Click here to close now.

SYS-CON MEDIA Authors: Liz McMillan, Esmeralda Swartz, Hovhannes Avoyan, Elizabeth White, Adrian Bridgwater

News Feed Item

Cypress Development Announces Phase 2 Drill Program at Its Gunman Zinc and Silver Project in Nevada

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 06/25/14 -- Cypress Development Corp. (TSX VENTURE:CYP) (PINKSHEETS:CYDVF) (FRANKFURT:C1Z) ("Cypress" or the "Company") is pleased to announce its plans for a 2014 Phase 2 exploration and drill program at its 100% owned Gunman zinc-silver oxide project in Nevada. The 1140 acre Gunman zinc-silver project is located directly west of Barrick's Bald Mountain gold mine complex on the southern Carlin mineral trend in White Pine County, Nevada.

Gunman Project Southern Carlin Trend location map:

http://www.cypressdevelopmentcorp.com/s/Image.asp?i=Maps/Gunman-43-101.jpg

Following the a highly successful 2014 Phase 1 exploration and drill program at the Gunman project, Cypress is moving forward with a Phase 2 program. The very high grade zinc and silver drill intercepts returned from Phase 1 drilling at the RH Zone, with new exposures of the mineralization, has led to a conclusion that the spectacular oxide mineralization is likely a high grade polymetallic vein and breccia system and represents a very high quality zinc-silver project located in a very favorable geologic environment.

The 2014 Phase 2 exploration program will focus on three key target areas of the Gunman property in which Phase 1 results have been very encouraging. These three targets are:

Gunman Project zone target map:

http://www.cypressdevelopmentcorp.com/s/Image.asp?i=Maps/Phase-1-Rock-Assays.jpg

1. Delineation drilling at the RH Zone returned long, continuous intervals of very high grade, oxidized zinc and silver mineralization. Highlights include RC hole GMRC-9 which returned a 175 foot down hole interval of 12% zinc and 121 g/t silver and hole GMRC-5 which retuned a 55 foot interval of 21% zinc and 147 g/t silver.

The Phase 2 program will include approximately 10 additional holes along the periphery of the known RH Zone high grade mineralization. The holes will be located in identified block areas which have had no previous drilling.

2. Surface sampling in the Far North Target Area has identified an area of outcropping, silicified limestone conglomerate that contains a well-developed zinc-arsenic and mercury anomaly based on first pass rock chip sampling. In addition, a single sample of leached, weathered rock collected in a dry wash down slope and to the east of this area returned 2.235% zinc. It is likely that this material was eroded from a source area within the northern portion of the property.

The Phase 2 program will include a focused prospecting effort to determine the source of the high grade float sample as well as to provide more detail in the area of the altered, outcropping and anomalous limestone conglomerate.

Five holes are being permitted in the Far North area within the altered outcrop target and in adjacent areas along the interpreted structural zone which connects the Main RH Zone area to the Far North Target area. The Far North Target area lies 6000 feet north of the RH Zone and Cypress views the area as highly prospective due to the results of the Phase 1 program. Discovery of significant bedrock zinc-silver mineralization there would immediately change the scope of the project.

3. Outcropping copper oxide mineralization was sampled during Phase 1 and returned copper assays up to 10% copper along with very high arsenic values. This target area lies 300 feet west of the RH Zone and is known as the TQCU target area.

Gunman Outcropping Copper Oxide Mineralization:

http://www.cypressdevelopmentcorp.com/s/Image.asp?i=/photos/gunman/pic006.jpg

The copper showing has been explored by historical shallow workings and is one segment of a 2500 to 3000 foot long zone of outcropping copper oxide mineralization hosted in a distinctive coarse grained sandstone unit. This copper mineralization flanks the zinc-silver mineralization delineated at the RH and RH South Zones.

Detailed prospecting and mapping of the showings west of the RH Zone will be done in order to target exploration drilling of the outcropping copper oxide mineralization. Two to three holes are planned.

The 2014 Phase 2 program is envisioned to consist of approximately 5000 feet of RC drilling at specific zinc, silver and copper oxide targets covering a 6000 foot strike length as described above. Focused prospecting and mapping will be done in early July. BLM permitting is underway. Cypress anticipates the drill program to start around August 1st.

The Gunman project is hosted by complex veining and brecciation zones localized along generally north-south trending faults. The total strike length containing mineralized positions along this trend is now approximately 9000 feet.

Cypress continues to believe the project represents one of the best exploration targets along the southern extension of the Carlin Trend. There are multiple examples along both the Carlin and Battle Mountain Trends of well mineralized and highly economic zones and mines located in structural environments essentially identical to that at the Gunman project. Specifically, many mines are localized in north-south trending faults zones on both the north and south flanks of these world class mineral belts in north central Nevada.

The 2014 Phase 2 exploration and delineation drill and prospecting program represents another step by Cypress Development along the way to identifying the full extent of the mineralized structural zone at its 100% owned Gunman project.

RH Zone 2014 Phase 1 Results

The assays from the 2014 Phase 1 drilling within the RH Zone are summarized in the table below.

Phase 1 RH Zone Zinc and Silver Assay Results


Hole ID         From (ft)     To (ft)  Interval (ft)    Ag (g/t)      Zn (%)
GMRC-3                 55          95             40        60.3        2.00
----------------------------------------------------------------------------
and                   140         155             15        33.5        3.20
----------------------------------------------------------------------------
GMRC-4                 20         175            155       128.0        7.20
----------------------------------------------------------------------------
including             125         175             50        87.7       17.09
----------------------------------------------------------------------------
including             135         150             15        83.9       30.64
----------------------------------------------------------------------------
GMRC-5                  5         205            200        63.3        8.90
----------------------------------------------------------------------------
including             125         180             55       147.0       21.00
----------------------------------------------------------------------------
including             150         165             15       100.1       32.20
----------------------------------------------------------------------------
GMRC-8                130         185             55        54.3        6.50
----------------------------------------------------------------------------
GMRC-9                 50         225            175       121.0       12.00
----------------------------------------------------------------------------
including             130         215             85       209.2       19.70
----------------------------------------------------------------------------
GMRC-10                55          80             25        24.2        4.60
----------------------------------------------------------------------------
and                   105         120             15         8.0        1.70
----------------------------------------------------------------------------
and                   140         155             15         5.9        1.20
----------------------------------------------------------------------------
and                   170         220             50        20.3        8.70
----------------------------------------------------------------------------
GMRC-11                 0         150            150        18.3        3.10
----------------------------------------------------------------------------
and                   165         215             50       125.6        7.90
----------------------------------------------------------------------------

(i) All intervals above were computed from Chemex assay results of representative, 5 foot interval samples collected from the reverse circulation sample return. All intervals have been selected based on a 1% zinc lower cut-off. The intervals above are restricted to contain no more than one included interval that falls below the 1% zinc lower cut-off. No high grade cut has been applied. All samples were continuously collected from each 5 foot interval during drilling. The samples are large and average approximately 6 kilograms in weight.

(i) g/t = grams per metric tonne.

(i) The true width lengths are estimated to be approximately 65%-75% of down hole intervals.

As the table above indicates, zinc and silver mineralization occurs both as long, highly variable but completely continuous mineralized down hole intervals (Hole GMRC-9 for example) as well as holes with shorter intervals of strong mineralization separated by lower grade intervals (Hole GMRC-10 for example).

RH Zone Geologic Discussion

Evidence from both drilling and surface exposures of the RH Zone strongly suggests that the mineralization is structurally controlled and is focused within an envelope of hydrothermally altered, fractured and brecciated dolomite. Outcrop and drill data also indicate that the dolomite is of hydrothermal origin.

Data gathered during the 2014 Phase 1 drill program points strongly to base metal, precious metal veining within a focused zone of dolomite alteration, fracturing and brecciation forming within an active zone of faulting. Subsequent oxidation of the original poly metallic veining mineralization has produced significant down hole intervals of spectacular, silver rich, zinc and iron oxide gossans with local sulfide cast boxworks.

Robert Marvin, P.Geo., CPG, Exploration Manager for Cypress Development Corp. is the Qualified Person as defined by National Instrument 43-101 and has supervised both the project field work and the preparation of the technical information in this release.

About Cypress Development Corp.:

Cypress Development Corp. is a diversified precious and base metals exploration and development company with properties in Red Lake, Ontario, Canada, and in Nevada, U.S.A. The Company has approximately $1.1 million in its treasury.

To find out more about Cypress Development Corp. (TSX VENTURE:CYP), visit our website at www.cypressdevelopmentcorp.com .

ON BEHALF OF THE BOARD OF DIRECTORS

DONALD C. HUSTON, President

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE CONTENT OF THIS NEWS RELEASE.

This release includes certain statements that may be deemed to be "forward-looking statements". All statements in this release, other than statements of historical facts, that address events or developments that management of the Company expects, are forward-looking statements. Although management believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance, and actual results or developments may differ materially from those in the forward-looking statements. The Company undertakes no obligation to update these forward-looking statements if management's beliefs, estimates or opinions, or other factors, should change. Factors that could cause actual results to differ materially from those in forward-looking statements, include market prices, exploration and development successes, continued availability of capital and financing, and general economic, market or business conditions. Please see the public filings of the Company at www.sedar.com for further information.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
of cloud, colocation, managed services and disaster recovery solutions, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. TierPoint, LLC, is a leading national provider of information technology and data center services, including cloud, colocation, disaster recovery and managed IT services, with corporate headquarters in St. Louis, MO. TierPoint was formed through the strategic combination of some of t...
Public Cloud IaaS started it's life in the developer and startup communities and has grown rapidly to a $20B+ industry, but it still pales in comparison to how much is spent worldwide on IT: $3.6 trillion. In fact, there are 8.6 million data centers worldwide, the reality is many small and medium sized business have server closets and colocation footprints filled with servers and storage gear. While on-premise environment virtualization may have peaked at 75%, the Public Cloud has lagged in ado...
Dave will share his insights on how Internet of Things for Enterprises are transforming and making more productive and efficient operations and maintenance (O&M) procedures in the cleantech industry and beyond. Speaker Bio: Dave Landa is chief operating officer of Cybozu Corp (kintone US). Based in the San Francisco Bay Area, Dave has been on the forefront of the Cloud revolution driving strategic business development on the executive teams of multiple leading Software as a Services (SaaS) ap...
SYS-CON Media announced today that @WebRTCSummit Blog, the largest WebRTC resource in the world, has been launched. @WebRTCSummit Blog offers top articles, news stories, and blog posts from the world's well-known experts and guarantees better exposure for its authors than any other publication. @WebRTCSummit Blog can be bookmarked ▸ Here @WebRTCSummit conference site can be bookmarked ▸ Here
While not quite mainstream yet, WebRTC is starting to gain ground with Carriers, Enterprises and Independent Software Vendors (ISV’s) alike. WebRTC makes it easy for developers to add audio and video communications into their applications by using Web browsers as their platform. But like any market, every customer engagement has unique requirements, as well as constraints. And of course, one size does not fit all. In her session at WebRTC Summit, Dr. Natasha Tamaskar, Vice President, Head of C...
ProfitBricks, the provider of painless cloud infrastructure IaaS, today released its SDK for Ruby, written against the company's new RESTful API. The new SDK joins ProfitBricks' previously announced support for the popular multi-cloud open-source Fog project. This new Ruby SDK, which exposes advanced functionality to take advantage of ProfitBricks' simplicity and productivity, aligns with ProfitBricks' mission to provide a painless way to automate infrastructure in the cloud. Ruby is a genera...
SYS-CON Events announced today that GENBAND, a leading developer of real time communications software solutions, has been named “Silver Sponsor” of SYS-CON's WebRTC Summit, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. The GENBAND team will be on hand to demonstrate their newest product, Kandy. Kandy is a communications Platform-as-a-Service (PaaS) that enables companies to seamlessly integrate more human communications into their Web and mobile applicatio...
SYS-CON Events announced today that BroadSoft, the leading global provider of Unified Communications and Collaboration (UCC) services to operators worldwide, has been named “Gold Sponsor” of SYS-CON's WebRTC Summit, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BroadSoft is the leading provider of software and services that enable mobile, fixed-line and cable service providers to offer Unified Communications over their Internet Protocol networks. The Compa...
ProfitBricks, the provider of painless cloud infrastructure for IaaS, today announced the release of a Node.js SDK written against its recently launched REST API. This new JavaScript based library provides coverage for all existing ProfitBricks REST API functions. With additional libraries set to release this month, ProfitBricks continues to prove its dedication to the DevOps community and commitment to making cloud migrations and cloud management painless. Node.js is an open source, cross-pl...
The IoT Bootcamp is coming to Cloud Expo | @ThingsExpo on June 9-10 at the Javits Center in New York. Instructor. Registration is now available at http://iotbootcamp.sys-con.com/ Instructor Janakiram MSV previously taught the famously successful Multi-Cloud Bootcamp at Cloud Expo | @ThingsExpo in November in Santa Clara. Now he is expanding the focus to Janakiram is the founder and CTO of Get Cloud Ready Consulting, a niche Cloud Migration and Cloud Operations firm that recently got acquir...
SYS-CON Events announced today the DevOps Foundation Certification Course, being held June ?, 2015, in conjunction with DevOps Summit and 16th Cloud Expo at the Javits Center in New York City, NY. This sixteen (16) hour course provides an introduction to DevOps – the cultural and professional movement that stresses communication, collaboration, integration and automation in order to improve the flow of work between software developers and IT operations professionals. Improved workflows will res...
The 17th International Cloud Expo has announced that its Call for Papers is open. 17th International Cloud Expo, to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, APM, APIs, Microservices, Security, Big Data, Internet of Things, DevOps and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding bu...
So I guess we’ve officially entered a new era of lean and mean. I say this with the announcement of Ubuntu Snappy Core, “designed for lightweight cloud container hosts running Docker and for smart devices,” according to Canonical. “Snappy Ubuntu Core is the smallest Ubuntu available, designed for security and efficiency in devices or on the cloud.” This first version of Snappy Ubuntu Core features secure app containment and Docker 1.6 (1.5 in main release), is available on public clouds, ...
The 5th International DevOps Summit, co-located with 17th International Cloud Expo – being held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the...
ProfitBricks has launched its new DevOps Central and REST API, along with support for three multi-cloud libraries and a Python SDK. This, combined with its already existing SOAP API and its new RESTful API, moves ProfitBricks into a position to better serve the DevOps community and provide the ability to automate cloud infrastructure in a multi-cloud world. Following this momentum, ProfitBricks has also introduced several libraries that enable developers to use their favorite language to code ...