|By Business Wire||
|July 15, 2014 06:01 AM EDT||
Efficient Power Conversion Corporation (EPC) today announces the immediate availability of a complete demonstration wireless power transfer kit. The 40 V (EPC9111) or 100 V (EPC9112) wireless kits have three components:
- Source (or amplifier) board
- Class 3 A4WP compliant source (or transmit) coil
- Category 3 A4WP compliant device (or receiving) board including coil
The system is capable of delivering up to 35 W into a DC load while operating at 6.78 MHz (the lowest ISM band). The purpose of this demonstration kit is to simplify the evaluation process of using eGaN FETs for highly efficient wireless power transfer. The EPC9111 and EPC9112 utilize the high frequency switching capability of EPC gallium nitride transistors to facilitate wireless power systems with greater than 75% efficiency.
Value of eGaN FETs in Wireless Power Transfer Systems
The requirements of wireless energy transfer systems include high efficiency, low profile, robustness to changing operating conditions and, in some cases, light weight. These requirements translate into designs that need to be efficient and able to operate at high switching speeds without a bulky heatsink. Furthermore the design must be able to operate over a wide range of coupling and load variations. The fast switching capability of eGaN FETs is ideal for highly resonant power transfer applications.
The popularity of highly resonant wireless power transfer is increasing rapidly, particularly for applications targeting portable device charging. The end applications are varied and evolving quickly from mobile device charging, to life-extending medical implementations, to safety-critical hazardous environments.
Source (Amplifier) Board
The source board is configured in an optional half-bridge topology (for single-ended configuration) or default full-bridge topology (for differential configuration), and include the gate driver(s) and oscillator that ensure operation of the system at 6.78 MHz.
Source (Transmit) Coil
The source coil, as well as the device coil, are Rezence (A4WP) compliant and have been pre-tuned to operate at 6.78 MHz. The source coil is class 3 and the device coil is category 3 compliant.
Device (Receiving) Board including Coil
The device board includes a high frequency Schottky diode based full-bridge rectifier and output filter to deliver a filtered unregulated DC voltage. The device board comes equipped with two LED’s, one to indicate the power is being received and a second LED, which indicates that the output voltage has reached the maximum and is above 37 V. The device board can also be configured as a half-bridge rectifier that allows for double output voltage operation.
Price and Availability
If you are interested in learning more about designing with eGaN FETs for wireless energy transfer, a visit by an EPC field application engineer can be scheduled by contacting EPC at http://epc-co.com/epc/Contact/RequestMeeting.aspx
Additional application and design information for EPC eGaN FETs is available through the following resources:
- Wireless Power Transfer: http://epc-co.com/epc/Applications/WirelessPower.aspx
- Applications Support: http://epc-co.com/epc/DesignSupport.aspx
- Products: http://epc-co.com/epc/Products/eGaNFETs.aspx
EPC is the leader in enhancement mode gallium nitride based power management devices. EPC was the first to introduce enhancement-mode gallium-nitride-on-silicon (eGaN) FETs as power MOSFET replacements in applications such as DC-DC converters, wireless power transfer, envelope tracking, RF transmission, solar micro inverters, remote sensing technology (LiDAR), and class-D audio amplifiers with device performance many times greater than the best silicon power MOSFETs.
Visit our web site: www.epc-co.com
Sign-up to receive EPC updates via email: http://bit.ly/EPCupdates
or text "EPC" to 22828
Follow EPC on Twitter at http://twitter.com/#!/EPC_CORP
Like EPC on Facebook at http://www.facebook.com/EPC.Corporation
eGaN is a registered trademark of Efficient Power Conversion Corporation, Inc.
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective ...
Nov. 26, 2014 11:45 PM EST Reads: 1,016
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happe...
Nov. 26, 2014 11:30 PM EST Reads: 907
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrateg...
Nov. 26, 2014 09:00 PM EST Reads: 983
We are reaching the end of the beginning with WebRTC, and real systems using this technology have begun to appear. One challenge that faces every WebRTC deployment (in some form or another) is identity management. For example, if you have an existing service – possibly built on a variety of different PaaS/SaaS offerings – and you want to add real-time communications you are faced with a challenge relating to user management, authentication, authorization, and validation. Service providers will w...
Nov. 26, 2014 07:00 PM EST Reads: 984
Cultural, regulatory, environmental, political and economic (CREPE) conditions over the past decade are creating cross-industry solution spaces that require processes and technologies from both the Internet of Things (IoT), and Data Management and Analytics (DMA). These solution spaces are evolving into Sensor Analytics Ecosystems (SAE) that represent significant new opportunities for organizations of all types. Public Utilities throughout the world, providing electricity, natural gas and water,...
Nov. 26, 2014 06:00 PM EST Reads: 988
"Matrix is an ambitious open standard and implementation that's set up to break down the fragmentation problems that exist in IP messaging and VoIP communication," explained John Woolf, Technical Evangelist at Matrix, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Nov. 26, 2014 05:45 PM EST Reads: 934
Want to enable self-service provisioning of application environments in minutes that mirror production? Can you automatically provide rich data with code-level detail back to the developers when issues occur in production? In his session at DevOps Summit, David Tesar, Microsoft Technical Evangelist on Microsoft Azure and DevOps, will discuss how to accomplish this and more utilizing technologies such as Microsoft Azure, Visual Studio online, and Application Insights in this demo-heavy session.
Nov. 26, 2014 04:45 PM EST Reads: 656
When an enterprise builds a hybrid IaaS cloud connecting its data center to one or more public clouds, security is often a major topic along with the other challenges involved. Security is closely intertwined with the networking choices made for the hybrid cloud. Traditional networking approaches for building a hybrid cloud try to kludge together the enterprise infrastructure with the public cloud. Consequently this approach requires risky, deep "surgery" including changes to firewalls, subnets...
Nov. 26, 2014 04:45 PM EST Reads: 649
DevOps is all about agility. However, you don't want to be on a high-speed bus to nowhere. The right DevOps approach controls velocity with a tight feedback loop that not only consists of operational data but also incorporates business context. With a business context in the decision making, the right business priorities are incorporated, which results in a higher value creation. In his session at DevOps Summit, Todd Rader, Solutions Architect at AppDynamics, discussed key monitoring techniques...
Nov. 26, 2014 04:45 PM EST Reads: 659
The Internet of Things will greatly expand the opportunities for data collection and new business models driven off of that data. In her session at @ThingsExpo, Esmeralda Swartz, CMO of MetraTech, discussed how for this to be effective you not only need to have infrastructure and operational models capable of utilizing this new phenomenon, but increasingly service providers will need to convince a skeptical public to participate. Get ready to show them the money!
Nov. 26, 2014 04:00 PM EST Reads: 1,020
One of the biggest challenges when developing connected devices is identifying user value and delivering it through successful user experiences. In his session at Internet of @ThingsExpo, Mike Kuniavsky, Principal Scientist, Innovation Services at PARC, described an IoT-specific approach to user experience design that combines approaches from interaction design, industrial design and service design to create experiences that go beyond simple connected gadgets to create lasting, multi-device exp...
Nov. 26, 2014 03:45 PM EST Reads: 988
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect...
Nov. 26, 2014 02:00 PM EST Reads: 1,473
High-performing enterprise Software Quality Assurance (SQA) teams validate systems that are ready for use - getting most actively involved as components integrate and form complete systems. These teams catch and report on defects, making sure the customer gets the best software possible. SQA teams have leveraged automation and virtualization to execute more thorough testing in less time - bringing Dev and Ops together, ensuring production readiness. Does the emergence of DevOps mean the end of E...
Nov. 25, 2014 11:30 PM EST Reads: 1,141
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using ...
Nov. 25, 2014 09:30 PM EST Reads: 1,229
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series dat...
Nov. 25, 2014 09:30 PM EST Reads: 1,281