SYS-CON MEDIA Authors: Elizabeth White, Pat Romanski, Carmen Gonzalez, Liz McMillan, Kevin Jackson

News Feed Item

Canacol Closes Strategic Acquisition of Additional Interest in LLA23 and Tests 2,898 BOPD From Labrador 4 and Leono 3 Wells

CALGARY, ALBERTA -- (Marketwired) -- 06/18/14 -- Canacol Energy Ltd. ("Canacol" or the "Corporation") (TSX: CNE)(OTCQX: CNNEF)(BVC: CNEC) is pleased to provide the following update concerning the strategic acquisition of an additional 10% working interest from Petromont Colombia S.A. Sucursal Colombia ("Petromont") in its LLA23 Exploration and Production contract located in the Llanos basin and the production test results of the Labrador 4 and Leono 3 wells also located on the LLA23 contract, which tested at a gross combined rate of 2,898 barrels of light oil per day ("bopd") (2,608 bopd net). The Corporation now has a 90% operated working interest in the LLA23 contract, with Petromont holding the remaining 10% interest. Elsewhere on the LLA23 contract the Corporation is currently rigging up on the Maltes 1 exploration well and the Pantro 2 appraisal well, and is about to commence the shooting of 400 square kilometers of 3D seismic data. As a result of the acquisition the Corporation is revising its production guidance from 12,500 to 13,500 boepd net before royalty to 13,000 to 14,000 boepd net before royalty for calendar 2014 with an anticipated exit rate for December 2014 of approximately 18,000 boepd.

Charle Gamba, President and CEO of the Corporation, commented, "This strategic acquisition has consolidated our interest in our main oil producing asset at LLA23, which accounts for approximately half of the Corporation's current 13,800 boepd of net production before royalties. With a 100% drilling success rate for both exploration and production wells to date, including the recently drilled Leono 3 and Labrador 4 wells, this strategic consolidation of interest allows us to capture almost all of the upside associated with this contract over the next several years, all now at a 90% operated working interest. We plan to drill 3 exploration wells and 7 additional development and appraisal wells during the remainder of calendar 2014, and are currently rigging up on the Maltes 1 exploration well and the Pantro 2 appraisal well. The Corporation is also about to commence shooting 400 sq km of 3D seismic data which will set up our exploration drilling programs for 2015 and 2016 on this important block."

Acquisition of 10% interest in the LLA23 contract (90% operated working interest)

Effective as of June 1, 2014, the Corporation has acquired an additional 10% working interest in the LLA 23 contract from Petromont for a purchase price of US$40 million, payable in cash and the assumption of certain liabilities related to the LLA23 contract, subject to certain post-closing adjustments relating to unbilled expenditures attributable to the acquired interest prior to the date of the transaction. Application has been made to the National Agency of Hydrocarbons of Colombia ("ANH") for formal recognition of the transaction and of the Corporation's additional 10% working interest in the LLA 23 contract.

The Acquisition has the following characteristics:


--  Current production: 775 bopd
--  Proved plus probable reserves: 1.3 mmbo of light and medium crude oil
    (May 31, 2014)(1,2)
--  Operating netback(3): $60-$65 per barrel

1.  Reserves are Gross Company Reserves as evaluated by PetroTech
    Engineering Ltd. as of May 31, 2014. Gross Company Reserves are
    Petromonts working interest reserves before the deduction of royalties.
2.  Canacol intends to release an updated corporate reserve report effective
    June 30, 2014.
3.  Based on expected average prices for Q3/Q4 2014 and historical Canacol
    operated production, transportation and royalty expenses.

Labrador 4 production test results

The Labrador 4 well was spud on April 30, 2014 and reached a total depth of 11,939 feet measured depth ("ft md") on May 18, 2014. The well encountered 111 feet ("ft") of net oil pay in the C7, Mirador, Barco, Gacheta and Ubaque reservoirs.

The Gacheta reservoir was perforated from 11,261 - 282 and 11,330 - 352 ft md and for a test period of 24 hours on the 16th of June 2014 flowed at an average gross rate of 1,193 bopd (1,074 bopd net) of 27 degrees API oil with 4% water cut and 7 thousand standard cubic feet per day ("mscfpd") of gas using an electro submersible pump ("ESP") set to a frequency of 55 Hz. The Ubaque reservoir was perforated from 11,390 - 11,394 ft md for a test period of 24 hours on June 2, 2014. The well flowed at an average gross rate of 638 bopd (574 bopd net) of 23 degrees API oil with 20% water cut believed to be related to the drilling and completion of the well, and 1 mscfpd using an ESP set to a frequency of 35 Hz. The well will be placed on permanent production from the Gacheta reservoir subject to the approval of the ANH.

Leono 3 production test results

The Leono 3 well was spud on May 12, 2014 and reached a total depth of 12,590 ft md on May 26, 2014. The well encountered 36 ft of net oil pay within the C7, Mirador, Gacheta, and Ubaque reservoirs. The Mirador reservoir was perforated from 11,158 to 11,165 ft md and for a test period of 7 days ended on the 14th of June 2014 flowed at an average gross rate of 1,067 bopd (960 bopd net) of 36 degrees API oil with 0.6 % water cut and 0.5 mscfpd of gas using a jet pump at 2,000 pounds per square inch. The well will be left on permanent production from the Mirador reservoir subject to the approval of the ANH.

Forward Plans on LLA23

The rig that drilled the Labrador 4 well is about to rig up to drill the Maltes 1 exploration well which is located approximately 2 kilometers north of the Labrador field. It is anticipated that the Maltes 1 exploration well will take approximately 6 weeks to drill and test. The rig that drilled the Leono 3 well is currently rigging up to drill the Pantro 2 appraisal well, which is located approximately 3 km south of Leono. The Pantro 2 well is anticipated to spud in the first week of July 2014, and will take approximately 6 weeks to drill and test.

The Corporation has recently obtained all of the necessary permits required to acquire 400 square kms of 3D seismic data and anticipates commencing acquisition in approximately 2 weeks. The seismic program is anticipated to be completed by the end of July 2014, with the results being used to plan the Corporation's exploration and development drilling programs on the LLA23 contract in calendar 2015 and 2016.

Canacol is an exploration and production company with operations focused in Colombia and Ecuador. The Corporation's common stock trades on the Toronto Stock Exchange, the OTCQX in the United States of America, and the Colombia Stock Exchange under ticker symbol CNE, CNNEF, and CNE.C, respectively.

This press release contains certain forward-looking statements within the meaning of applicable securities law. Forward-looking statements are frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur, including without limitation statements relating to estimated production rates from the Corporation's properties and intended work programs and associated timelines. Forward-looking statements are based on the opinions and estimates of management at the date the statements are made and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking statements. The Corporation cannot assure that actual results will be consistent with these forward looking statements. They are made as of the date hereof and are subject to change and the Corporation assumes no obligation to revise or update them to reflect new circumstances, except as required by law. Prospective investors should not place undue reliance on forward looking statements. These factors include the inherent risks involved in the exploration for and development of crude oil and natural gas properties, the uncertainties involved in interpreting drilling results and other geological and geophysical data, fluctuating energy prices, the possibility of cost overruns or unanticipated costs or delays and other uncertainties associated with the oil and gas industry. Other risk factors could include risks associated with negotiating with foreign governments as well as country risk associated with conducting international activities, and other factors, many of which are beyond the control of the Corporation.

Data obtained from the initial testing results at wells identified in this press release, including barrels of oil produced and levels of water-cut, should be considered to be preliminary until a further and detailed analysis or interpretation has been done on such data. The well test results obtained and disclosed in this press release are not necessarily indicative of long-term performance or of ultimate recovery. The reader is cautioned not to unduly rely on such results as such results may not be indicative of future performance the wells or of expected production results for the Corporation in the future.

The reserves evaluation, effective May 31, 2014, was conducted by Petrotech Engineering Ltd. and is in accordance with National Instrument 51-101 - Standards of Disclosure for Oil and Gas Activities. The reserves are provided on a net before royalty basis in units of millions of barrels of oil equivalent using a forecast price deck for oil and gas, adjusted for crude quality, in US dollars.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
"SOASTA built the concept of cloud testing in 2008. It's grown from rather meager beginnings to where now we are provisioning hundreds of thousands of servers on a daily basis on behalf of customers around the world to test their applications," explained Tom Lounibos, CEO of SOASTA, in this SYS-CON.tv interview at DevOps Summit, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
IBM has announced a new strategic technology services agreement with Anthem, Inc., a health benefits company in the U.S. IBM has been selected to provide operational services for Anthem's mainframe and data center server and storage infrastructure for the next five years. Among the benefits of the relationship, Anthem has the ability to leverage IBM Cloud solutions that will help increase the ease, availability and speed of adding infrastructure to support new business requirements.
Things are being built upon cloud foundations to transform organizations. This CEO Power Panel at 15th Cloud Expo, moderated by Roger Strukhoff, Cloud Expo and @ThingsExpo conference chair, addressed the big issues involving these technologies and, more important, the results they will achieve. Rodney Rogers, chairman and CEO of Virtustream; Brendan O'Brien, co-founder of Aria Systems, Bart Copeland, president and CEO of ActiveState Software; Jim Cowie, chief scientist at Dyn; Dave Wagstaff, VP ...
SYS-CON Media announced today that PagerDuty has launched a popular blog feed on DevOps Journal. DevOps Journal is focused on this critical enterprise IT topic in the world of cloud computing. DevOps Journal brings valuable information to DevOps professionals who are transforming the way enterprise IT is done.
SYS-CON Media announced that Cisco, a worldwide leader in IT that helps companies seize the opportunities of tomorrow, has launched a new ad campaign in Cloud Computing Journal. The ad campaign, a webcast titled 'Is Your Data Center Ready for the Application Economy?', focuses on the latest data center networking technologies, including SDN or ACI, and how customers are using SDN and ACI in their organizations to achieve business agility. The Cisco webcast is available on-demand.
“The year of the cloud – we have no idea when it's really happening but we think it's happening now. For those technology providers like Zentera that are helping enterprises move to the cloud - it's been fun to watch," noted Mike Loftus, VP Product Management and Marketing at Zentera Systems, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Today’s enterprise is being driven by disruptive competitive and human capital requirements to provide enterprise application access through not only desktops, but also mobile devices. To retrofit existing programs across all these devices using traditional programming methods is very costly and time consuming – often prohibitively so. In his session at @ThingsExpo, Jesse Shiah, CEO, President, and Co-Founder of AgilePoint Inc., discussed how you can create applications that run on all mobile ...
The Industrial Internet revolution is now underway, enabled by connected machines and billions of devices that communicate and collaborate. The massive amounts of Big Data requiring real-time analysis is flooding legacy IT systems and giving way to cloud environments that can handle the unpredictable workloads. Yet many barriers remain until we can fully realize the opportunities and benefits from the convergence of machines and devices with Big Data and the cloud, including interoperability, ...
Companies today struggle to manage the types and volume of data their customers and employees generate and use every day. With billions of requests daily, operational consistency can be elusive. In his session at Big Data Expo, Dave McCrory, CTO at Basho Technologies, will explore how a distributed systems solution, such as NoSQL, can give organizations the consistency and availability necessary to succeed with on-demand data, offering high availability at massive scale.
IoT is still a vague buzzword for many people. In his session at @ThingsExpo, Mike Kavis, Vice President & Principal Cloud Architect at Cloud Technology Partners, discussed the business value of IoT that goes far beyond the general public's perception that IoT is all about wearables and home consumer services. He also discussed how IoT is perceived by investors and how venture capitalist access this space. Other topics discussed were barriers to success, what is new, what is old, and what th...
The Internet of Things (IoT) is rapidly in the process of breaking from its heretofore relatively obscure enterprise applications (such as plant floor control and supply chain management) and going mainstream into the consumer space. More and more creative folks are interconnecting everyday products such as household items, mobile devices, appliances and cars, and unleashing new and imaginative scenarios. We are seeing a lot of excitement around applications in home automation, personal fitness,...
Security can create serious friction for DevOps processes. We've come up with an approach to alleviate the friction and provide security value to DevOps teams. In her session at DevOps Summit, Shannon Lietz, Senior Manager of DevSecOps at Intuit, will discuss how DevSecOps got started and how it has evolved. Shannon Lietz has over two decades of experience pursuing next generation security solutions. She is currently the DevSecOps Leader for Intuit where she is responsible for setting and driv...
Dale Kim is the Director of Industry Solutions at MapR. His background includes a variety of technical and management roles at information technology companies. While his experience includes work with relational databases, much of his career pertains to non-relational data in the areas of search, content management, and NoSQL, and includes senior roles in technical marketing, sales engineering, and support engineering. Dale holds an MBA from Santa Clara University, and a BA in Computer Science f...
SYS-CON Events announced today that CodeFutures, a leading supplier of database performance tools, has been named a “Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9–11, 2015, at the Javits Center in New York, NY. CodeFutures is an independent software vendor focused on providing tools that deliver database performance tools that increase productivity during database development and increase database performance and scalability during production.
The Internet of Things (IoT) promises to evolve the way the world does business; however, understanding how to apply it to your company can be a mystery. Most people struggle with understanding the potential business uses or tend to get caught up in the technology, resulting in solutions that fail to meet even minimum business goals. In his session at @ThingsExpo, Jesse Shiah, CEO / President / Co-Founder of AgilePoint Inc., showed what is needed to leverage the IoT to transform your business. ...