|By PR Newswire||
|April 8, 2014 10:38 AM EDT||
LONDON, April 8, 2014 /PRNewswire/ --
Prices of nickel breached US$16,500/t last Friday, exceeding the price level recorded 12 months previously. Strong performance of the nickel price is forecast to continue as a result of reduced supply of lateritic ore following the Indonesian ban on raw material exports. According to Roskill, while industry analysts, INSG meetings and Metal Bulletin conferences have predominantly focused on the impact of the ban on the stainless steel industry, non-stainless uses of nickel such as plating and nickel alloys may be more at risk of a market upheaval.
Production of nickel pig iron (NPI)
The direct effect of the nickel ban has been to cut off the Chinese NPI industry from its primary source of feedstock - the high-grade lateritic ore supplied by Indonesian mines. Roskill estimates that, in 2013, Chinese production of nickel pig iron was in the range of 460-500kt Ni. Around 80% of this is believed to have been produced in modern rotary kiln electric furnaces (RKEF), the preferred feedstock for which is ore with a minimum nickel content of 1.5%.
With nickel stocks estimated to have exceeded six to eight months of supply at the time of the ban's implementation and continued shipments of ore coming from the Philippines, NPI production in 2014 may be only slightly below 2013 levels. With further stockpiles of NPI held by producers and end users alike, growth in stainless steel output in China may slow down, but is unlikely to decline in the near term.
As for the prospects of NPI production in China beyond 2014, the main alternative source of lateritic ore is the Philippines. Its mine production has rivalled that of Indonesia in terms of nickel content and output is forecast to increase at a rate of 15-20%py. Although impressive by any standard, such growth would be insufficient to fully cover the gap left by Indonesia, even disregarding the lower grade of the ore mined in the Philippines.
Larger resources of lateritic ore are found in Australia, but at an average grade of only 0.75% Ni, while higher grade resources in New Caledonia are mostly captive to existing operations. The other two countries with sizeable resources are Cuba and Brazil, believed to contain over a billion tonnes of nickel resources each. But, even assuming that such countries would permit the export of large quantities of unprocessed ore, shipment of this material could add an estimated US$1,700/t to the production cost of NPI, rendering domestic beneficiation a more attractive proposition.
NPI produced in Indonesia is unlikely to fully replace Chinese production. As of November 2013, the Indonesian government had announced receipt of 89 proposals, of which 50 are believed to remain on the table, around 10-15 of which are believed to be in permitting stage, and around three of which have reportedly broken ground.
The possibility of relocating obsolete blast furnace or RKEF plants from China could reduce construction time, but several of the smelters are likely to require the construction of dedicated power plants, adding both capital expense and time needed for completion. Capital expenditure and energy costs are expected to increase for these operations, but are partially offset by lower transport costs, and even at a 10-20% cost increase, forecast increases in the nickel price are sufficient to render such operations economic.
Taking these factors into account, Roskill suggests that NPI production in Indonesia could reach 170-230ktpy Ni by 2018, alleviating but not fully filling the gap left by reduced ore exports.
Stainless steel producers facing strategic decisions
Despite the expected decline in NPI supply, Roskill points out that stainless steel mills have the luxury of being able to rely on a wide range of feedstocks. One alternative available to Chinese steel mills is to step up their reliance on metal scrap to complement their melting mix. As of 2013, China's external scrap ratio stood at 17%, compared to a world average of 45%. Prior to the Indonesian nickel ban, Roskill forecast the scrap ratio to increase to 21% by 2018, a figure that it says it will revise upwards in the wake of expected stronger demand for secondary sources of nickel following Indonesia's export ban.
A second alternative is the use of Class I nickel, in the form of nickel cathode, or briquettes, typically grading above 99.8% purity. Such material typically accounts for only 35% of total nickel consumption in stainless sectors, as the premium paid for the refining process renders this type of feedstock relatively costly compared to lower-grade materials such as NPI or ferro-nickel. But, with reduced availability of these latter materials, stainless steel mills may increasingly turn to higher-grade material - the type of material of which over 280kt of stocks remain in LME warehouses.
A third alternative is the substitution of nickel-bearing austenitic grades of stainless steel (300-series) by ferritic and martensitic grades (200 and 400-series). From 2003 to 2008, the share of austenitic grades fell from 70.6% to 56.5%, as a result of substitution following the high price of nickel. While the percentage of steels accounted for by austenitic grades has stabilised in recent years, any renewed surge in prices could provide a new push towards substitution - both within stainless steels, and between stainless steels and competing materials.
Non-stainless end users to feel the crunch
This abundance of choice in terms of feedstock is dramatically different in non-stainless industries. The largest of these sectors include plating (8.3% of total primary nickel consumption), superalloys and other nickel alloys (4.2% and 7.2% respectively), as well as other alloy steels and a variety of chemical applications - including batteries.
These sectors generally favour - or, indeed, are critically dependent on - high-grade material such as nickel powder, pellets, briquettes, and cathode. Intuitively, given the lack of their reliance on ferro-nickel or NPI, one might assume these sectors to be relatively insulated from the effects of the Indonesian nickel ban, but in fact the opposite may be true, says Thomas Höhne-Sparborth, Roskill's senior nickel analyst.
In the past, these sectors accounted for the minority share of nickel consumption, but for the majority of consumption of Class I nickel. In 2013, Roskill estimates non-stainless consumers of nickel accounted for 53% of consumption of high-grade nickel products. With stainless steel producers expected to turn to scrap and nickel cathode to offset decreased availability of NPI, purchasing managers looking for high-grade material may find themselves competing with a large contingent of Chinese stainless steel mills, on the market for alternative nickel feedstock, increasing the share of Class I consumption accounted for by the stainless sector and turning the market for Class I nickel into a "seller's market".
Uncertainty and volatility
Taking these dynamics into account, to 2018, under the assumption of the Indonesian ban on raw material exports remaining in place, Roskill forecasts nickel prices to increase to US$24,350/t. But, with uncertainty over smelter projects in Indonesia, the state of the NPI industry in China, the possibility of demand destruction through substitution, and the large but unknown share of stocks of nickel held by investors, increased volatility, speculation and price spikes appear likely.
For a more in-depth analysis of the nickel market, its sources of supply, its end use sectors, and Roskill's outlook to 2018, see the latest edition of Roskill's Nickel Market Outlook.
Roskill's new Nickel: Market Outlook to 2018 contains full estimates for 2013, profiles on major producers and projects, an assessment of key market and technological trends, a discussion of the Indonesian export ban, and an outlook for supply, demand and prices to 2018. This latest edition from Roskill Information Services Ltd, 54 Russell Road, London SW19 1QL ENGLAND can be order by Tel: +44-20-8417-0087, Fax +44-20-8417-1308, Email: [email protected] or Roskill's Website:http://www.roskill.com/nickel
Note to editors
Roskill Information Services Ltd. of London, UK is a leading provider of multi-client and bespoke market research services to the minerals and metals industry.
The new Nickel report contains 498 pages, 310 tables and 102 figures plus an appendix of international trade statistics. It provides a detailed review of the industry, with subsections on the activities of the leading producing companies. It also analyses consumption, trade and prices.
For further information on this report, please contact Patrick Stratton, [email protected] or +44-20-8417-0087.
Operational Hadoop and the Lambda Architecture for Streaming Data Apache Hadoop is emerging as a distributed platform for handling large and fast incoming streams of data. Predictive maintenance, supply chain optimization, and Internet-of-Things analysis are examples where Hadoop provides the scalable storage, processing, and analytics platform to gain meaningful insights from granular data that is typically only valuable from a large-scale, aggregate view. One architecture useful for capturing...
Mar. 1, 2015 02:00 PM EST Reads: 1,267
SYS-CON Events announced today that Vitria Technology, Inc. will exhibit at SYS-CON’s @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Vitria will showcase the company’s new IoT Analytics Platform through live demonstrations at booth #330. Vitria’s IoT Analytics Platform, fully integrated and powered by an operational intelligence engine, enables customers to rapidly build and operationalize advanced analytics to deliver timely business outcomes ...
Mar. 1, 2015 01:45 PM EST Reads: 1,175
DevOps is about increasing efficiency, but nothing is more inefficient than building the same application twice. However, this is a routine occurrence with enterprise applications that need both a rich desktop web interface and strong mobile support. With recent technological advances from Isomorphic Software and others, it is now feasible to create a rich desktop and tuned mobile experience with a single codebase, without compromising performance or usability.
Mar. 1, 2015 01:15 PM EST Reads: 1,065
SYS-CON Events announced today Arista Networks will exhibit at SYS-CON's DevOps Summit 2015 New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. Arista Networks was founded to deliver software-driven cloud networking solutions for large data center and computing environments. Arista’s award-winning 10/40/100GbE switches redefine scalability, robustness, and price-performance, with over 3,000 customers and more than three million cloud networking ports depl...
Mar. 1, 2015 01:00 PM EST Reads: 1,533
Application metrics, logs, and business KPIs are a goldmine. It’s easy to get started with the ELK stack (Elasticsearch, Logstash and Kibana) – you can see lots of people coming up with impressive dashboards, in less than a day, with no previous experience. Going from proof-of-concept to production tends to be a bit more difficult, unfortunately, and it tends to gobble up our attention, time, and money. In his session at DevOps Summit, Otis Gospodnetić, co-author of Lucene in Action and founder...
Mar. 1, 2015 01:00 PM EST Reads: 1,289
The speed of software changes in growing and large scale rapid-paced DevOps environments presents a challenge for continuous testing. Many organizations struggle to get this right. Practices that work for small scale continuous testing may not be sufficient as the requirements grow. In his session at DevOps Summit, Marc Hornbeek, Sr. Solutions Architect of DevOps continuous test solutions at Spirent Communications, will explain the best practices of continuous testing at high scale, which is r...
Mar. 1, 2015 01:00 PM EST Reads: 1,143
Thanks to Docker, it becomes very easy to leverage containers to build, ship, and run any Linux application on any kind of infrastructure. Docker is particularly helpful for microservice architectures because their successful implementation relies on a fast, efficient deployment mechanism – which is precisely one of the features of Docker. Microservice architectures are therefore becoming more popular, and are increasingly seen as an interesting option even for smaller projects, instead of bein...
Mar. 1, 2015 12:00 PM EST Reads: 2,532
Security can create serious friction for DevOps processes. We've come up with an approach to alleviate the friction and provide security value to DevOps teams. In her session at DevOps Summit, Shannon Lietz, Senior Manager of DevSecOps at Intuit, will discuss how DevSecOps got started and how it has evolved. Shannon Lietz has over two decades of experience pursuing next generation security solutions. She is currently the DevSecOps Leader for Intuit where she is responsible for setting and driv...
Mar. 1, 2015 12:00 PM EST Reads: 2,347
The explosion of connected devices / sensors is creating an ever-expanding set of new and valuable data. In parallel the emerging capability of Big Data technologies to store, access, analyze, and react to this data is producing changes in business models under the umbrella of the Internet of Things (IoT). In particular within the Insurance industry, IoT appears positioned to enable deep changes by altering relationships between insurers, distributors, and the insured. In his session at @Things...
Mar. 1, 2015 12:00 PM EST Reads: 1,215
SYS-CON Events announced today that Open Data Centers (ODC), a carrier-neutral colocation provider, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. Open Data Centers is a carrier-neutral data center operator in New Jersey and New York City offering alternative connectivity options for carriers, service providers and enterprise customers.
Mar. 1, 2015 12:00 PM EST Reads: 1,875
In his session at DevOps Summit, Tapabrata Pal, Director of Enterprise Architecture at Capital One, will tell a story about how Capital One has embraced Agile and DevOps Security practices across the Enterprise – driven by Enterprise Architecture; bringing in Development, Operations and Information Security organizations together. Capital Ones DevOpsSec practice is based upon three "pillars" – Shift-Left, Automate Everything, Dashboard Everything. Within about three years, from 100% waterfall, C...
Mar. 1, 2015 11:00 AM EST Reads: 2,694
Even as cloud and managed services grow increasingly central to business strategy and performance, challenges remain. The biggest sticking point for companies seeking to capitalize on the cloud is data security. Keeping data safe is an issue in any computing environment, and it has been a focus since the earliest days of the cloud revolution. Understandably so: a lot can go wrong when you allow valuable information to live outside the firewall. Recent revelations about government snooping, along...
Mar. 1, 2015 11:00 AM EST Reads: 6,937
Mar. 1, 2015 10:30 AM EST Reads: 2,542
PubNub on Monday has announced that it is partnering with IBM to bring its sophisticated real-time data streaming and messaging capabilities to Bluemix, IBM’s cloud development platform. “Today’s app and connected devices require an always-on connection, but building a secure, scalable solution from the ground up is time consuming, resource intensive, and error-prone,” said Todd Greene, CEO of PubNub. “PubNub enables web, mobile and IoT developers building apps on IBM Bluemix to quickly add sc...
Mar. 1, 2015 10:00 AM EST Reads: 4,706
The cloud has transformed how we think about software quality. Instead of preventing failures, we must focus on automatic recovery from failure. In other words, resilience trumps traditional quality measures. Continuous delivery models further squeeze traditional notions of quality. Remember the venerable project management Iron Triangle? Among time, scope, and cost, you can only fix two or quality will suffer. Only in today's DevOps world, continuous testing, integration, and deployment upend...
Mar. 1, 2015 09:45 AM EST Reads: 2,251