|By Michael Nir||
|June 23, 2014 02:16 PM EDT||
In order to create the combination between top-down problem-decisions (waterfall like approaches)and local problem-decisions (Agile project approach) here are practical guidelines to pursue
Three practical complex decision-problems guidelines:
- Simple local rules
- Strategic top down rules
- Visual problem view
We describe in detail, each practical guideline, below.
Simple local rules
This cannot be overstated. Local rules must be easy to follow. Whether these are rules for: a machine operator, traveling salesperson, a project coordinator, or you packing your bags.
The local decision rules are the ones mostly used, they must be easy to follow, understandable, and unequivocal. Consider the warehouse forklift operator who is re- stocking raw material. If she needs to follow a complex decision protocol for placing newly arrived material in the warehouse, it would result in chaos.
Instead, we need to equip her with an easy to follow mechanism for stocking the warehouse.
One such mechanism is FIFO - First In First Out. This is also the rule, you're following when stocking your fridge with groceries, if you don't want dairy products to go sour.
Supermarkets also follow this rule when their organizing their product shelves. At least, they're supposed to follow this rule, otherwise they will have outdated products on display.
The modern big supermarkets actually stock fresh items from the back, ascertaining this way, that older items are pushed forward.
Sly consumers will then pick up dairy products from the back of the shelf if they want to make sure that it is the freshest available.
There is even an acronym that goes along with local rule simplicity which is: KISS - and stands for: keep it simple and straightforward.
The Japanese KANBAN approach which we've previously mentioned, implements an easy to follow rule of thumb.
It is: when you're operating a manufacturing machine, you should only produce when the physical container carrying a finished product in front of you, is empty. In practice this was actualized by using Kanban cards. Kanban is the Japanese word for card.
For manufacturing purposes it much easier for operators to follow this simple rule. However, ordinarily in production floors, operators follow a complex weekly/daily production plan that is very confusing. This is the opposite of simple.
Make your local decision-problem rules are simple
- Travel to the next cheapest destination
- Pack the smallest item first
- Work on the easiest element first
- Stock according to FIFO
Strategic top down rules
The strategic top down rule which we select for our decision-problem has to constrain our decision space.
Consider for example a hospital's most expensive resource - the surgery room. Each such room has to be utilized as much as possible.
Reaching 100% utilization is not feasible - this can be proved using queuing theory; however 85%-90% utilization is desirable. The reason we require high utilization is for the pay back on the investment. The hospital invested money for the equipment in building and equipping the room and wishes to receive a return on the investment.
Hospitals' surgery rooms are generally a resource in shortage, hence there will always be patients requiring the room. It seems logical that the 85%-90% utilization will be easily achieved. This is not that case - the rooms are approximately 65% utilized in many cases - and it is driving the financial officers of hospitals crazy.
It drives them crazy almost to the point that they require ulcer treatment and have to wait in line for the surgical procedure - and yet the operation room is only 65% utilized.
The situation described of having lower utilization than expected and desired has to do with selecting an unsuitable top down problem-decision rule. The hospital schedules surgical procedures, utilizing the operation rooms, by using a monthly plan, as we've illustrated before, the top down plan fails because of many small changes.
What are these small changes and why do they occur?
In order to perform a surgical procedure in the operation room, the room has to be ready - i.e., cleaned, sterilized and with the proper equipment. The surgeon and his staff also have to be ready.
What happens if the surgeon and his staff are ready and waiting, however the room isn't prepped and cleaned?
The impact: we have very expensive employees (the physician, surgeon and others in the team) and a very expensive resource (the surgery room) as well as a prepped patient - all waiting for the room to be cleaned.
Wait a minute - this doesn't make sense you say! Didn't the top-down plan specify that maintenance personal have to be cleaning, equipping and readying the room?
The plan might have have designated and scheduled the cleaning to be performed, however the cleaning staff is currently working in another location and are unavailable for cleaning the specific room.
Crazy - we have two very expensive resources waiting for important yet cheaper staff.
Why aren't there enough cleaning staff?
Because the top down rule, that the ulcer stricken financial officer defined, is based on efficient planning and budgeting of resources. In this plan, it makes no logical sense hoarding on maintenance staff when we can fire them and save...
Thus, selecting the wrong top down planning, decision mechanism leads to an ineffective use of the hospital's expensive resources.
The depicted hospital scenario is quite common in many industries. Eli Goldratt, a physicist by education, claimed that we wrongly select the top down rules to manage our complex systems and to make decisions. Since the top down plan will fail, we won't be using the critical resources in our system optimally. He suggested an alternative top down rule which he presents in five books. The rule he devised is known as the theory of constraints, and in each book he applies it to different departments within a company. In each department the fundamental concept is to analyze the critical resource from the system perspective and utilize it optimally.
The theory of constraints top down problem-decision rule: always protect the most limited and expensive resource. Protect its time, utilization, and allocation.
In the hospital scenario, the top down rule would translate into constructing the plan around the surgery rooms and expert physicians, making sure that the cleaning staff is always ready before time, catering to the room.
The approach translates into a seemingly surplus of maintenance employees, at times wallowing around the corridors having an extra Latte, and contributing to the financial officer's ulcer. The alternative though is worse, unacceptable mediocre utilization of surgery rooms.
There have been many academic critics of Goldratt's approach. However, most demonstrated that his approach fails in extreme conditions. For most business purposes, Goldratt offers a straight forward, intuitive, top down constraining, problem-decision rule.
An alternative to Goldratt's rule in production environment and in project portfolio management can be to limit the overall time or products that are processed. In other words, limit the WIP - work in process.
How would that rule operate in project portfolio management?
The IT or software departments will only accept new project, when their total work in progress is below a certain threshold. The underlying mechanism is of Pull - new projects are pulled into a work status from a backlog waiting queue based on the total number of projects that are at present, concurrently managed.
The constant work in process is an easier to manage rule, however it is difficult to figure the threshold and to commit to it, without surrendering to requests from top management. More on that, later.
Select a resource constraining top down rule, instead of planning the entire system.
Visual problem presentation
‘If we don't see it it's not there'
We assess the world around us through our eyes.
‘A picture is worth 1000 words'
The fundamental principle is that we rather see a graphical representation rather than a list.
‘Seeing is believing'
Philosophically speaking visual presentations can lead sometimes to mistaken results, however more often they DO enable us to clearly see the overall problem.
Since we use our eyes as the tool to capture the world, it is crucial that we inspect and evaluate decision-problems in the same way.
Visual representations of decision-problems enable us to better grasp, the problem, assumptions, constraints, options and solutions.
Reflect for minutes on the traveling salesperson problem. It's much easier to explore a tangible map of 10, 15 or even 30 destinations and analyze possible routes, rather than assess the problem using a table or spreadsheet.
The same is true for production environments. It is easier to solve the complexity of production machine allocations, using visual signals such as Kanban boards and cards, rather than using a computer-generated paper output of production orders.
One of the challenges we've witnessed in managing multi projects in virtual global companies, is that we lacked the visual representation of the activities and projects allocated to resources and people.
Use any relevant tool to display the decision-problem visually.
For example: During a project at a petrochemical plant, we created a war room for the intense 4 months, construction stage. While we had a detailed Gantt chart with over 2000 entrees for specific activities of construction, it made more sense to create huge visual boards depicting daily tasks with resource and people allocated, to display overall allocations, possible collision points, impacts, deadlines, opportunities, and threats.
The strategic top-down rule has to be shown in the visual representation of the problem. Hence, it is not enough to portray the problem using a visual approach, it is also important to superimpose the strategic top-down rule on the visual presentation of the problem.
How can we illustrate the strategic top-down rule on the visual image?
- Using computers this would be done adding an extra layer on top of the decision problem.
- In our physical war room example this was actualized by different colors, stickers and other visual tools to depict the strategic decision rule visually.
- In production floors this would be achieved by adding physical signals, drawing signs and images around and in front strategic human operators, machines and other facilities within the production floor.
Create a visual representation of the complex decision-problem. Use visual methods to illustrate the top-down strategic decision rule
Two more rules:
- Realignments feedback mechanism
• Enforce consistency through publicity
Are presented in the best seller: D-side - practical decision making business Guide
You will also find there more about decision making, it is a a humoristic practical approach to understanding why decisions are so complex and what can be done about it
The security devil is always in the details of the attack: the ones you've endured, the ones you prepare yourself to fend off, and the ones that, you fear, will catch you completely unaware and defenseless. The Internet of Things (IoT) is nothing if not an endless proliferation of details. It's the vision of a world in which continuous Internet connectivity and addressability is embedded into a growing range of human artifacts, into the natural world, and even into our smartphones, appliances, a...
Dec. 25, 2014 07:00 AM EST Reads: 2,257
Fundamentally, SDN is still mostly about network plumbing. While plumbing may be useful to tinker with, what you can do with your plumbing is far more intriguing. A rigid interpretation of SDN confines it to Layers 2 and 3, and that's reasonable. But SDN opens opportunities for novel constructions in Layers 4 to 7 that solve real operational problems in data centers. "Data center," in fact, might become anachronistic - data is everywhere, constantly on the move, seemingly always overflowing. Net...
Dec. 25, 2014 07:00 AM EST Reads: 1,839
SYS-CON Events announced today that Gridstore™, the leader in hyper-converged infrastructure purpose-built to optimize Microsoft workloads, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Gridstore™ is the leader in hyper-converged infrastructure purpose-built for Microsoft workloads and designed to accelerate applications in virtualized environments. Gridstore’s hyper-converged infrastructure is the ...
Dec. 25, 2014 07:00 AM EST Reads: 1,716
"ElasticBox is an enterprise company that makes it very easy for developers and IT ops to collaborate to develop, build and deploy applications on any cloud - private, public or hybrid," stated Monish Sharma, VP of Customer Success at ElasticBox, in this SYS-CON.tv interview at DevOps Summit, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 25, 2014 06:30 AM EST Reads: 1,717
"Matrix is an ambitious open standard and implementation that's set up to break down the fragmentation problems that exist in IP messaging and VoIP communication," explained John Woolf, Technical Evangelist at Matrix, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 25, 2014 04:45 AM EST Reads: 1,870
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrateg...
Dec. 25, 2014 04:00 AM EST Reads: 1,700
The Internet of Things promises to transform businesses (and lives), but navigating the business and technical path to success can be difficult to understand. In his session at @ThingsExpo, Sean Lorenz, Technical Product Manager for Xively at LogMeIn, demonstrated how to approach creating broadly successful connected customer solutions using real world business transformation studies including New England BioLabs and more.
Dec. 25, 2014 04:00 AM EST Reads: 1,968
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happe...
Dec. 25, 2014 04:00 AM EST Reads: 1,941
An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and asse...
Dec. 25, 2014 03:00 AM EST Reads: 2,266
DevOps is all about agility. However, you don't want to be on a high-speed bus to nowhere. The right DevOps approach controls velocity with a tight feedback loop that not only consists of operational data but also incorporates business context. With a business context in the decision making, the right business priorities are incorporated, which results in a higher value creation. In his session at DevOps Summit, Todd Rader, Solutions Architect at AppDynamics, discussed key monitoring techniques...
Dec. 25, 2014 03:00 AM EST Reads: 1,740
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect...
Dec. 25, 2014 02:30 AM EST Reads: 2,087
The 3rd International @ThingsExpo, co-located with the 16th International Cloud Expo - to be held June 9-11, 2015, at the Javits Center in New York City, NY - announces that it is now accepting Keynote Proposals. The Internet of Things (IoT) is the most profound change in personal and enterprise IT since the creation of the Worldwide Web more than 20 years ago. All major researchers estimate there will be tens of billions devices - computers, smartphones, tablets, and sensors - connected to th...
Dec. 25, 2014 02:00 AM EST Reads: 2,614
What do a firewall and a fortress have in common? They are no longer strong enough to protect the valuables housed inside. Like the walls of an old fortress, the cracks in the firewall are allowing the bad guys to slip in - unannounced and unnoticed. By the time these thieves get in, the damage is already done and the network is already compromised. Intellectual property is easily slipped out the back door leaving no trace of forced entry. If we want to reign in on these cybercriminals, it's hig...
Dec. 25, 2014 02:00 AM EST Reads: 1,653
The definition of IoT is not new, in fact it’s been around for over a decade. What has changed is the public's awareness that the technology we use on a daily basis has caught up on the vision of an always on, always connected world. If you look into the details of what comprises the IoT, you’ll see that it includes everything from cloud computing, Big Data analytics, “Things,” Web communication, applications, network, storage, etc. It is essentially including everything connected online from ha...
Dec. 25, 2014 02:00 AM EST Reads: 2,151
SYS-CON Media announced that Centrify, a provider of unified identity management across cloud, mobile and data center environments that delivers single sign-on (SSO) for users and a simplified identity infrastructure for IT, has launched an ad campaign on Cloud Computing Journal. The ads focus on security: how an organization can successfully control privilege for all of the organization’s identities to mitigate identity-related risk without slowing down the business, and how Centrify provides ...
Dec. 25, 2014 01:00 AM EST Reads: 1,670