Click here to close now.

SYS-CON MEDIA Authors: Carmen Gonzalez, Kevin Jackson, Peter Silva, Greg Wind, Glenn Rossman

News Feed Item

MAG Silver Reports Additional Silver-Copper and Pervasive Zinc Mineralization at Canasil's Salamandra Project in Durango State, Mexico

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 07/21/14 -- Canasil Resources Inc. (TSX VENTURE:CLZ) (FRANKFURT:3CC) ("Canasil" or the Company) announces that MAG Silver Corp. (TSX:MAG) (NYSE MKT:MVG) ("MAG") has released assay results from MAG's twelve hole, 6,500 metre Phase 2 drill program on Canasil's Salamandra Silver-Copper-Zinc-Lead Project in Durango State, Mexico. Drilling began in late February of 2014 and concluded in May 2014. The Phase 1 drill program results were released on March 17, 2014, and combined with the Phase 2 program MAG has now drilled 10,112 metres in 17 drill holes on the Salamandra project, complementing the initial 12 drill holes previously drilled by Canasil.

George Paspalas, MAG President and CEO, commented: "Salamandra continues to show structurally-controlled and broad pervasive multi-stage mineralization almost everywhere we drill. We are beginning to understand the geometry of the mineralization controls in some areas and hope that combining the drill results with the existing geophysics will help us zero in on areas with high-grade polymetallic skarn and CRD mineralization."

MAG's Phase 2 drill program consisted of five follow-up holes (SA 14-19, 20, 22, 24, 29) designed to determine the geometry of the best holes drilled in Phase 1 (SA13-13, and SA14-15), plus seven exploration holes testing geological, geochemical and geophysical anomalies around the previously undrilled half of the circumference of the district's central intrusive complex. To date, 15 of MAG's 17 total holes have cut appreciable widths of strongly anomalous zinc mineralization, leaving the entire system prospective for further drilling. The drill results will now be used to refine earlier interpretation of extensive Canasil airborne and ground geophysical data prior to Phase 3 drilling.

The best follow-up hole is SA-20, which cut 0.63 metres grading 258 grams per tonne ("gpt") (7.5 ounces per ton ("opt")) silver with 0.27% copper lying immediately above 9.9 metres grading 2.3% zinc (see Table 1). These values and relative position are very similar to that seen 380 metres deeper in SA14-15 and appear to reflect the same mineralized zone. Hole SA-22, also drilled to off-set Hole 15, cut several zinc-rich zones but appears to have been drilled above and parallel to the mineralized zone cut in Holes 15 and 20. Similarly, the first two of the three follow-up holes (SA14-19, 24 and 29) drilled to offset the broad zinc-zone cut in Hole SA13-13 each cut significant widths of zinc mineralization but the intercept geometries prevent correlation.

The seven exploration holes tested the remaining previously undrilled half of the circumference of the intrusive center. Hole SA14-28 was the best of these exploration holes, cutting 173.46 metres of 1.0% zinc mineralization starting 20 metres below the surface. Holes SA14-19, 20, 21, 22, 24 and 25 also hit notable widths of zinc mineralization. Drill holes SA14-25 and SA14-18, were drilled away from the intrusive centre to test under the recent basalt flows that flank the entire project area; both cut major faults interpreted to be the reactivated western margin of the Central Mexico Basin, the principal regional structural control on several major CRD-skarn systems.


               Table 1: Assay Results - Phase 2 Drill Program               
                                                                            
----------------------------------------------------------------------------
Hole-ID         From       To  Interval     Au     Ag     Ag    Cu   Zn   Pb
            ----------------------------------------------------------------
            (metres) (metres)  (metres)  (g/t)  (g/t)  (opt) (ppm)  (%)  (%)
----------------------------------------------------------------------------
SA14-18       214.53   214.83      0.30   0.01      2    0.1   139  1.6  0.0
----------------------------------------------------------------------------
SA14-19       128.87   130.22      1.35   0.00     59    1.7    31  0.9  1.1
----------------------------------------------------------------------------
and           349.87   388.36     37.99   0.01      1    0.0   219  1.6  0.0
----------------------------------------------------------------------------
SA14-20         8.14    28.35     20.21   0.00     12    0.4   309  1.0  0.4
----------------------------------------------------------------------------
and           305.45   306.08      0.63   0.04    258    7.5  2736  0.4  3.7
----------------------------------------------------------------------------
and           307.32   318.11     10.79   0.01      8    0.2   156  2.3  0.3
----------------------------------------------------------------------------
SA14-21       208.00   221.95     13.95   0.02      4    0.1   437  2.0  0.0
----------------------------------------------------------------------------
and           262.30   299.00     36.70   0.00     12    0.4  3239  0.4  0.0
----------------------------------------------------------------------------
SA14-22        12.66    22.36      9.70   0.00     16    0.5   148  0.8  0.3
----------------------------------------------------------------------------
and           110.65   173.04     62.39   0.01      2    0.1    88  0.8  0.0
----------------------------------------------------------------------------
including     110.65   114.38      3.73   0.00      4    0.1   185  3.2  0.0
----------------------------------------------------------------------------
and           163.12   173.04      9.92   0.03      2    0.1   154  2.0  0.0
----------------------------------------------------------------------------
SA14-23                           No Significant Values                     
----------------------------------------------------------------------------
SA14-24       231.30   300.20     68.90   0.00      1    0.0   210  0.8  0.0
----------------------------------------------------------------------------
including     281.54   299.09     17.55   0.00      1    0.0   188  1.5  0.0
----------------------------------------------------------------------------
including     293.76   299.09      5.33   0.00      1    0.0   261  3.0  0.0
----------------------------------------------------------------------------
and           300.20   304.90      4.70   0.00     39    1.1  2712  0.1  0.0
----------------------------------------------------------------------------
SA14-25       113.00   143.51     30.51   0.00     25    0.7   164  0.8  0.4
----------------------------------------------------------------------------
including     121.36   126.73      5.37   0.00     41    1.2   225  1.7  0.7
----------------------------------------------------------------------------
including     138.58   143.51      4.93   0.00     77    2.3   286  1.9  1.3
----------------------------------------------------------------------------
SA14-26                           No Significant Values                     
----------------------------------------------------------------------------
SA14-27       358.40   366.00      7.60   0.01      2    0.1   278  2.2  0.2
----------------------------------------------------------------------------
including     358.40   360.68      2.28   0.01      5    0.1   444  3.5  0.2
----------------------------------------------------------------------------
including     364.12   366.00      1.88   0.02      2    0.1   462  4.4  0.4
----------------------------------------------------------------------------
SA14-28        19.90   193.36    173.46   0.00      4    0.1    80  1.0  0.1
----------------------------------------------------------------------------
including     161.54   185.96     24.42   0.01     10    0.3   204  2.2  0.2
----------------------------------------------------------------------------
SA14-29       108.77   109.07      0.30   0.00     53    1.5   237  3.3  1.5
----------------------------------------------------------------------------

About Salamandra;

Salamandra appears to be a typical Mexican Carbonate Replacement/Skarn Deposit ("CRD") and is very similar to MAG's Cinco de Mayo Project; the same exploration model that drove successful exploration there is being applied to Salamandra. Salamandra lies 80 kilometres northwest of Mexico's largest known silver-lead-zinc CRD-skarn deposit, the Sabinas-San Martin District. Both Salamandra and Sabinas-San Martin are favorably positioned at the intersection of the Mexican CRD Belt (that also hosts MAG's Cinco de Mayo CRD project) and the Fresnillo Trend (that hosts MAG's Juanicipio Project). Previous drilling at Salamandra by Canasil (Holes SA1-12) was undertaken in a limited area characterized by medium to high-grade zinc mineralization. MAG's exploration program was designed to probe and develop a better understanding of the scope and size of the system and development of exploration vectors, so drilling focused on targets 200 to 2000 metres from previous drilling. Targets included mineralized intrusive breccias, dike swarms and mineralized structures revealed by MAG's detailed geologic mapping, geochemical sampling, and reinterpretation of Canasil geophysics. The Canasil geophysics will be reinterpreted again in the light of MAG's Stage 1 and 2 drilling results before Phase 3 drilling is undertaken.

MAG Silver-Canasil Option Agreement:

In May 2013, MAG entered into an option agreement with Canasil whereby MAG can earn up to a 70% interest in Canasil's 14,719 hectare Salamandra property (News Release dated May 28, 2013). For the initial earn-in of a 55% interest, MAG must complete C$5.5 million in exploration expenditures on the property (C$2,677,519 incurred to March 31, 2014) and make total cash payments to Canasil of C$750,000 (C$300,000 paid to date) during the first option term to May 28, 2017. MAG can earn an additional 15% by producing either a feasibility study or spending an additional C$20 million over an additional four year period.

Qualified Person, Quality Assurance and Control: These results have been compiled and provided by MAG; for details regarding the Qualified Person and Quality Assurance and Control procedures, please refer to the MAG news release dated July 21, 2014, covering these results.

About Canasil:

Canasil is a Canadian mineral exploration company with a strong portfolio of 100% owned silver-gold-copper-lead-zinc projects in Durango, Sinaloa and Zacatecas States, Mexico, and in British Columbia, Canada. The Company's directors and management include industry professionals with a track record of identifying and advancing successful mineral exploration projects through to discovery and further development. The Company is actively engaged in the exploration of its mineral properties, and maintains an operating subsidiary in Durango, Mexico, with full time geological and support staff for its operations in Mexico.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

A map is available at the following address: http://media3.marketwire.com/docs/958528a.pdf.

Contacts:
Canasil Resources Inc.
Bahman Yamini
President and C.E.O.
(604) 709-0109
www.canasil.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
SYS-CON Events announced today that Cisco, the worldwide leader in IT that transforms how people connect, communicate and collaborate, has been named “Gold Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Cisco makes amazing things happen by connecting the unconnected. Cisco has shaped the future of the Internet by becoming the worldwide leader in transforming how people connect, communicate and collaborat...
WSM International is launching a DevOps services division that offers assessment, consulting and implementation to large enterprises and organizations with complex infrastructures. This is the first independent services company to create a dedicated practice to help organizations looking to transition to the DevOps model. The concept of DevOps is to blend information technology (IT) software development with operations to optimize the computing infrastructure according to the specific needs of ...
SYS-CON Events announced today that robomq.io will exhibit at SYS-CON's @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. robomq.io is an interoperable and composable platform that connects any device to any application. It helps systems integrators and the solution providers build new and innovative products and service for industries requiring monitoring or intelligence from devices and sensors.
The WebRTC Summit 2014 New York, to be held June 9-11, 2015, at the Javits Center in New York, NY, announces that its Call for Papers is open. Topics include all aspects of improving IT delivery by eliminating waste through automated business models leveraging cloud technologies. WebRTC Summit is co-located with 16th International Cloud Expo, @ThingsExpo, Big Data Expo, and DevOps Summit.
Temasys has announced senior management additions to its team. Joining are David Holloway as Vice President of Commercial and Nadine Yap as Vice President of Product. Over the past 12 months Temasys has doubled in size as it adds new customers and expands the development of its Skylink platform. Skylink leads the charge to move WebRTC, traditionally seen as a desktop, browser based technology, to become a ubiquitous web communications technology on web and mobile, as well as Internet of Things...
Hosted PaaS providers have given independent developers and startups huge advantages in efficiency and reduced time-to-market over their more process-bound counterparts in enterprises. Software frameworks are now available that allow enterprise IT departments to provide these same advantages for developers in their own organization. In his workshop session at DevOps Summit, Troy Topnik, ActiveState’s Technical Product Manager, will show how on-prem or cloud-hosted Private PaaS can enable organ...
DevOps tasked with driving success in the cloud need a solution to efficiently leverage multiple clouds while avoiding cloud lock-in. Flexiant today announces the commercial availability of Flexiant Concerto. With Flexiant Concerto, DevOps have cloud freedom to automate the build, deployment and operations of applications consistently across multiple clouds. Concerto is available through four disruptive pricing models aimed to deliver multi-cloud at a price point everyone can afford.
Today, IT is not just a cost center. IT is an enabler and driver of business. With the emergence of the hybrid cloud paradigm, IT now has increasingly more capabilities to create new strategic opportunities for a business. Hybrid cloud allows an organization to utilize multi-tenant public clouds, dedicated private clouds, bare metal hosting, and the associated support and services for the right use cases through an on-demand, XaaS model. This model of IT creates tremendous opportunities for busi...
Docker is an excellent platform for organizations interested in running microservices. It offers portability and consistency between development and production environments, quick provisioning times, and a simple way to isolate services. In his session at DevOps Summit at 16th Cloud Expo, Shannon Williams, co-founder of Rancher Labs, will walk through these and other benefits of using Docker to run microservices, and provide an overview of RancherOS, a minimalist distribution of Linux designed...
Business as usual for IT is evolving into a “Make or Buy” decision on a service-by-service conversation with input from the LOBs. How does your organization move forward with cloud? In his general session at 16th Cloud Expo, Paul Maravei, Regional Sales Manager, Hybrid Cloud and Managed Services at Cisco, discusses how Cisco and its partners offer a market-leading portfolio and ecosystem of cloud infrastructure and application services that allow you to uniquely and securely combine cloud busi...
Wearable technology was dominant at this year’s International Consumer Electronics Show (CES) , and MWC was no exception to this trend. New versions of favorites, such as the Samsung Gear (three new products were released: the Gear 2, the Gear 2 Neo and the Gear Fit), shared the limelight with new wearables like Pebble Time Steel (the new premium version of the company’s previously released smartwatch) and the LG Watch Urbane. The most dramatic difference at MWC was an emphasis on presenting we...
Businesses are looking to empower employees and departments to do more, go faster, and streamline their processes. For all workers – but mobile workers especially – utilizing the cloud to reconnect documents and improve processes without destructing existing workflows can have a dramatic impact on productivity. In his session at 16th Cloud Expo, Mark Grilli, vice president of Acrobat Solutions marketing at Adobe Systems Incorporated, will outline new ways that the cloud is changing the way peo...
SYS-CON Events announced today that Vitria Technology, Inc. will exhibit at SYS-CON’s @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Vitria will showcase the company’s new IoT Analytics Platform through live demonstrations at booth #330. Vitria’s IoT Analytics Platform, fully integrated and powered by an operational intelligence engine, enables customers to rapidly build and operationalize advanced analytics to deliver timely business outcomes ...
Are your applications getting in the way of your business strategy? It’s time to rethink your IT approach. In his session at 16th Cloud Expo, Madhukar Kumar, Vice President, Product Management at Liaison Technologies, will discuss a new data-centric approach to IT that allows your data, not applications, to inform business strategy. By moving away from an application-centric IT model where data integration and analysis are subservient to the constraints of applications, your organization will b...
WSM International has launched a DevOps services division that offers assessment, consulting and implementation to large enterprises and organizations with complex infrastructures. The concept of DevOps is to blend information technology (IT) software development with operations to optimize the computing infrastructure according to the specific needs of the organization. According to a recent press release from Gartner, "By 2016, DevOps will evolve from a niche strategy employed by large cloud ...