|By Business Wire||
|May 15, 2014 01:55 PM EDT||
Dassault Systèmes (Euronext Paris: #13065, DSY.PA), the 3DEXPERIENCE Company, world leader in 3D design software, 3D Digital Mock Up and Product Lifecycle Management (PLM) solutions, today announced that its advanced 3D design and simulation software was used to recreate the technological and engineering innovations of WWII as a part of the seventieth anniversary of D-Day and the Invasion of Normandy.
To commemorate the 70th anniversary of D-Day and preserve innovations that supported the allied victory in WWII, Dassault Systèmes led a team of experts that built scientifically-accurate recreations of key engineering achievements. Created with CATIA, the same technology used by leading manufacturers to digitally design cars, airplanes and other advanced products, these 3D recreations can be experienced through a number of different technologies, from a typical computer screen, to Oculus Rift virtual reality headsets, to an immersive virtual reality experience as shown here. (Photo: Business Wire)
To safeguard the memory of some of the remarkable engineering achievements of D-Day and preserve it for future generations, Dassault Systèmes’ Passion for Innovation Institute embarked on an ambitious reconstruction project, the results of which can be seen at http://www.3ds.com/dday/. Much of the hardware deployed on D-Day was part of a huge effort among the Allies to develop the weapons, airplanes, landing crafts and other innovations that could turn the tide of the war. Each invention had the promise of tipping the balance toward victory. A beach assault required the engineering of wholly new ways to land an invading army, along with the necessary gear and supplies that the operation entailed.
Some of the innovations engineered for that day included:
- The Landing Craft, Vehicle & Personnel (LCVP) was designed by American businessman Andrew Jackson Higgins and carried a platoon-sized CK complement of men and weapons to the beaches of Normandy.
- The Waco CG-4A gliders were relatively small, lightweight and maneuverable planes. Most importantly, they were silent and could land troops in enemy territory during the early hours of the June 6 invasion. The glider could carry up to 13 men or a vehicle.
- The Mulberry Harbor was one of the most extraordinary technological feats of WWII. Developed in part by Major Allan Beckett of the Royal Engineers, it was an artificial harbor built in England, transported across the English Channel and assembled off the coast at Arromanches to unload the vast quantities of supplies and men that were needed for battle. The Mulberry Harbor was the first temporary deep water facility of its kind ever devised.
Today, nearly seventy years after D-Day, only pieces of the Harbor remain. To recreate the Harbor, the Dassault Systèmes team compiled what remained of the original plans from the Royal Engineers Museum in London, the construction and maintenance manuals, the aerial photographs taken at the time and additional information provided by Tim Beckett, the son of Mulberry Harbor designer Allan Beckett, himself a marine engineer.
All of this valuable data was brought together and scrutinized over a period of almost eight months by the lab teams. Using the 3DEXPERIENCE Platform developed by Dassault Systèmes for the design, engineering and improvement of industrial products, the teams were able to recreate the Mulberry Harbor and enable the son of its inventor to virtually stand on it in an immersive 3D experience. The 3D model is an accurate, scientific reconstruction of the Harbor that will allow many to see and experience a site that was destroyed after WWII.
The Dassault Systèmes teams also identified, located and gathered all available data in order to create detailed 3D models of both the Waco glider and LCVP landing craft, right down to the last nut and bolt, taking careful account of the specific materials used and how they would have behaved in actual conditions.
“Virtually reconstructing the Mulberry Harbor, the LCVP landing craft and the Waco glider brings to life one of the most exciting episodes of 20th-century history for the broadest possible audience, safeguarding this valuable part of our engineering heritage – a heritage that is gradually being lost,” said Mehdi Tayoubi, Passion for Innovation Institute Director & Experiential Strategy VP for Dassault Systèmes. “This project builds a bridge between the engineers of yesterday and today by preserving the memory of these remarkable technological innovations. The result is a fitting tribute to the engineers of then and now.”
Dassault Systèmes’ recreation of the Mulberry Harbor will be featured in an upcoming two-hour documentary, “D-Day’s Sunken Secrets,” produced by the PBS science series, NOVA. The film follows an elite team as they carry out the most extensive survey ever done of the seabed bordering the legendary D-Day beachheads of Normandy, revealing the ingenious technology that helped the Allies overcome the German defenses and ultimately liberate Europe from the Nazis.
Dassault Systèmes’ Passion for Innovation Institute puts the company’s technology and knowledge at the service of research, education, culture and artistic creation, helping innovators ask and answer questions about the past and future. The Institute is dedicated to preserving our world’s industrial heritage and in the past has helped solve the mystery of how pyramids were built, recreate the Giza Plateau in Egypt, bring 3D technology to the world of dance and create a historical reconstruction of Paris throughout the ages.
Representatives of Dassault Systèmes’ Passion for Innovation Institute will demonstrate the technology used in their WWII recreations at an event at WGBH’s Boston Headquarters on Thursday, May 15, 2014. As part of the event, NOVA will present a sneak peek of “D-Day’s Sunken Secrets” and members of the production team will participate in a panel discussion and audience Q&A.
“NOVA: D-Day’s Sunken Secrets” premieres Wednesday, May 28, 2014 at 9PM EDT on PBS (check local listings). “D-Day’s Sunken Secrets” is a NOVA production, produced by Hamilton Land and Cattle, Inc. for NOVA/WGBH Boston in association with MC4, France 3, MC4/LCL/Dassault Systèmes - Passion for Innovation Institute/Canopé-CNDP coproduction with the participation of France Télévisions.
About Dassault Systèmes
Dassault Systèmes, the 3DEXPERIENCE Company, provides business and people with virtual universes to imagine sustainable innovations. Its world-leading solutions transform the way products are designed, produced, and supported. Dassault Systèmes’ collaborative solutions foster social innovation, expanding possibilities for the virtual world to improve the real world. The group brings value to over 190,000 customers of all sizes, in all industries, in more than 140 countries. For more information, visit www.3ds.com.
CATIA, SOLIDWORKS, SIMULIA, DELMIA, ENOVIA, GEOVIA, EXALEAD, NETVIBES, 3DSWYM, 3D VIA and 3DXCITE are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.
May. 5, 2015 01:15 PM EDT Reads: 1,182
May. 5, 2015 12:15 PM EDT Reads: 598
May. 5, 2015 12:00 PM EDT Reads: 5,110
May. 5, 2015 12:00 PM EDT Reads: 4,457
May. 5, 2015 11:45 AM EDT Reads: 1,130
May. 5, 2015 11:00 AM EDT Reads: 4,358
May. 5, 2015 11:00 AM EDT Reads: 5,769
May. 5, 2015 11:00 AM EDT Reads: 3,886
May. 5, 2015 11:00 AM EDT Reads: 2,910
May. 5, 2015 10:45 AM EDT Reads: 2,238
May. 5, 2015 10:45 AM EDT Reads: 4,376
May. 5, 2015 10:30 AM EDT Reads: 765
May. 5, 2015 10:30 AM EDT Reads: 5,385
May. 5, 2015 10:15 AM EDT Reads: 4,460
May. 5, 2015 10:15 AM EDT Reads: 3,143