Click here to close now.

SYS-CON MEDIA Authors: Elizabeth White, Mike Kavis, Jnan Dash, Liz McMillan, Carmen Gonzalez

News Feed Item

Highland Copper Reports Initial Resource Estimate for the 543S Deposit, Upper Peninsula, Michigan

LONGUEUIL, QUEBEC -- (Marketwired) -- 08/25/14 -- Highland Copper Company Inc. (TSX VENTURE:HI) ("Highland" or the "Company") is pleased to announce an initial resource estimate for the 543S copper deposit part of the Keweenaw Project located in the Keweenaw Peninsula of Michigan's Upper Peninsula (see Figure 1).


              543S Project - Base Case - Underground Scenario               
                   Mineral Resource Estimate - July 5, 2014                 
                                                                            
----------------------------------------------------------------------------
                 Cut-Off                                                    
                   Grade              Grade Grade             Grade         
Resource         Cu Eq.    Tonnage   Cu Eq.   Cu     Copper      Ag   Silver
Category             (%)  ('000 t)      (%)   (%)('000 lbs)   (g/t)('000 oz)
----------------------------------------------------------------------------
Indicated            1.9     1,518     3.31  3.27   109,514     5.1      248
----------------------------------------------------------------------------
Inferred             1.9       193     3.12  3.08    13,116     4.8       30
----------------------------------------------------------------------------

Notes on Mineral Resources


1.  Cu Equivalent = Cu% + (Ag g/t (i) 20$/oz (i) 80% (i) 90%) / (22.0462
    lbs/10kg (i) 3$/lb (i) 31.1035 g/oz (i) 90% (i) 96.5%) 
2.  Mineral Resources are reported using a copper price of 3$/lb and a
    silver price of 20$/oz 
3.  A payable rate of 96.5% for copper and 90% for silver was assumed 
4.  Preliminary metallurgical testing suggests recovery of 90% for copper
    and 80% for silver 
5.  Cut-off grade of 1.9% Cu Eq. was used 
6.  Underground mining costs are estimated at 57.27$/t of ore 
7.  Production costs are estimated at 37.50$/t of ore: 12.00$/t for
    processing, 2.50$/t for general and administrative costs, 0.50$/t for
    tailings and 22.50$/t for ore transportation to White Pine Complex 
8.  A 5% royalty was used (4.99$/t ore) 
9.  No mining dilution and mining loss were considered for the Mineral
    Resources 
10. Rock bulk densities are based on rock types, %Cu and proximity to
    specific gravity measurements 
11. Assay capping was applied to some mineralized domains 
12. Classification of Mineral Resources conforms to CIM definitions 
13. The qualified person for the estimate is Mr. Rejean Sirois, eng., Vice
    President Geology and Resources of G Mining. The estimate has an
    effective date of July 5, 2014 
14. Mineral resources, which are not mineral reserves, do not have
    demonstrated economic viability. The estimate of mineral resources may
    be materially affected by environmental, permitting, legal, title,
    taxation, sociopolitical, marketing, or other relevant issues. 
15. The quantity and grade of reported inferred resources in this estimation
    are uncertain in nature and there has been insufficient exploration to
    define these inferred resources as indicated or measured mineral
    resources. 

The mineral resource estimate was prepared by G Mining Services Inc. ("G Mining"), a Canadian mining consulting firm. After a detailed review of different options, Highland and G Mining have opted to report the mineral resources for potential underground development of the 543S deposit. This initial mineral resource estimate for the 543S copper deposit is based on 262 diamond drill holes totaling 45,608 m, of which 220 are NQ size and 42 HQ size, on a drill grid spaced 30.5 by 15 m.

Selection of cut-off grades and base case resource estimate

The table below, prepared by G Mining, shows the sensitivity of constrained underground resource estimates to the cut-off grade for the 543S resource.


 Sensitivity of the 543S Project - Constrained Underground Mineral Resource 
                         Estimate by Cut-Off Grades                         
                                                                            
----------------------------------------------------------------------------
Cut Off Grade                                                               
% Cu Eq.                                Indicated                           
             ---------------------------------------------------------------
                                               Copper                 Silver
                                Grade       Contained   Grade      Contained
              Tonnage     Grade    Cu           ('000      Ag          ('000
             ('000 t) Cu Eq.(%)   (%)            lbs)   (g/t)            oz)
----------------------------------------------------------------------------
5.0%              163      6.21  6.16          22,166     7.1             37
----------------------------------------------------------------------------
4.5%              246      5.71  5.67          30,790     6.4             51
----------------------------------------------------------------------------
4.0%              364      5.24  5.20          41,748     6.1             71
----------------------------------------------------------------------------
3.5%              508      4.81  4.78          53,532     5.7             94
----------------------------------------------------------------------------
3.0%              715      4.36  4.32          68,101     5.4            126
----------------------------------------------------------------------------
2.5%              995      3.90  3.87          84,838     5.3            169
----------------------------------------------------------------------------
2.0%            1,406      3.41  3.38         104,817     5.1            231
----------------------------------------------------------------------------
1.9%            1,518      3.31  3.27         109,514     5.1            248
----------------------------------------------------------------------------
1.5%            2,070      2.87  2.84         129,809     4.8            320
----------------------------------------------------------------------------
1.0%            3,136      2.31  2.29         158,142     4.4            444
----------------------------------------------------------------------------
0.5%            4,993      1.72  1.70         187,130     3.9            621
----------------------------------------------------------------------------

 Sensitivity of the 543S Project - Constrained Underground Mineral Resource 
                         Estimate by Cut-Off Grades                         
                                                                            
----------------------------------------------------------------------------
Cut Off Grade                                                               
% Cu Eq.                                 Inferred                           
             ---------------------------------------------------------------
                                               Copper                 Silver
                                Grade       Contained   Grade      Contained
              Tonnage     Grade    Cu           ('000      Ag          ('000
             ('000 t) Cu Eq.(%)   (%)            lbs)   (g/t)            oz)
----------------------------------------------------------------------------
5.0%               14      5.87  5.83           1,776     5.2              2
----------------------------------------------------------------------------
4.5%               27      5.30  5.27           3,163     5.1              4
----------------------------------------------------------------------------
4.0%               41      4.96  4.93           4,464     5.0              7
----------------------------------------------------------------------------
3.5%               59      4.58  4.55           5,960     4.8              9
----------------------------------------------------------------------------
3.0%               82      4.21  4.18           7,533     4.6             12
----------------------------------------------------------------------------
2.5%              112      3.81  3.78           9,359     4.8             17
----------------------------------------------------------------------------
2.0%              173      3.24  3.21          12,290     4.8             27
----------------------------------------------------------------------------
1.9%              193      3.12  3.08          13,116     4.8             30
----------------------------------------------------------------------------
1.5%              332      2.52  2.49          18,256     4.2             45
----------------------------------------------------------------------------
1.0%              751      1.79  1.77          29,267     4.0             97
----------------------------------------------------------------------------
0.5%            1,493      1.25  1.23          40,616     3.2            152
----------------------------------------------------------------------------

Mineral Resource Estimate Methodology

G Mining undertook the Mineral Resource estimate based on data provided by Highland. The estimate was conducted in a block model limited by eighteen mineralized domains interpreted and modelled as 3D wireframes. Capped raw assays were composited into regular 2.5-meter run lengths within each domain. Isotropic cubic blocks of 2.5 meters were used in the block model. Bulk densities were first estimated in each block based on regressions calculated from the correlation of 1,100 specific gravity measurements with their copper content, for three major rock types (flow-tops, dyke and basalt/host rock). Secondly, blocks within a 50 meter radius from specific gravity measurements, within the same rock type, were interpolated using those samples and were given a higher priority. Resulting estimated specific gravity of blocks inside domains varies from 2.52 g/cm3 to 3.04 g/cm3. Overburden density was set to a uniform 2.35 g/cm3. Copper and silver grades were estimated using the Inverse Distance Cube (ID3) interpolation method in three successive passes, which led to Indicated and Inferred Resources, limited by mineralized domains. The underground scenario resources were constrained by blocks with a minimum threshold value of 1.9% Cu equivalent, where isolated clusters of blocks were removed and an upper hard boundary was set at 15 m below the bedrock surface. Mineral Resources were classified according to the CIM Definition Standards on Mineral Resources and Mineral Reserves.

Metallurgical Work

A.C.A. Howe International first completed historical preliminary metallurgical studies in 1991 at the Institute of Materials Processing of Michigan Technological University on three samples of chalcocite from the 543S deposit. Concentrate grades from conventional flotation tests demonstrated over 40% Cu and recoveries over 90% were achievable at grinds between 200 and 270 mesh when combined with cleaning and re-cleaning of the rougher concentrates. A ball mill grindability work index of a composite of 19.36 KWh/t was also reported.

In February 2014 seven flotation tests were conducted on composite samples of drill core from the 543S deposit at SGS Laboratories in Lakefield, Ontario under the supervision of Ahmed Bouajila, Vice President, Metallurgy and Ore Processing for G Mining. The composite grade was 2.61% Cu and 3.9 g/t Ag. Copper recoveries reported for this work neglect the copper distribution contained in the cleaner tailings. In a continuous circuit the cleaner tailings would be re-circulated back to the rougher and cleaner flotation stages, respectively and a substantial part of it would be recovered in the final concentrate. The effect of this recirculation cannot be determined without running locked cycle tests or continuous pilot plant trials. It is concluded that reasonable expectation from an equivalent optimized and closed circuit would be:


--  Recoveries: 90% Cu, 80% Ag; 
--  Concentrate grades: 44%Cu, 59g/t Ag ; and 
--  Mass Pull: 5.5%. 

Those numbers are used for the base case reported in this news release.

Geology of the 543S Deposit.

The 543S copper deposit is located within a zone of chalcocite-dominated copper mineralization that is unique to the Keweenaw Peninsula. The known chalcocite deposits in the Keweenaw region occur in a 30 kilometer long northeast-southwest trending belt located between the native copper-bearing lodes and the underlying Keweenaw Fault and hosted by the Portage Lake Lava series. Chalcocite mineralization primarily occurs as open space fillings in amygdaloidal and fragmental basalt flow tops. Historically, this type of mineralization has not been a major exploration target. The 543S deposit is the largest chalcocite occurrence found to date.

The basalt flows in the area of the 543S deposit are covered by up to 50 meters of glacial till and do not outcrop in the vicinity of the deposit. The flows have an average thickness of approximately 33 meters and are cut by two fine grained sill-like dacitic to andesitic subvolcanic intrusives (see Fig. 2). At the 543S copper deposit, more than 99% of the copper occurs in the mineral chalcocite and less than 1% is present as bornite, chalcopyrite, or as native copper. Traces of native silver are also present. Approximately 80 to 90% of chalcocite mineralization is concentrated in flow top breccias and amygdaloids where grades are the highest.

Future Plans

The 543S deposit is one of two lava flow top-hosted chalcocite deposits that have been subject to recent drilling programs by Highland, the other is the G-2 deposit located about 20 kilometers northeast of 543S. Highland plans to complete a resource estimate for G-2 in 2014. Although the possibility of an independent milling complex at 543S treating mineralization from both 543S and G-2 will be considered, Highland plans to evaluate alternatives that would treat mineralization from 543S and other undeveloped copper deposits in the Western Upper Peninsula of Michigan recently acquired by Highland, in a single center of metallurgical operations. Planned studies will evaluate an alternative that would involve transportation to and processing of mineralization from these deposits in a central mine and metallurgical complex, the location of which remains to be determined.

Qualified Persons

Rejean Sirois, Vice President of Geology and Resources for G Mining is the qualified person, as defined in National Instrument 43-101, responsible for the mineral resource estimate for the 543S deposit as reported herein. He has read and approved the relevant technical portions of this news release related to the mineral resource estimate for which he is responsible.

Ahmed Bouajila, Vice President, Metallurgy and Ore Processing for G Mining is the qualified person, as defined in National Instrument 43-101, responsible for supervising initial metallurgical test work on samples from the 543S deposit as reported herein. He has read and approved the relevant technical portions of this news release related to the metallurgical work for which he is responsible.

The balance of the technical information contained in this news release has been reviewed and approved by Ross R. Grunwald, PhD., VP Exploration for the Company. Dr. Grunwald is a qualified person as defined in NI 43-101.

G Mining is completing a National Instrument 43-101 technical report for the mineral resource estimate to be filed on SEDAR within 45 days of this press release.

Keweenaw Copper Project

The 543S deposit is part of the Keweenaw Copper Project that covers approximately 9,000 acres of mineral rights and is being explored under a Mining Venture Agreement between Highland and BRP LLC. The agreement allows Highland to earn a 65 percent interest by spending US$11.5 million on the project (which amount has been spent) and providing a feasibility study by October 26, 2015. The Keweenaw Project is approximately 180 km northeast of the White Pine North Project and 250 km of the Copperwood Project by road access.

Cautionary Statement

Mineral resources are not mineral reserves and do not have demonstrated economic viability. The terms "inferred" and "indicated" resources contains in this press release are recognized and required by NI 43-101 under Canadian regulations, but not recognized by the U.S. Securities and Exchange Commission ("SEC"). The SEC requires mining companies in their filings with the SEC to disclose only those mineral deposits that a company can economically and legally extract or produce. "Inferred resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an "inferred resource" will ever be upgraded to a higher category. Investors are cautioned not to assume that all or part of an inferred resource exists, or is economically or legally mineable and that all or any part of mineral deposits in the "measured" or "indicated" resource categories will ever be converted into reserves.

This press release contains 'forward-looking information' within the meaning of applicable Canadian securities legislation. Forward looking information in this news release includes information with respect to: the mineral resource estimate; the Company's plans to complete a mineral resource estimate at the G2 deposit; the timing and results of future studies; the geological and economic potential of the Keweenaw Project, including the possibility of developing an underground operation there; the potential to process mineralization with other deposits in a central mine; the completion of a feasibility study to earn 65% of the Keweenaw Project, and other statements and information regarding anticipated results regarding the Company's operations and exploration. Actual results may be materially different from those currently anticipated. Many factors, known and unknown, could cause the actual results to be materially different from those expressed or implied by such forward looking statements. Such risks include, but are not limited to: the volatility of copper price; the uncertainty of exploration results and mineral resource estimates, capital expenditure requirements and other costs; the uncertainties related to the Company's ability to acquire a 65% interest in the Keweenaw Project; currency fluctuations; the availability of financing for additional capital requirements, cost of exploration and development programs; mining risks; risks associated with governmental and environmental regulation and obtaining all the necessary permits for the development of the Project; and risks associated with global economic growth. The Company does not intend, and does not assume any obligation, to update these forward-looking statements and information, except as required by law. Accordingly, readers are advised not to place undue reliance on forward-looking statements.

About Highland

Highland Copper Company Inc. is a Canadian exploration company focused on exploring and developing copper projects within the Upper Peninsula of Michigan, U.S.A. Highland has recently completed the acquisition of the Copperwood Project and the interim closing of the White Pine Project. The common shares of Highland trade on the TSX Venture Exchange under the symbol 'HI'. Additional information about the Company is available on the Company's website at www.highlandcopper.com and on SEDAR at www.sedar.com.

Figures are available at the following address: http://file.marketwire.com/release/hi_0825.pdf

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
SYS-CON Events announced today that SoftLayer, an IBM company, has been named “Gold Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place June 9-11, 2015 at the Javits Center in New York City, NY, and the 17th International Cloud Expo®, which will take place November 3–5, 2015 at the Santa Clara Convention Center in Santa Clara, CA. SoftLayer operates a global cloud infrastructure platform built for Internet scale. With a global footprint of data centers and network points...
@ThingsExpo has been named the Top 5 Most Influential M2M Brand by Onalytica in the ‘Machine to Machine: Top 100 Influencers and Brands.' Onalytica analyzed the online debate on M2M by looking at over 85,000 tweets to provide the most influential individuals and brands that drive the discussion. According to Onalytica the "analysis showed a very engaged community with a lot of interactive tweets. The M2M discussion seems to be more fragmented and driven by some of the major brands present in the...
SYS-CON Events announced today that Cisco, the worldwide leader in IT that transforms how people connect, communicate and collaborate, has been named “Gold Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Cisco makes amazing things happen by connecting the unconnected. Cisco has shaped the future of the Internet by becoming the worldwide leader in transforming how people connect, communicate and collaborat...
SYS-CON Events announced today that Liaison Technologies, a leading provider of data management and integration cloud services and solutions, has been named "Silver Sponsor" of SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York, NY. Liaison Technologies is a recognized market leader in providing cloud-enabled data integration and data management solutions to break down complex information barriers, enabling enterprises to make sm...
Modern Systems announced completion of a successful project with its new Rapid Program Modernization (eavRPMa"c) software. The eavRPMa"c technology architecturally transforms legacy applications, enabling faster feature development and reducing time-to-market for critical software updates. Working with Modern Systems, the University of California at Santa Barbara (UCSB) leveraged eavRPMa"c to transform its Student Information System from Software AG's Natural syntax to a modern application lev...
PubNub on Wednesday released an open source template to allow developers to add Skype-like video chat into their apps. The free template provides a fully functional video chat platform using WebRTC, PubNub and Google Authentication for a global, reliable collaboration solution. “While the WebRTC protocol has created huge excitement as a way to deliver video chat ubiquitously, there’s still a gap between the protocol itself and the ability to deploy a working, globally scaled, collaboration appl...
WebRTC Summit has announced today that Peter Dunkley has been named summit chair of WebRTC Summit 2015 New York. The 4th International WebRTC Summit will take place on June 9-11, 2015, at the Javits Center in Manhattan, New York. @ThingsExpo anticipates 90% of WebRTC companies & developers will monetize their products & services through IoT by 2016. Peter Dunkley is Technical Director at Acision. He graduated from The University of Edinburgh in 2000 with a BSc (Hons) in Computer Science...
SYS-CON Media announced today that Blue Box as launched a popular blog feed on Cloud Computing Journal. Cloud Computing Journal aims to help open the eyes of Enterprise IT professionals to the economics and strategies that utility/cloud computing provides. Blue Box Cloud gives you unequaled agility, without the burden of designing, deploying and managing your own infrastructure. It’s the right choice when public cloud just won’t do. Blue Box Cloud is a managed Private Cloud as a Service (...
Participants will reach the final if their IoT solution is liked. A community vote will determine the best solutions submitted in each country, after which an expert jury will select the national winners and the best international IoT solution. Each country's best solution can win a national marketing campaign worth up to €30,000 and become a partner in Deutsche Telekom's participating markets. The winning international solution can become partner of Deutsche Telekom Group across all eight coun...
Recent technology advances in miniaturization has positioned the wearables as the pinnacle of technology convergence with the human body. We inquire if wearables are mere standard miniaturized devices extended with the connectivity and present our views on considerations like design, applications, performance, efficiency, interoperability, usage scenarios, human device interaction and consequent trade-offs enabling wearables to impart optimal value.
SYS-CON Events announced today that Windstream, a leading provider of advanced network and cloud communications, has been named “Silver Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9–11, 2015, at the Javits Center in New York, NY. Windstream (Nasdaq: WIN), a FORTUNE 500 and S&P 500 company, is a leading provider of advanced network communications, including cloud computing and managed services, to businesses nationwide. The company also offers broadband, p...
In this session we look at creating interactive communications via the web by adding messaging, file transfer, and group communication (group chat and audio/video conferencing) into the web experience. We will also discuss potential applications of this technology in areas including B2B, B2C, P2P, and gaming. Peter is Technical Director at Acision. He graduated from The University of Edinburgh in 2000 with a BSc (Hons) in Computer Science. After graduation Peter worked on a PSTN switch dev...
SYS-CON Events announced today that Stratoscale, the new data center operating system, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Based in Herzeliya, Israel, Stratoscale is redefining the data center, developing a hardware-agnostic, software platform hyper-converging compute, storage and networking across the rack or data center. The self-optimizing platform automatically distributes all physical...
Many of the well-known examples of DevOps success we read in blogs on the Internet paint an idyllic picture of DevOps productivity. A team was facing a stodgy, slow-moving operations department, teams weren’t delivering software on time. Those teams moved to DevOps, became proactive about infrastructure and deployment automation, and an overnight transition to productivity ensues. People are promoted, projects are successful, and developers and system administrators dance hand-in-hand in a final...
SYS-CON Events announced today that ProfitBricks, the provider of painless cloud infrastructure, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY., and the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. ProfitBricks is the IaaS provider that offers a painless cloud experience for all IT users, with no learning curve. ...