SYS-CON MEDIA Authors: Xenia von Wedel, Peter Silva, Glenn Rossman, Ava Smith, Elizabeth White

News Feed Item

TerraX Drills 10.02 m @ 4.17 g/t Au, Inclusive of 2.89 m @ 10.88 g/t Au at Crestaurum Zone, Yellowknife City Gold Project

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 06/02/14 -- TerraX Minerals Inc. (TSX VENTURE:TXR)(FRANKFURT:TX0) has received assay results from the final nine holes drilled during the recently completed winter drill program on the Northbelt Property, Yellowknife City Gold Project. Four of these holes were drilled at Crestaurum (533m) and five holes were drilled to test the northern extension of the Barney Shear target (751m). Three of the holes drilled at Crestaurum were designed to twin historic drill holes for which no drill core is available and confirmed the correlation with historic drill results. Highlights include 10.02 m @ 4.17 g/t Au, inclusive of 2.89 m @ 10.88 g/t Au, in hole TNB14-011.

CRESTAURUM ZONE

In the summer of 2013 TerraX recovered core from 74 drill holes drilled into Crestaurum during 1985, and TerraX subsequently reported assay results of sampling of that core, including 5.00 m @ 62.90 g/t Au (news release Oct 2, 2013). A further 117 holes were drilled into the Crestaurum Zone between 1945 and 1980 for which TerraX has not recovered any historical core. Historical logs and assays for these holes were recovered in 2013, and collar locations were found in the field. Based on this information, TerraX is planning on drilling a total of 12 twin holes to verify historical logs and assays, with the remaining nine holes to be completed during the summer drill program expected to begin in late June 2014

The twin hole locations are designed to give TerraX spatial coverage of the known zone of mineralization over 1.4 km of strike and 150 m of dip length, and to provide a representative range of grade and thickness. This will include low, moderate and high grade intersections over narrow to wide zones at all grade ranges.

Results of TerraX's assays for the three Crestaurum twin holes drilled to date are tabulated below, along with the historical intervals for comparison. In general the holes intersected mineralization where expected, confirming the location and thickness of the zones as indicated by the historical records. Grades showed some variation as would be expected for lode style quartz vein hosted gold deposits, but based on these three holes there appears to be good unbiased grade correlation with historical results. Two holes (TNB14-006 and 011) were drilled into the South Shoot and one hole (TNB14-012) was drilled a kilometer along strike in the North Shoot. If the good correlation continues with the remaining nine twin holes it will confirm historical drill results, and allow use of this information in the preparation of an NI 43-101 compliant resource estimate at Crestaurum.


----------------------------------------------------------------------------
                          Crestaurum Twinned Holes                          
----------------------------------------------------------------------------
 TerraX 2014 Drill Hole Intersections  Twinned Historical Drill Hole Results
----------------------------------------------------------------------------
                                    Au                                    Au
Hole        From     To Interval   g/t     Hole   From     To Interval   g/t
----------------------------------------------------------------------------
TNB14-011  94.31 104.33    10.02  4.17 DDH45-52  97.14 106.89     9.75  3.99
----------------------------------------------------------------------------
    incl.  94.31 100.05     5.74  6.81           98.03 103.37     5.34  6.19
----------------------------------------------------------------------------
and incl.  94.31  97.20     2.89 10.88                                      
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
TNB14-006  55.00  56.47     1.47  8.73 DDH45-50  55.00  56.47     1.47  5.69
----------------------------------------------------------------------------
    incl.  55.00  55.70     0.70 18.25    incl.  55.78  55.93     0.15 54.86
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
      and 101.90 103.40     1.50  2.01          101.24 103.74     1.50  4.02
----------------------------------------------------------------------------
                                          incl. 103.07 103.34     0.27 14.06
----------------------------------------------------------------------------
                                                                            
----------------------------------------------------------------------------
TNB14-012  88.11  91.65     3.54  1.35 DDH45-39  91.29  94.77     3.48  5.00
----------------------------------------------------------------------------
                                          incl.  92.61  92.86     0.25 48.01
----------------------------------------------------------------------------

Drill intersections at Crestaurum are considered to be normal to strike and dip and represent true thickness of the zone.

A fourth hole drilled by TerraX at Crestaurum was designed to intersect the interpreted mineralized zone at an acutely oblique angle to verify interpretations of zone geometry and check for alternative interpretations for zone geometry. This hole was collared at the wrong dip and azimuth and failed to intersect the zone. It will be re-drilled at a different orientation during the summer program.

BARNEY ZONE

Drilling at the Barney Zone was purely exploratory and designed to test the interpreted northern strike extension of the historically drilled mineralization (termed the Barney North Extension). Five drill holes were collared 150-250 meters north along the interpreted strike from the 1995-96 drill holes reported by TerraX on recovered historical core (20.86 m @ 3.79 g/t Au, including 4.00 m @ 12.34 g/t Au in hole NB95-16 reported August 14, 2013). TerraX drilling was also designed to intersect the zones of mineralization closer to surface, at approximately 50-100 m below surface. This location is 150-300 m above the historical drill hole intersections. None of the historical drilling tested the shallow up-dip extensions of mineralization encountered in the deeper 1995-96 drill holes.

Drill results from the Barney North Extension are listed in the table below. The initial hole (TNB14-007) intersected the host shear structure, but was devoid of mineralization. Encouraged by the discovery of the shear zone, hole TNB14-008 was drilled directly under TNB14-007 and encountered quartz carbonate veining with significant sulphides, including galena, arsenopyrite and pyrite. This hole intersected 6.00m @ 1.49 g/t Au, 12.3 g/t Ag and 0.50% Pb, including 2.20m @ 3.63 g/t Au.

A further hole (TNB14-009) was drilled to intersect the zone approximately 25 m south of holes TNB14-007 and 008. This hole was again designed to intersect the zone at shallow depths, but in this case it was weakly mineralized with an intersection of 0.96m @ 1.04 g/t Au, 24.1 g/t Ag and 0.93% Pb. TerraX then drilled a hole (TNB14-010) approximately 25m south and 50m down dip of the intersection in TNB14-009. The shear zones became significantly wider with multiple zones of better mineralization, including a central zone of 12.50m @ 1.40 g/t Au, 20.3 g/t Ag and 1.69% Pb, including 4.00m @ 3.62 g/t Au.

The final hole (TNB14-014) was drilled 100m north of holes TNB14-007 and 008 to target the interpreted host shear zone at shallow depth. This hole was stopped at 78m depth as spring breakup required shutdown and removal of the drill. Regardless, the hole had entered a zone of shearing corresponding to the interpreted Barney North Extension and although only at a very shallow depth (approximately 40m vertical) it was weakly mineralized returning 2.97m @ 0.46 g/t Au in a zone of quartz carbonate veining and shearing.


-----------------------------------------------------------------------
                    Barney North Extension Drilling                    
-----------------------------------------------------------------------
Hole             From        To  Interval    Au g/t    Ag g/t      Pb %
-----------------------------------------------------------------------
TNB14-007                      No significant assays                   
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
TNB14-008       91.00     97.00      6.00      1.49      12.3      0.50
-----------------------------------------------------------------------
      incl.     94.07     96.27      2.20      3.63      11.6      0.41
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
TNB14-009      118.58    119.54      0.96      1.04      24.1      0.93
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
TNB14-010      113.30    114.70      1.40      0.30      12.4      0.37
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
        and    131.50    144.00     12.50      1.40      20.3      1.69
-----------------------------------------------------------------------
      incl.    131.50    134.15      2.65      0.28      86.7      7.73
-----------------------------------------------------------------------
  and incl.    140.00    144.00      4.00      3.62       3.0      0.02
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
        and    162.65    167.00      4.35      0.95       3.3      0.10
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
        and    215.25    216.25      1.00      1.86                    
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
                                                         Cu %          
-----------------------------------------------------------------------
TNB14-014       16.50     17.17      0.67     0.323      0.18          
-----------------------------------------------------------------------
                                                                       
-----------------------------------------------------------------------
        and     52.59     55.56      2.97      0.46                    
-----------------------------------------------------------------------

True thickness of the zones at the Barney North Extension of mineralization is unknown at present. Based on core foliation angles it is estimated to be between 60-90% of drill intersection width.

The drilling on the Barney North Extension has confirmed that the Barney Zone of mineralization continues for at least 250 meters further north and a similar distance up-dip of historical drilling. Based on 2014 drilling results the mineralized zones are strengthening and widening with depth. The initial 2014 drilling has greatly extended the target area for the Barney Zone and this mineralization will be followed down-dip and further north along strike in future drilling. The summer drill program, expected to begin in late June 2014, will be at the known main Barney Zone. Historical drill holes at the Barney Zone were cased and capped in 1995-96 in anticipation of re-entry into those holes. TerraX's initial drilling at Barney will consist of wedges off historical deeper drill holes (250-450 m vertical depth for mineralized intercepts). This will generate up-dip intersections from previously intersected mineralized zones, and be used by TerraX to construct strike and dip interpretations of those zones. Additionally it is expected that the summer program will include drill holes to indicate continuity between the main Barney Zone and the Barney North Extension.

TerraX collected 504 samples for assay from the Crestaurum drilling, and 583 samples from the Barney North Extension drilling. Results ranged from below detection in all metals to highs of 21.30 g/t Au, 169 g/t Ag, and 14.30% Pb, in separate samples.

Drill hole collar locations were surveyed to sub-meter accuracy. Down hole surveying (Easy Shot and Maxibor) was completed on all holes. Core sampling included insertion of certified standards and blanks. Drill core samples are cut by diamond saw at TerraX's core facility in Yellowknife. A halved core sample is left in the core box. The other half core is sampled and transported by TerraX personnel in securely sealed bags to ALS Chemex's preparation laboratory in Yellowknife. After sample preparation, samples are shipped to ALS Chemex's Vancouver facility for gold and ICP analysis. Gold assays of greater than 3 g/t are re-assayed on a 30 gm split by fire assay with a gravimetric finish. Silver ICP results over 100 g/t and lead ICP over 5000 ppm are subjected to ore grade analyses. ALS is a certified and accredited laboratory service. ALS routinely inserts certified gold standards, blanks and pulp duplicates, and results of all QC samples are reported.

TerraX and GeoVector Management Inc. were responsible for planning the drill holes at Crestaurum and Barney. GeoVector was also responsible for the management and supervision of the drill program. The technical information contained in this news release has been approved by Joseph Campbell, the President of TerraX, who is a Qualified Person as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects."

About the Yellowknife City Gold Project

The Yellowknife City Gold Project encompasses approximately 8,400 hectares of contiguous land immediately north of the City of Yellowknife in the Northwest Territories and includes TerraX's wholly-owned Northbelt property acquired in February 2013.

The Northbelt gold property encompasses 3,562 hectares on the prolific Yellowknife belt, all within 15 km of the city of Yellowknife, and covers 13 km of strike on the northern extension of the geology that contained the Giant (7.8 Moz) and Con (5.5 Moz) gold mines. The Northbelt property is host to multiple shears that are the recognized hosts for gold deposits in the Yellowknife camp and it contains innumerable gold showings and historic high grade drill results.

TerraX has carried out a strategy of acquiring prospective ground adjacent to Northbelt and in October 2013 entered into an option agreement whereby it can acquire a 100% interest in the Walsh Lake gold property, which is contiguous with and immediately east of Northbelt. The Walsh Lake property consists of seven leases and five claims totaling 6,659 acres (2,695 hectares). TerraX has also staked and acquired ground to the west of Northbelt to cover prospective geology that is on strike from Northbelt structures.

For more information on the Yellowknife City Gold Project, please visit our web site at www.terraxminerals.com.

On behalf of the Board of Directors

Joseph Campbell, President

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains forward-looking information, which involves known and unknown risks, uncertainties and other factors that may cause actual events to differ materially from current expectation. Important factors - including the availability of funds, the results of financing efforts, the completion of due diligence and the results of exploration activities - that could cause actual results to differ materially from the Company's expectations are disclosed in the Company's documents filed from time to time on SEDAR (see www.sedar.com). Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The company disclaims any intention or obligation, except to the extent required by law, to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
We are all here because we are sold on the transformative promise of The Cloud. But what good is all of this ephemeral, on-demand infrastructure if your usage doesn't actually improve the agility and speed of your business? How must Operations adapt in order to avoid stifling your Cloud initiative? In his session at DevOps Summit, Damon Edwards, co-founder and managing partner of the DTO Solutions, will highlight the successful organizational, process, and tooling patterns of high-performing c...
The definition of IoT is not new, in fact it’s been around for over a decade. What has changed is the public's awareness that the technology we use on a daily basis has caught up on the vision of an always on, always connected world. If you look into the details of what comprises the IoT, you’ll see that it includes everything from cloud computing, Big Data analytics, “Things,” Web communication, applications, network, storage, etc. It is essentially including everything connected online from ha...
Software-driven innovation is becoming a primary approach to how businesses create and deliver new value to customers. A survey of 400 business and IT executives by the IBM Institute for Business Value showed businesses that are more effective at software delivery are also more profitable than their peers nearly 70 percent of the time (1). DevOps provides a way for businesses to remain competitive, applying lean and agile principles to software development to speed the delivery of software that ...
Docker offers a new, lightweight approach to application portability. Applications are shipped using a common container format and managed with a high-level API. Their processes run within isolated namespaces that abstract the operating environment independently of the distribution, versions, network setup, and other details of this environment. This "containerization" has often been nicknamed "the new virtualization." But containers are more than lightweight virtual machines. Beyond their small...
The move in recent years to cloud computing services and architectures has added significant pace to the application development and deployment environment. When enterprise IT can spin up large computing instances in just minutes, developers can also design and deploy in small time frames that were unimaginable a few years ago. The consequent move toward lean, agile, and fast development leads to the need for the development and operations sides to work very closely together. Thus, DevOps become...
Cloud Expo 2014 TV commercials will feature @ThingsExpo, which was launched in June, 2014 at New York City's Javits Center as the largest 'Internet of Things' event in the world.

ARMONK, N.Y., Nov. 20, 2014 /PRNewswire/ --  IBM (NYSE: IBM) today announced that it is bringing a greater level of control, security and flexibility to cloud-based application development and delivery with a single-tenant version of Bluemix, IBM's

An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and asse...
The major cloud platforms defy a simple, side-by-side analysis. Each of the major IaaS public-cloud platforms offers their own unique strengths and functionality. Options for on-site private cloud are diverse as well, and must be designed and deployed while taking existing legacy architecture and infrastructure into account. Then the reality is that most enterprises are embarking on a hybrid cloud strategy and programs. In this Power Panel at 15th Cloud Expo (http://www.CloudComputingExpo.com...
Explosive growth in connected devices. Enormous amounts of data for collection and analysis. Critical use of data for split-second decision making and actionable information. All three are factors in making the Internet of Things a reality. Yet, any one factor would have an IT organization pondering its infrastructure strategy. How should your organization enhance its IT framework to enable an Internet of Things implementation? In his session at Internet of @ThingsExpo, James Kirkland, Chief Ar...
Leysin American School is an exclusive, private boarding school located in Leysin, Switzerland. Leysin selected an OpenStack-powered, private cloud as a service to manage multiple applications and provide development environments for students across the institution. Seeking to meet rigid data sovereignty and data integrity requirements while offering flexible, on-demand cloud resources to users, Leysin identified OpenStack as the clear choice to round out the school's cloud strategy. Additional...
Technology is enabling a new approach to collecting and using data. This approach, commonly referred to as the "Internet of Things" (IoT), enables businesses to use real-time data from all sorts of things including machines, devices and sensors to make better decisions, improve customer service, and lower the risk in the creation of new revenue opportunities. In his General Session at Internet of @ThingsExpo, Dave Wagstaff, Vice President and Chief Architect at BSQUARE Corporation, discuss the ...
The security devil is always in the details of the attack: the ones you've endured, the ones you prepare yourself to fend off, and the ones that, you fear, will catch you completely unaware and defenseless. The Internet of Things (IoT) is nothing if not an endless proliferation of details. It's the vision of a world in which continuous Internet connectivity and addressability is embedded into a growing range of human artifacts, into the natural world, and even into our smartphones, appliances, a...
SYS-CON Media announced today that Aruna Ravichandran, VP of Marketing, Application Performance Management and DevOps at CA Technologies, has joined DevOps Journal’s authors. DevOps Journal is focused on this critical enterprise IT topic in the world of cloud computing. DevOps Journal brings valuable information to DevOps professionals who are transforming the way enterprise IT is done. Aruna's inaugural article "Four Essential Cultural Hacks for DevOps Newbies" discusses how to demonstrate the...
"BSQUARE is in the business of selling software solutions for smart connected devices. It's obvious that IoT has moved from being a technology to being a fundamental part of business, and in the last 18 months people have said let's figure out how to do it and let's put some focus on it, " explained Dave Wagstaff, VP & Chief Architect, at BSQUARE Corporation, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.