory authorities. The forward-looking information is made as of the date of this news release and the Company assumes no obligation to update or revise them to reflect new events or circumstances, except as explicitly required by securities laws.

About Ainsworth

Ainsworth Lumber Co. Ltd. is a leading manufacturer and marketer of oriented strand board ("OSB") with a focus on value-added specialty products for markets in North America and Asia. Ainsworth's four OSB manufacturing mills, located in Alberta, British Columbia and Ontario, have a combined annual capacity of 2.5 billion square feet (3/8-inch basis). Ainsworth is a publicly traded company listed on the Toronto Stock Exchange under the symbol ANS.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Lori MacVittie is responsible for education and evangelism of application services available across F5's entire product suite. Her role includes authorship of technical materials and participation in a number of community-based forums and industry standards organizations, among other efforts. MacVittie has extensive programming experience as an application architect, as well as network and systems development and administration expertise. Prior to joining F5, MacVittie was an award-winning Senio...
15th Cloud Expo, which took place Nov. 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA, expanded the conference content of @ThingsExpo, Big Data Expo, and DevOps Summit to include two developer events. IBM held a Bluemix Developer Playground on November 5 and ElasticBox held a Hackathon on November 6. Both events took place on the expo floor. The Bluemix Developer Playground, for developers of all levels, highlighted the ease of use of Bluemix, its services and functionalit...
SYS-CON Media announced today that Skytap blog on "DevOps Journal" exceeded 84,000 story reads. DevOps Journal is focused on this critical enterprise IT topic in the world of cloud computing. DevOps Journal brings valuable information to DevOps professionals who are transforming the way enterprise IT is done. Noel Wurst is the managing content editor at Skytap. Skytap provides SaaS-based dev/test environments to the enterprise. Skytap solution removes the inefficiencies and constraints that comp...
SYS-CON Events announced today that Gridstore™, the leader in hyper-converged infrastructure purpose-built to optimize Microsoft workloads, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Gridstore™ is the leader in hyper-converged infrastructure purpose-built for Microsoft workloads and designed to accelerate applications in virtualized environments. Gridstore’s hyper-converged infrastructure is the ...
In her General Session at 15th Cloud Expo, Anne Plese, Senior Consultant, Cloud Product Marketing, at Verizon Enterprise, focused on finding the right mix of renting vs. buying Oracle capacity to scale to meet business demands, and offer validated Oracle database TCO models for Oracle development and testing environments. Anne Plese is a marketing and technology enthusiast/realist with over 19+ years in high tech. At Verizon Enterprise, she focuses on driving growth for the Verizon Cloud platfo...
The 3rd International @ThingsExpo, co-located with the 16th International Cloud Expo - to be held June 9-11, 2015, at the Javits Center in New York City, NY - announces that it is now accepting Keynote Proposals. The Internet of Things (IoT) is the most profound change in personal and enterprise IT since the creation of the Worldwide Web more than 20 years ago. All major researchers estimate there will be tens of billions devices - computers, smartphones, tablets, and sensors - connected to th...
"There is a natural synchronization between the business models, the IoT is there to support ,” explained Brendan O'Brien, Co-founder and Chief Architect of Aria Systems, in this SYS-CON.tv interview at the 15th International Cloud Expo®, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
The Internet of Things promises to transform businesses (and lives), but navigating the business and technical path to success can be difficult to understand. In his session at @ThingsExpo, Sean Lorenz, Technical Product Manager for Xively at LogMeIn, demonstrated how to approach creating broadly successful connected customer solutions using real world business transformation studies including New England BioLabs and more.
The Internet of Things will greatly expand the opportunities for data collection and new business models driven off of that data. In her session at @ThingsExpo, Esmeralda Swartz, CMO of MetraTech, discussed how for this to be effective you not only need to have infrastructure and operational models capable of utilizing this new phenomenon, but increasingly service providers will need to convince a skeptical public to participate. Get ready to show them the money!
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happe...
WebRTC defines no default signaling protocol, causing fragmentation between WebRTC silos. SIP and XMPP provide possibilities, but come with considerable complexity and are not designed for use in a web environment. In his session at @ThingsExpo, Matthew Hodgson, technical co-founder of the Matrix.org, discussed how Matrix is a new non-profit Open Source Project that defines both a new HTTP-based standard for VoIP & IM signaling and provides reference implementations.
"ElasticBox is an enterprise company that makes it very easy for developers and IT ops to collaborate to develop, build and deploy applications on any cloud - private, public or hybrid," stated Monish Sharma, VP of Customer Success at ElasticBox, in this SYS-CON.tv interview at DevOps Summit, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
The definition of IoT is not new, in fact it’s been around for over a decade. What has changed is the public's awareness that the technology we use on a daily basis has caught up on the vision of an always on, always connected world. If you look into the details of what comprises the IoT, you’ll see that it includes everything from cloud computing, Big Data analytics, “Things,” Web communication, applications, network, storage, etc. It is essentially including everything connected online from ha...
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series dat...
An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and asse...