SYS-CON MEDIA Authors: Elizabeth White, Xenia von Wedel, Peter Silva, Glenn Rossman, Ava Smith

News Feed Item

TomaGold Corporation: IAMGOLD Provides Update on the Drilling Program on the Monster Lake Project

MONTREAL, QUEBEC -- (Marketwired) -- 05/27/14 -- IAMGOLD Corporation ("IAMGOLD" or the "Company") today provided an update from ongoing exploration activities at its newly optioned Monster Lake project located 50 kilometres southwest of Chibougamau, Quebec, Canada. IAMGOLD initiated the current exploration program on the project at the end of 2013 pursuant to an Earn-In Agreement finalized with TomaGold Corporation (TSX VENTURE:LOT), in which IAMGOLD may earn a 50% interest in each of the Monster Lake, Winchester and Lac a l'eau jaune properties, collectively referred as the Monster Lake Project. To earn its interest IAMGOLD must complete scheduled cash payments and exploration expenditures totaling US$17.6 million over five years.

The company has completed a phase one diamond drilling program totalling 4,528 metres (nine holes) targeting the direct down-dip and lateral extensions of the 325-Megane mineralized zone previously drilled by TomaGold. Assay results have been received for five drill holes totalling 2,835 meters and are provided in Table I below. A drill hole plan map and longitudinal section are attached to this news release.

Highlights include:


--  10.47 metres grading 11.55 g/t Au from 457.0 metres depth (including
    48.90 g/t Au over 2.0 metres) in hole ML-14-108 (325-Megane Zone), 
    
--  Intersection of a footwall zone grading 13.65 g/t Au over 3.77 metres
    from 636.86m depth, including 46.0 g/t Au over 1.1 metres in hole ML-14-
    110 (referred to as the Lower 325-Megane Zone) 

The drilling to date has confirmed the presence of three sheared, altered and mineralized zones: the Upper 325-Megane Zone (new identified structure), the 325-Megane Zone previously outlined by TomaGold's most recent drilling and the Lower 325-Megane Zone (tested only in a few areas by previous drilling). With the limited drilling completed to date, the three zones appear sub-parallel and are spaced approximately 100 metres apart. The targeted 325-Megane Zone is interpreted to be hosted within a regional shear zone that can be traced along strike within the current property.

Craig MacDougall, Senior Vice President, Exploration for IAMGOLD, stated, "Our exploration program is targeting high grade mineralization and I am very encouraged with these initial results from only our first drilling program. Our exploration team continues to target possible extensions of the 325-Megane Zone and has already confirmed the presence of other mineralized zones. Work will continue to focus on identifying additional targets with potential for the discovery of new high grade zones."

The Monster Lake project is underlain by Archean volcanic rocks of the Obatogamau Formation and is traversed by an important deformation corridor and gold-bearing mineralized structures. Historical drilling and recent success by TomaGold have identified at least a four-kilometre long mineralized structure hosting most of the gold surface showings and diamond drilling intersections, including the 325-Megane Zone.

Next Steps

The Company's approved 2014 exploration program for the Monster Lake project includes a minimum of 8,000 metres of diamond drilling. A summer mapping program is getting underway to help delineate and confirm priority targets in the central core of the Monster Lake property and in the regional extension of the deformation corridor on the Lac a l'eau jaune and Winchester properties. Further detailed assessment of historic gold occurrences will be carried out. The recently completed high resolution airborne magnetic survey will also help to develop a structural framework to identify target areas for further exploration.

Technical Information and Quality Control Notes

The drilling results contained in this news release have been prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101").

The "Qualified Person" responsible for the supervision of the preparation and review of this information is Marie-France Bugnon, P. Geo., General Manager Exploration. Marie-France is considered a "Qualified Person" for the purposes of National Instrument 43-101 with respect to the technical information being reported on. The technical information has been included herein with the consent and prior review of the above noted Qualified Person. The Qualified person has verified the data disclosed, and data underlying the information or opinions contained herein.

The sampling of, and assay data from, drill core is monitored through the implementation of a quality assurance - quality control (QA-QC) program designed to follow industry best practice. Drill core (NQ size) samples are selected by the IAMGOLD geologists and sawn in half with a diamond saw at the project site. Half of the core is retained at the site for reference purposes. Sample intervals may vary from half a metre to one and a half metres in length depending on the geological observations.

Samples are transported in sealed bags to the AGAT Laboratory prep lab facility in Val-d'Or, Quebec. Samples are coarse crushed to a -10 mesh and then a 1000 gram split is pulverized to 95% passing -150 mesh. Analytical pulps are forwarded for analysis at the AGAT Laboratories (ISO / IEC 17025 Certified by the Standards Council of Canada) in Mississauga, Ontario. Samples are analyzed using a standard fire assay with a 50 gram charge with an Atomic Absorption (AA) finish. For samples that return assay values over 5.0 grams per tonne (g/t), another pulp is taken and fire assayed with a gravimetric finish. Core samples showing visible gold or samples which have returned values greater than 10.0 g/t are re-analyzed by pulp metallic analysis. IAMGOLD inserts blanks and certified reference standard in the sample sequence for quality control.

About TomaGold Corporation

TomaGold Corporation is a Canadian-based mining exploration company whose primary mission is the acquisition, exploration and development of gold projects in Canada and abroad.

Neither the TSX Venture Exchange nor its regulation services provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. The statements made in this news release that are not historical facts are "forward-looking statements". Readers are cautioned that any such statements are not guarantees of future performance, and that actual developments or results may vary materially from those described in these "forward-looking" statements.

Table 1


----------------------------------------------------------------------------
    Monster Lake Project Drilling Results - 2014 Winter Drilling program    
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Hole No.                        UTMNAD83Zone18(1)       AZ      DIP      EOH
----------------------------------------------------------------------------
                 Easting    Northing    Elevation                        (m)
----------------------------------------------------------------------------
ML-14-108         520296     5488383          370      290      -55      480
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
Including(3)                                                                
----------------------------------------------------------------------------
Including(3)                                                                
----------------------------------------------------------------------------
ML-14-109         520316     5488270          370      290      -55      582
----------------------------------------------------------------------------
Including(3)                                                                
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
ML-14-110         520302     5488169          370      290      -50      667
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
Including(3)                                                                
----------------------------------------------------------------------------
ML-14-111         520318     5488324          370      290      -60      454
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
ML-14-112         520315     5488321          370      291      -53      652
----------------------------------------------------------------------------
Including(3)                                                                
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------

----------------------------------------------------------------------------
Hole No.         from       To Interval      True        Au NOTE            
                                         Width(2)                           
----------------------------------------------------------------------------
                  (m)      (m)      (m)       (m)     (g/t)                 
----------------------------------------------------------------------------
ML-14-108       56.10    58.00     1.90      1.65      1.81 Upper 325-Megane
                                                            Zone            
----------------------------------------------------------------------------
               445.25   446.50     1.25      1.08      6.44                 
----------------------------------------------------------------------------
               457.00   467.47    10.47      9.07     11.55 325-Megane Zone 
----------------------------------------------------------------------------
Including(3)   458.00   460.00     2.00      1.73     48.90                 
----------------------------------------------------------------------------
Including(3)   466.00   467.47     1.47      1.27     11.10                 
----------------------------------------------------------------------------
ML-14-109       66.00    71.16     5.16      4.47      1.30 Upper 325-Megane
                                                            Zone            
----------------------------------------------------------------------------
Including(3)    69.00    71.16     2.16      1.87      1.64 Upper 325-Megane
                                                            Zone            
----------------------------------------------------------------------------
               559.77   560.41     0.64      0.55      0.95 325-Megane Zone 
----------------------------------------------------------------------------
ML-14-110      210.10   211.26     1.16      1.00      1.04                 
----------------------------------------------------------------------------
               508.00   509.45     1.45      1.26      0.71 325-Megane Zone 
----------------------------------------------------------------------------
               636.86   640.63     3.77      3.26     13.65 Lower 325-Megane
                                                            Zone            
----------------------------------------------------------------------------
Including(3)   638.80   639.88     1.08      0.94     46.17                 
----------------------------------------------------------------------------
ML-14-111       59.59    60.13     0.54      0.47      3.48 Upper 325-Megane
                                                            Zone            
----------------------------------------------------------------------------
               300.92   301.92     1.00      0.87      1.40 325-Megane Zone 
----------------------------------------------------------------------------
               420.18   421.16     0.98      0.85      1.85 Lower 325-Megane
                                                            Zone            
----------------------------------------------------------------------------
ML-14-112      480.90   489.27     8.37      7.25      1.32 325-Megane Zone 
----------------------------------------------------------------------------
Including(3)   485.18   487.27     2.09      1.81      2.97                 
----------------------------------------------------------------------------
               596.51   597.65     1.14      1.00      1.48 Lower 325-Megane
                                                            Zone            
----------------------------------------------------------------------------

Notes:


1.  Drill hole intercepts are calculated with a lower cut of 0.50 g/t Au and
    represents the best results associated to the intersected structure. 
2.  True widths of intersections are approximately 85-90% of the core
    interval. 
3.  Assays are reported uncut but high grade sub-intervals are highlighted. 

Maps are available at the following address: http://media3.marketwire.com/docs/948195_Map_ENG.pdf

Contacts:
TomaGold Corporation
David Grondin
President and Chief Executive Officer
(514) 206-7727
www.tomagoldcorp.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
"We help companies that are using a lot of Software as a Service. We help companies manage and gain visibility into what people are using inside the company and decide to secure them or use standards to lock down or to embrace the adoption of SaaS inside the company," explained Scott Kriz, Co-founder and CEO of Bitium, in this SYS-CON.tv interview at 15th Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
When an enterprise builds a hybrid IaaS cloud connecting its data center to one or more public clouds, security is often a major topic along with the other challenges involved. Security is closely intertwined with the networking choices made for the hybrid cloud. Traditional networking approaches for building a hybrid cloud try to kludge together the enterprise infrastructure with the public cloud. Consequently this approach requires risky, deep "surgery" including changes to firewalls, subnets...
15th Cloud Expo, which took place Nov. 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA, expanded the conference content of @ThingsExpo, Big Data Expo, and DevOps Summit to include two developer events. IBM held a Bluemix Developer Playground on November 5 and ElasticBox held a Hackathon on November 6. Both events took place on the expo floor. The Bluemix Developer Playground, for developers of all levels, highlighted the ease of use of Bluemix, its services and functionalit...
Want to enable self-service provisioning of application environments in minutes that mirror production? Can you automatically provide rich data with code-level detail back to the developers when issues occur in production? In his session at DevOps Summit, David Tesar, Microsoft Technical Evangelist on Microsoft Azure and DevOps, will discuss how to accomplish this and more utilizing technologies such as Microsoft Azure, Visual Studio online, and Application Insights in this demo-heavy session.
DevOps is all about agility. However, you don't want to be on a high-speed bus to nowhere. The right DevOps approach controls velocity with a tight feedback loop that not only consists of operational data but also incorporates business context. With a business context in the decision making, the right business priorities are incorporated, which results in a higher value creation. In his session at DevOps Summit, Todd Rader, Solutions Architect at AppDynamics, discussed key monitoring techniques...
Some developers believe that monitoring is a function of the operations team. Some operations teams firmly believe that monitoring the systems they maintain is sufficient to run the business successfully. Most of them are wrong. The complexity of today's applications have gone far and beyond the capabilities of "traditional" system-level monitoring tools and approaches and requires much broader knowledge of business and applications as a whole. The goal of DevOps is to connect all aspects of app...
"SAP had made a big transition into the cloud as we believe it has significant value for our customers, drives innovation and is easy to consume. When you look at the SAP portfolio, SAP HANA is the underlying platform and it powers all of our platforms and all of our analytics," explained Thorsten Leiduck, VP ISVs & Digital Commerce at SAP, in this SYS-CON.tv interview at 15th Cloud Expo, held Nov 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
SAP is delivering break-through innovation combined with fantastic user experience powered by the market-leading in-memory technology, SAP HANA. In his General Session at 15th Cloud Expo, Thorsten Leiduck, VP ISVs & Digital Commerce, SAP, discussed how SAP and partners provide cloud and hybrid cloud solutions as well as real-time Big Data offerings that help companies of all sizes and industries run better. SAP launched an application challenge to award the most innovative SAP HANA and SAP HANA...
One of the biggest challenges when developing connected devices is identifying user value and delivering it through successful user experiences. In his session at Internet of @ThingsExpo, Mike Kuniavsky, Principal Scientist, Innovation Services at PARC, described an IoT-specific approach to user experience design that combines approaches from interaction design, industrial design and service design to create experiences that go beyond simple connected gadgets to create lasting, multi-device exp...
Enthusiasm for the Internet of Things has reached an all-time high. In 2013 alone, venture capitalists spent more than $1 billion dollars investing in the IoT space. With "smart" appliances and devices, IoT covers wearable smart devices, cloud services to hardware companies. Nest, a Google company, detects temperatures inside homes and automatically adjusts it by tracking its user's habit. These technologies are quickly developing and with it come challenges such as bridging infrastructure gaps,...
"Cloud consumption is something we envision at Solgenia. That is trying to let the cloud spread to the user as a consumption, as utility computing. We want to allow the people to just pay for what they use, not a subscription model," explained Ermanno Bonifazi, CEO & Founder of Solgenia, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
The Domain Name Service (DNS) is one of the most important components in networking infrastructure, enabling users and services to access applications by translating URLs (names) into IP addresses (numbers). Because every icon and URL and all embedded content on a website requires a DNS lookup loading complex sites necessitates hundreds of DNS queries. In addition, as more internet-enabled ‘Things' get connected, people will rely on DNS to name and find their fridges, toasters and toilets. Acco...
"For the past 4 years we have been working mainly to export. For the last 3 or 4 years the main market was Russia. In the past year we have been working to expand our footprint in Europe and the United States," explained Andris Gailitis, CEO of DEAC, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective ...
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using ...