Click here to close now.

SYS-CON MEDIA Authors: Liz McMillan, Pat Romanski, William Schmarzo, Elizabeth White, Carmen Gonzalez

News Feed Item

Condor Gold Trench Results Identify Large Gold Footprint and Potential Feeder Pit

LONDON, ENGLAND -- (Marketwired) -- 08/19/14 -- Condor Gold plc ("Condor" or "the Company") - Results for 2646m Trenching at Real de La Cruz, La India Project, Nicaragua

Large Gold Footprint Suggests Top of a Gold System

Condor (AIM: CNR) has completed an initial trench sampling programme on the Real de La Cruz Prospect, La India Project, Nicaragua. Assay results delineate a broad low-grade gold mineralised stockwork zone of 1100m strike length and up to 100m width, which has potential to be a third feeder pit to the plant planned by the nearby La India Open Pit Resource. Real de La Cruz has high level geological characteristics that point to the potential for higher-grade mineralisation at depth, as is evidenced by a high-grade breccia within an incised portion of the prospect.

Highlights of Exploration Trenching:


--  13 trenches for 2,646m at Real de La Cruz demonstrate a wide zone of
    low-grade stockwork gold mineralisation along an 1100m strike length
    including:
    --  A core zone of 200m strike length by 40m to 65m width averaging
        circa 1g/t gold
    --  An inner zone of 500m strike length by 20 to 60m width averaging
        over 0.5g/t gold
    --  An outer halo of at least 1100m strike length by up to 100m width at
        over 0.2g/t gold
--  Artisanal miners recently excavated a small open pit to access a high-
    grade breccia that returned an intercept of 4m true width quartz breccia
    at 16.4g/t gold.
--  Gold mineralisation open in all directions and at depth.
--  Potential supplementary low-grade feeder pit located only 8km from plant
    planned for La India Open Pit Resource.
--  Large gold footprint with high level vein textures suggests the top of
    the system.

Mark Child, Chairman and CEO commented:

"It is highly encouraging that Condor's geologists have defined a large area of gold mineralisation through limited trenching on the Real de La Cruz Concession on La India Project. These trench results endorse Condor's strategy of continuing to explore the considerable upside potential of La India Gold District while fast tracking the main La India Open Pit Resource of 921,000 oz at 3.0g/t gold to production. Condor's geologists interpret the geological signatures as representing the top of a much larger gold mineralised system that, with further trenching and drilling, has the potential to develop into a supplementary lower-grade feeder pit to the La India process plant located 8km to the southwest."

Condor has completed 13 trenches for 2,646m using a mechanical excavator to test wide low-grade gold mineralised stockwork zones on the 100% owned Real de La Cruz Concession, part of the La India Project concession package. Gold mineralisation at Real de La Cruz covers a large surface area on the flank and summit of a hill that rises 100m above the surrounding plains. Previous explorer, Newmont Mining, mapped out a 1100m by 900m gold anomalous area through soil auger, rock chip and trench sampling in 2001-2002. Condor has validated and extended the Newmont trenching: Condor trenches are up to 600m long at 200m spacing along an 1100m strike length. The programme was designed to better establish the extent of in situ surface gold mineralisation and obtain a first pass broad view of the grade distribution. See trench results in Table 1 and maps in Figures 1 and 2.

Trench sampling and mapping has confirmed and extended the wide zones of low-grade gold mineralisation identified by the previous explorer. The gold is contained within wide zones of stockwork veins and veinlets, individual veins typically ranging from a few millimetres to tens of centimetres thick at 1-2m vein spacing, and also in wider quartz breccias up to 4m thick. The stockwork and breccia veins are hosted by a felsic lava dome. Three main structural vein orientations are recognised; 090 degrees, 110 degrees and 040 degrees. Vein textures such as banded and bladed quartz indicate at least one phase of mineralisation in the boiling zone. Boiling textures in quartz veins are found throughout the area, but are most abundant in the vicinity of the highest grade trenches in the centre of the area where erosion has incised the dome, possibly exposing lower levels of gold mineralisation. High level vein textures such as opaline quartz, recognised near the summit of the hill in the eastern area of the surface gold anomaly, suggests a high level gold mineralised hydrothermal system.

The width and grade of the gold mineralisation improves towards a central zone where artisanal miners recently excavated a small open pit to access a high-grade breccia, which returned an intercept of 4m true width quartz breccia at 16.4g/t gold (see RNS announcement dated 12th June 2014). Condor's wide spaced trench programme has defined three zones to the surface gold mineralisation (see Figure 2 below):


1.  a core zone over at least 200m strike length of approximately 40-65m
    width averaging approximately 1g/t gold and including a northeast-
    striking 4m true width quartz breccia grading at 16.4g/t gold exposed in
    an artisanal pit wall,
2.  a broader inner halo over at least 500m strike length of 20-60m width
    averaging over 0.5g/t gold and
3.  an outer halo averaging over 0.2g/t gold extends the strike to at least
    1,100m, with the width varying from 7m at the flanks to 100m at the
    core.

The trenching completed to date is considered a first pass test only. Gold mineralisation remains open in all directions where steep slopes or alluvial cover over 2m deep made trench sampling impractical. Isolated gold mineralised outcrops outside of the trench-tested area suggest that there is more near surface gold mineralisation to be discovered. In addition, the 200m spacing employed across the area will require infill trenching to confidently define the variations in grade and width prior to drill testing.

Table 1. Assay results of wide-spaced trench sampling at Real de La Cruz


----------------------------------------------------------------------------
Prospect   Trench ID      From     To  Width     True     Au    Ag  Comments
                                             width(i)  (g/t) (g/t)
----------------------------------------------------------------------------
                                                                      quartz
Pit Wall   RCTR003       26.00  34.00   8.00      4.0  16.36  6.84   breccia
----------------------------------------------------------------------------
Core Zone  RCTR004       13.40  77.00  63.60     63.6   1.01   0.4
                       -----------------------------------------------------
                         89.00 103.00  14.00     14.0   0.58   0.7
----------------------------------------------------------------------------
Core Zone  RCTR007       62.80 169.00 106.20    106.2   0.56   0.2
                       -----------------------------------------------------
                        221.40 258.00   36.6     36.6   0.29   0.1
----------------------------------------------------------------------------
                                                              less
                                                              than
Inner Zone RCTR008        0.00   8.00   8.00      8.0   0.66   0.1
                       -----------------------------------------------------
                         34.00  55.00  21.00     21.0   0.28   0.2
           -----------------------------------------------------------------
           RCTR008B      35.00  40.00   5.00      5.0   0.74   0.2
           -----------------------------------------------------------------
           RCTR008C      36.25  54.00  18.80     18.8   0.54   0.3
----------------------------------------------------------------------------
                                                                     Newmont
Inner Zone NDR6846-936  142.00 172.00  30.00     30.0   0.95     -      data
           -----------------------------------------------------------------
           RCTR009        0.00  24.40  24.40     24.4   0.62   0.8
                       -----------------------------------------------------
                         65.00  75.00  10.00     10.0   0.55   0.4
                       -----------------------------------------------------
                         81.40  87.50   6.10      6.1   0.37   2.6
----------------------------------------------------------------------------
Outer Zone RCTR010       82.40  83.00   0.60      0.6   2.14   0.8
                       -----------------------------------------------------
                        190.00 192.00   2.00      2.0   4.55   1.6
                       -----------------------------------------------------
                        283.70 288.20   4.50      4.5   1.03   3.1
----------------------------------------------------------------------------
Outer Zone RCTR011        3.00  15.00  12.00     12.0   0.13   0.1
                       -----------------------------------------------------
                         32.00  53.00  21.00     21.0   0.18   0.3
                       -----------------------------------------------------
                         70.00  82.00  12.00     12.0   0.20   0.4
                       -----------------------------------------------------
                        154.00 156.40   2.40      2.4   0.98   3.2
           -----------------------------------------------------------------
                                                                     Newmont
           NDR6330-84    38.00  70.00  32.00     32.0   0.60     -      data
----------------------------------------------------------------------------
                                                              less
                                                              than
Outer Zone RCTR013       87.50  97.20   9.70      6.9   0.24   0.1
----------------------------------------------------------------------------
                                                              less
                                                              than
Outer Zone RCTR014       31.00  36.90   5.90      5.7   0.61   0.1
----------------------------------------------------------------------------

In conclusion

The definition of broad zones of near-surface gold mineralisation at over 0.5g/t gold along a 500m strike length, referred to as the core and inner zones, has the potential to provide low-grade supplemental feed to the proposed La India Open Pit Mine plant located only 8km away. Pre-feasibility studies are at an advanced stage on La India Open Pit Resource, where the base case envisages production of circa 80,000 oz gold per annum.

The large footprint and localised zones of wide high-grade gold mineralisation is encouraging. The recognition of quartz vein textures indicative of both high level and boiling zone mineralisation suggests an extremely active system. The artisanal miner's small open pit has provided access to a high-grade breccia which returned an intercept of 4m true width quartz breccia at 16.4g/t gold is exciting and requires further geological investigation. Condor considers that the large low-grade footprint at Real de La Cruz could be the top of a large mineralised system.

Step-out soil sampling and further infill and extension trenching is planned to better define the surface mineralisation prior to drill testing for continuity to depth. Additional geological, geochemical and mineralogical studies will improve understanding of the system and guide further exploration of potential higher-grade mineralisation at deeper levels.

To view Figure 1 and Figure 2, please visit the following link: http://media3.marketwire.com/docs/Figures-CNR.pdf.

Competent Person's Declaration

The information in this announcement that relates to the mineral potential, geology, Exploration Results and database is based on information compiled by and reviewed by Dr Luc English, the Country Exploration Manager, who is a Chartered Geologist and Fellow of the Geological Society of London, and a geologist with nineteen years of experience in the exploration and definition of precious and base metal mineral resources. Luc English is a full-time employee of Condor Gold plc and has sufficient experience which is relevant to the style of mineralization and type of deposit under consideration, and to the type of activity which he is undertaking to qualify as a Competent Person as defined in the June 2009 Edition of the AIM Note for Mining and Oil & Gas Companies. Luc English consents to the inclusion in the announcement of the matters based on their information in the form and context in which it appears and confirms that this information is accurate and not false or misleading.

For further information please visit www.condorgold.com.

About Condor Gold plc:

Condor Gold plc is an AIM listed exploration company focused on developing gold and silver resource projects in Central America. The Company was admitted to AIM on 31st May 2006 with the stated strategy to prove up CIM/JORC Resources in Nicaragua and El Salvador. Condor has eight 100% owned concessions in La India Mining District ("La India Project"); three 100% owned concessions in three other project areas and 20% in the Cerro Quiroz concession in Nicaragua. In El Salvador, Condor has 90% ownership of four licences in two project areas.

Condor's La India Project in Nicaragua currently contains a total attributable mineral resource of 18.4Mt at 3.9g/t for 2.33M oz gold and 2.68M oz silver at 6.2g/t to the CIM Code. Total gold equivalent of 2.37M oz. Including: Indicated mineral resource of 9.6Mt at 3.5g/t for 1.08M oz gold, Inferred mineral resource of 8.8Mt at 4.4g/t for 1.25M oz gold. Total open pit mineral resources of 1.14M oz gold at 3.1g/t. In El Salvador, Condor has an attributable 1,004,000 oz gold equivalent at 2.6g/t JORC compliant resource. The resource calculations are compiled by independent geologists SRK Consulting (UK) Limited for Nicaragua and Ravensgate and Geosure for El Salvador.

Disclaimer

Neither the contents of the Company's website nor the contents of any website accessible from hyperlinks on the Company's website (or any other website) is incorporated into, or forms part of, this announcement.

Technical Glossary


----------------------------------------------------------------------------
Assay             The laboratory test conducted to determine the proportion
                  of a mineral within a rock or other material. Usually
                  reported as parts per million which is equivalent to grams
                  of the mineral (i.e. gold) per tonne of rock
----------------------------------------------------------------------------
Auger             A devise used to collect unconsolidated soil or other
                  subsurface material by drilling either with a screw thread
                  or with a hollow core tube with a blade bit.
----------------------------------------------------------------------------
Breccia           A rock made up of angular rock fragments cemented together
                  by a finer grained matrix
----------------------------------------------------------------------------
                  The reporting standard adopted for the reporting of the
                  Mineral resources is that defined by the terms and
                  definitions given in the terminology, definitions and
                  guidelines given in the Canadian Institute of Mining,
CIM Code          Metallurgy and Petroleum (CIM) Standards on Mineral
                  resources and Mineral Reserves (December 2005) as required
                  by NI 43-101. The CIM Code is an internationally
                  recognised reporting code as defined by the Combined
                  Reserves International Reporting Standards Committee
----------------------------------------------------------------------------
Cross-cutting     Cross-cutting refers to the orientation of a structural
                  plane or lineament that intersects another plane or
                  lineament at an obtuse or perpendicular angle.
----------------------------------------------------------------------------
Dip               A line directed down the steepest axis of a planar
                  structure including a planar ore body or zone of
                  mineralisation. The dip has a measurable direction and
                  inclination from horizontal.
----------------------------------------------------------------------------
Epithermal        Mineral veins and ore deposited from fluids at shallow
                  depths at low pressure and temperatures ranging from 50-
                  300 degrees C
----------------------------------------------------------------------------
Feeder Pit        Smaller deposits that are physically separate from a main
                  deposit that can be mined independently from the main
                  area. These deposits typically simplify operational
                  planning.
----------------------------------------------------------------------------
Gold Equivalent   Gold equivalent grade is calculated by dividing the silver
                  assay result by 60, adding it to the gold value and
                  assuming 100% metallurgical recovery
----------------------------------------------------------------------------
Grade             The proportion of a mineral within a rock or other
                  material. For gold mineralisation this is usually reported
                  as grams of gold per tonne of rock (g/t)
----------------------------------------------------------------------------
g/t               grams per tonne
----------------------------------------------------------------------------
                  The rock adjacent to and above an ore or mineralised body
                  or geological fault. Note that on steeply-dipping tabular
Hanging wall      ore or mineralised bodies the hanging wall will be
                  inclined nearer to the vertical than horizontal.
----------------------------------------------------------------------------
Inferred Mineral  That part of a Mineral resource for which tonnage, grade
Resource          and mineral content can be estimated with a low level of
                  confidence. It is inferred from geological evidence and
                  assumed but not verified geological and/or grade
                  continuity. It is based on information gathered through
                  appropriate techniques from locations such as outcrops,
                  trenches, pits, workings and drill holes that may be
                  limited, or of uncertain quality and reliability
----------------------------------------------------------------------------
Indicated         That part of a Mineral resource for which tonnage,
resource          densities, shape, physical characteristics, grade and
                  mineral content can be estimated with a reasonable level
                  of confidence. It is based on exploration, sampling and
                  testing information gathered through appropriate
                  techniques from locations such as outcrops, trenches,
                  pits, workings and drill holes. The locations are too
                  widely or inappropriately spaced to confirm geological
                  and/or grade continuity but are spaced closely enough for
                  continuity to be assumed
----------------------------------------------------------------------------
Intercept         Refers to a sample or sequence of samples taken across the
                  entire width or an ore body or mineralized zone. The
                  intercept is described by the entire thickness and the
                  average grade of mineralisation
----------------------------------------------------------------------------
JORC              Australian Joint Ore Reserves Committee, common reference
                  to the Australasian Code for reporting of identified
                  mineral resources and ore reserves
----------------------------------------------------------------------------
koz               Thousand troy ounces
----------------------------------------------------------------------------
kt                Thousand tonnes
----------------------------------------------------------------------------
Mineral Resource  A concentration or occurrence of material of economic
                  interest in or on the Earth's crust in such a form,
                  quality, and quantity that there are reasonable and
                  realistic prospects for eventual economic extraction. The
                  location, quantity, grade, continuity and other geological
                  characteristics of a Mineral Resource are known, estimated
                  from specific geological knowledge, or interpreted from a
                  well constrained and portrayed geological model
----------------------------------------------------------------------------
Open pit mining   A method of extracting minerals from the earth by
                  excavating downwards from the surface such that the ore is
                  extracted in the open air (as opposed to underground
                  mining).
----------------------------------------------------------------------------
oz                Troy ounce, equivalent to 31.103477 grams
----------------------------------------------------------------------------
                  A common rock mineral composed of the elements silicon and
Quartz            oxygen.
----------------------------------------------------------------------------
Quartz breccia    Broken fragments of rock cemented together by a network of
                  quartz rock. The quartz is deposited from saturated
                  geothermal liquids filling the space between the rock
                  fragments.
----------------------------------------------------------------------------
Quartz veins      Deposit of quartz rock that develop in fractures and
                  fissures in the surrounding rock. They are deposited by
                  saturated geothermal liquids rising to the surface through
                  the cracks in the rock and then cooling, taking on the
                  shape of the cracks that they fill.
----------------------------------------------------------------------------
Rock chip         A sample of rock collected for analysis, from one or
                  several close spaced sample points at a location. Unless
                  otherwise stated, this type of sample is not
                  representative of the variation in grade across the width
                  of an ore or mineralised body and the assay results cannot
                  be used in a Mineral Resource Estimation
----------------------------------------------------------------------------
Stockwork         Multiple connected veins with more than one orientation,
                  typically consisting of millimetre to centimetre thick
                  fracture-fill veins and veinlets.
----------------------------------------------------------------------------
Strike length     The longest horizontal dimension of an ore body or zone of
                  mineralisation.
----------------------------------------------------------------------------
                  The excavation of a horizontally elongate pit (trench),
                  typically up to 2m deep and up to 1.5m wide in order to
                  access fresh or weathered bedrock and take channel samples
Trench            across a mineralised structure. The trench is normally
                  orientated such that samples taken along the longest wall
                  are perpendicular to the mineralised structure.
----------------------------------------------------------------------------
True width        The shortest axis of a body, usually perpendicular to the
                  longest plane. This often has to be calculated for channel
                  or drill samples where the sampling was not exactly
                  perpendicular to the long axis. The true width will always
                  be less than the apparent width of an obliquely intersect
                  sample.
----------------------------------------------------------------------------
Mt                Million tonnes
----------------------------------------------------------------------------
                  A sheet-like body of crystallised minerals within a rock,
                  generally forming in a discontinuity or crack between two
Vein              rock masses. Economic concentrations of gold are often
                  contained within vein minerals.
----------------------------------------------------------------------------
Wallrock          The rock adjacent to an ore or mineralised body or
                  geological fault.
----------------------------------------------------------------------------

Contacts:
Condor Gold plc
Mark Child
Executive Chairman and CEO
+44 (0) 20 7408 1067

Condor Gold plc
Luc English
Country Manager Nicaragua
+505 8854 0753
www.condorgold.com

Beaumont Cornish Limited
Roland Cornish
+44 (0) 20 7628 3396

Numis Securities Limited
John Prior and James Black
+44 (0) 20 72601000

Farm Street Media
Simon Robinson
+44 (0) 7593 340107

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Once the decision has been made to move part or all of a workload to the cloud, a methodology for selecting that workload needs to be established. How do you move to the cloud? What does the discovery, assessment and planning look like? What workloads make sense? Which cloud model makes sense for each workload? What are the considerations for how to select the right cloud model? And how does that fit in with the overall IT transformation?
You use an agile process; your goal is to make your organization more agile. But what about your data infrastructure? The truth is, today's databases are anything but agile - they are effectively static repositories that are cumbersome to work with, difficult to change, and cannot keep pace with application demands. Performance suffers as a result, and it takes far longer than it should to deliver new features and capabilities needed to make your organization competitive. As your application an...
17th Cloud Expo, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Meanwhile, 94% of enterprises a...
The recent trends like cloud computing, social, mobile and Internet of Things are forcing enterprises to modernize in order to compete in the competitive globalized markets. However, enterprises are approaching newer technologies with a more silo-ed way, gaining only sub optimal benefits. The Modern Enterprise model is presented as a newer way to think of enterprise IT, which takes a more holistic approach to embracing modern technologies.
SYS-CON Events announced today that SUSE, a pioneer in open source software, will exhibit at SYS-CON's DevOps Summit 2015 New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. SUSE provides reliable, interoperable Linux, cloud infrastructure and storage solutions that give enterprises greater control and flexibility. More than 20 years of engineering excellence, exceptional service and an unrivaled partner ecosystem power the products and support that help ...
Move from reactive to proactive cloud management in a heterogeneous cloud infrastructure. In his session at 16th Cloud Expo, Manoj Khabe, Innovative Solution-Focused Transformation Leader at Vicom Computer Services, Inc., will show how to replace a help desk-centric approach with an ITIL-based service model and service-centric CMDB that’s tightly integrated with an event and incident management platform. Learn how to expand the scope of operations management to service management. He will al...
The true value of the Internet of Things (IoT) lies not just in the data, but through the services that protect the data, perform the analysis and present findings in a usable way. With many IoT elements rooted in traditional IT components, Big Data and IoT isn’t just a play for enterprise. In fact, the IoT presents SMBs with the prospect of launching entirely new activities and exploring innovative areas. CompTIA research identifies several areas where IoT is expected to have the greatest impac...
There's no doubt that the Internet of Things is driving the next wave of innovation. Google has spent billions over the past few months vacuuming up companies that specialize in smart appliances and machine learning. Already, Philips light bulbs, Audi automobiles, and Samsung washers and dryers can communicate with and be controlled from mobile devices. To take advantage of the opportunities the Internet of Things brings to your business, you'll want to start preparing now.
In a world of ever-accelerating business cycles and fast-changing client expectations, the cloud increasingly serves as a growth engine and a path to new business models. Dynamic clouds enable businesses to continuously reinvent themselves, adapting their business processes, their service and software delivery and their operations to achieve speed-to-market and quick response to customer feedback. As the cloud evolves, the industry has multiple competing cloud technologies, offering on-premises ...
As the world moves from DevOps to NoOps, application deployment to the cloud ought to become a lot simpler. However, applications have been architected with a much tighter coupling than it needs to be which makes deployment in different environments and migration between them harder. The microservices architecture, which is the basis of many new age distributed systems such as OpenStack, Netflix and so on is at the heart of CloudFoundry – a complete developer-oriented Platform as a Service (PaaS...
T-Mobile has been transforming the wireless industry with its “Uncarrier” initiatives. Today as T-Mobile’s IT organization works to transform itself in a like manner, technical foundations built over the last couple of years are now key to their drive for more Agile delivery practices. In his session at DevOps Summit, Martin Krienke, Sr Development Manager at T-Mobile, will discuss where they started their Continuous Delivery journey, where they are today, and where they are going in an effort ...
SAP is delivering break-through innovation combined with fantastic user experience powered by the market-leading in-memory technology, SAP HANA. In his General Session at 15th Cloud Expo, Thorsten Leiduck, VP ISVs & Digital Commerce, SAP, discussed how SAP and partners provide cloud and hybrid cloud solutions as well as real-time Big Data offerings that help companies of all sizes and industries run better. SAP launched an application challenge to award the most innovative SAP HANA and SAP HANA...
There is no question that the cloud is where businesses want to host data. Until recently hypervisor virtualization was the most widely used method in cloud computing. Recently virtual containers have been gaining in popularity, and for good reason. In the debate between virtual machines and containers, the latter have been seen as the new kid on the block – and like other emerging technology have had some initial shortcomings. However, the container space has evolved drastically since coming on...
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect...
The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long development cycles that produce software that is obsolete at launch. DevOps may be disruptive, but it is essential. The DevOps Summit at Cloud Expo – to be held June 3-5, 2015, at the Javits Center in New York City – will expand the DevOps community, enable a wide...